3
2
# install - install a program, script, or datafile
4
# This comes from X11R5 (mit/util/scripts/install.sh).
6
# Copyright 1991 by the Massachusetts Institute of Technology
8
# Permission to use, copy, modify, distribute, and sell this software and its
9
# documentation for any purpose is hereby granted without fee, provided that
10
# the above copyright notice appear in all copies and that both that
11
# copyright notice and this permission notice appear in supporting
12
# documentation, and that the name of M.I.T. not be used in advertising or
13
# publicity pertaining to distribution of the software without specific,
14
# written prior permission. M.I.T. makes no representations about the
15
# suitability of this software for any purpose. It is provided "as is"
16
# without express or implied warranty.
4
scriptversion=2005-05-14.22
6
# This originates from X11R5 (mit/util/scripts/install.sh), which was
7
# later released in X11R6 (xc/config/util/install.sh) with the
8
# following copyright and license.
10
# Copyright (C) 1994 X Consortium
12
# Permission is hereby granted, free of charge, to any person obtaining a copy
13
# of this software and associated documentation files (the "Software"), to
14
# deal in the Software without restriction, including without limitation the
15
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
16
# sell copies of the Software, and to permit persons to whom the Software is
17
# furnished to do so, subject to the following conditions:
19
# The above copyright notice and this permission notice shall be included in
20
# all copies or substantial portions of the Software.
22
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
23
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
24
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
25
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
26
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
27
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
29
# Except as contained in this notice, the name of the X Consortium shall not
30
# be used in advertising or otherwise to promote the sale, use or other deal-
31
# ings in this Software without prior written authorization from the X Consor-
35
# FSF changes to this file are in the public domain.
18
37
# Calling this script install-sh is preferred over install.sh, to prevent
19
38
# `make' implicit rules from creating a file called install from it
41
58
rmprog="${RMPROG-rm}"
42
59
mkdirprog="${MKDIRPROG-mkdir}"
47
61
chmodcmd="$chmodprog 0755"
57
while [ x"$1" != x ]; do
67
-m) chmodcmd="$chmodprog $2"
72
-o) chowncmd="$chownprog $2"
77
-g) chgrpcmd="$chgrpprog $2"
82
-s) stripcmd="$stripprog"
86
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
90
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
98
# this colon is to work around a 386BSD /bin/sh bug
73
usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
74
or: $0 [OPTION]... SRCFILES... DIRECTORY
75
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
76
or: $0 [OPTION]... -d DIRECTORIES...
78
In the 1st form, copy SRCFILE to DSTFILE.
79
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
80
In the 4th, create DIRECTORIES.
84
-d create directories instead of installing files.
85
-g GROUP $chgrpprog installed files to GROUP.
86
-m MODE $chmodprog installed files to MODE.
87
-o USER $chownprog installed files to USER.
88
-s $stripprog installed files.
89
-t DIRECTORY install into DIRECTORY.
90
-T report an error if DSTFILE is a directory.
91
--help display this help and exit.
92
--version display version info and exit.
94
Environment variables override the default commands:
95
CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
98
while test -n "$1"; do
107
-g) chgrpcmd="$chgrpprog $2"
112
--help) echo "$usage"; exit $?;;
114
-m) chmodcmd="$chmodprog $2"
119
-o) chowncmd="$chownprog $2"
124
-s) stripcmd=$stripprog
133
-T) no_target_directory=true
137
--version) echo "$0 $scriptversion"; exit $?;;
139
*) # When -d is used, all remaining arguments are directories to create.
140
# When -t is used, the destination is already specified.
141
test -n "$dir_arg$dstarg" && break
142
# Otherwise, the last argument is the destination. Remove it from $@.
145
if test -n "$dstarg"; then
146
# $@ is not empty: it contains at least $arg.
147
set fnord "$@" "$dstarg"
157
if test -z "$1"; then
158
if test -z "$dir_arg"; then
159
echo "$0: no input file specified." >&2
162
# It's OK to call `install-sh -d' without argument.
163
# This can happen when creating conditional directories.
169
# Protect names starting with `-'.
174
if test -n "$dir_arg"; then
178
if test -d "$dst"; then
185
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
186
# might cause directories to be created, which would be especially bad
187
# if $src (and thus $dsttmp) contains '*'.
188
if test ! -f "$src" && test ! -d "$src"; then
189
echo "$0: $src does not exist." >&2
193
if test -z "$dstarg"; then
194
echo "$0: no destination specified." >&2
199
# Protect names starting with `-'.
109
echo "install: no input file specified"
204
# If destination is a directory, append the input filename; won't work
205
# if double slashes aren't ignored.
206
if test -d "$dst"; then
207
if test -n "$no_target_directory"; then
208
echo "$0: $dstarg: Is a directory" >&2
115
if [ x"$dir_arg" != x ]; then
126
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
127
# might cause directories to be created, which would be especially bad
128
# if $src (and thus $dsttmp) contains '*'.
130
if [ -f $src -o -d $src ]
134
echo "install: $src does not exist"
140
echo "install: no destination specified"
146
# If destination is a directory, append the input filename; if your system
147
# does not like double slashes in filenames, you may need to add some logic
151
dst="$dst"/`basename $src`
157
## this sed command emulates the dirname command
158
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
160
# Make sure that the destination directory exists.
161
# this part is taken from Noah Friedman's mkinstalldirs script
163
# Skip lots of stat calls in the usual case.
164
if [ ! -d "$dstdir" ]; then
167
IFS="${IFS-${defaultIFS}}"
170
# Some sh's can't handle IFS=/ for some reason.
172
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
177
while [ $# -ne 0 ] ; do
178
pathcomp="${pathcomp}${1}"
181
if [ ! -d "${pathcomp}" ] ;
183
$mkdirprog "${pathcomp}"
188
pathcomp="${pathcomp}/"
211
dst=$dst/`basename "$src"`
215
# This sed command emulates the dirname command.
216
dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
218
# Make sure that the destination directory exists.
220
# Skip lots of stat calls in the usual case.
221
if test ! -d "$dstdir"; then
224
IFS="${IFS-$defaultIFS}"
227
# Some sh's can't handle IFS=/ for some reason.
229
set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
235
while test $# -ne 0 ; do
238
if test ! -d "$pathcomp"; then
239
$mkdirprog "$pathcomp"
240
# mkdir can fail with a `File exist' error in case several
241
# install-sh are creating the directory concurrently. This
243
test -d "$pathcomp" || exit
249
if test -n "$dir_arg"; then
250
$doit $mkdircmd "$dst" \
251
&& { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
252
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
253
&& { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
254
&& { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
257
dstfile=`basename "$dst"`
259
# Make a couple of temp file names in the proper directory.
260
dsttmp=$dstdir/_inst.$$_
261
rmtmp=$dstdir/_rm.$$_
263
# Trap to clean up those temp files at exit.
264
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
265
trap '(exit $?); exit' 1 2 13 15
267
# Copy the file name to the temp name.
268
$doit $cpprog "$src" "$dsttmp" &&
270
# and set any options; do chmod last to preserve setuid bits.
272
# If any of these fail, we abort the whole thing. If we want to
273
# ignore errors from any of these, just make sure not to ignore
274
# errors from the above "$doit $cpprog $src $dsttmp" command.
276
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
277
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
278
&& { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
279
&& { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
281
# Now rename the file to the real destination.
282
{ $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
284
# The rename failed, perhaps because mv can't rename something else
285
# to itself, or perhaps because mv is so ancient that it does not
288
# Now remove or move aside any old file at destination location.
289
# We try this two ways since rm can't unlink itself on some
290
# systems and the destination file might be busy for other
291
# reasons. In this case, the final cleanup might fail but the new
292
# file should still install successfully.
294
if test -f "$dstdir/$dstfile"; then
295
$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
296
|| $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
298
echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
306
# Now rename the file to the real destination.
307
$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
310
fi || { (exit 1); exit 1; }
192
if [ x"$dir_arg" != x ]
194
$doit $instcmd $dst &&
196
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
197
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
198
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
199
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
202
# If we're going to rename the final executable, determine the name now.
204
if [ x"$transformarg" = x ]
206
dstfile=`basename $dst`
208
dstfile=`basename $dst $transformbasename |
209
sed $transformarg`$transformbasename
212
# don't allow the sed command to completely eliminate the filename
214
if [ x"$dstfile" = x ]
216
dstfile=`basename $dst`
221
# Make a temp file name in the proper directory.
223
dsttmp=$dstdir/#inst.$$#
225
# Move or copy the file name to the temp name
227
$doit $instcmd $src $dsttmp &&
229
trap "rm -f ${dsttmp}" 0 &&
231
# and set any options; do chmod last to preserve setuid bits
233
# If any of these fail, we abort the whole thing. If we want to
234
# ignore errors from any of these, just make sure not to ignore
235
# errors from the above "$doit $instcmd $src $dsttmp" command.
237
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
238
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
239
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
240
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
242
# Now rename the file to the real destination.
244
$doit $rmcmd -f $dstdir/$dstfile &&
245
$doit $mvcmd $dsttmp $dstdir/$dstfile
313
# The final little trick to "correctly" pass the exit status to the exit trap.
319
# eval: (add-hook 'write-file-hooks 'time-stamp)
320
# time-stamp-start: "scriptversion="
321
# time-stamp-format: "%:y-%02m-%02d.%02H"
322
# time-stamp-end: "$"