summaryrefslogtreecommitdiffstats
path: root/setup/projects/katrin/files/etc/apache2-kaas
diff options
context:
space:
mode:
Diffstat (limited to 'setup/projects/katrin/files/etc/apache2-kaas')
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf.d/README9
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf.d/autoindex.conf94
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf.d/ssl.conf217
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf.d/userdir.conf36
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf.d/welcome.conf18
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-base.conf67
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-dav.conf3
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-lua.conf1
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-mpm.conf19
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-optional.conf20
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-proxy.conf16
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-ssl.conf1
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-systemd.conf2
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/01-cgi.conf14
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf/httpd.conf353
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas/conf/magic385
l---------setup/projects/katrin/files/etc/apache2-kaas/logs1
l---------setup/projects/katrin/files/etc/apache2-kaas/modules1
l---------setup/projects/katrin/files/etc/apache2-kaas/run1
19 files changed, 0 insertions, 1258 deletions
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/README b/setup/projects/katrin/files/etc/apache2-kaas/conf.d/README
deleted file mode 100644
index f5e9661..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/README
+++ /dev/null
@@ -1,9 +0,0 @@
-
-This directory holds configuration files for the Apache HTTP Server;
-any files in this directory which have the ".conf" extension will be
-processed as httpd configuration files. The directory is used in
-addition to the directory /etc/httpd/conf.modules.d/, which contains
-configuration files necessary to load modules.
-
-Files are processed in alphabetical order.
-
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/autoindex.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.d/autoindex.conf
deleted file mode 100644
index 55f658e..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/autoindex.conf
+++ /dev/null
@@ -1,94 +0,0 @@
-#
-# Directives controlling the display of server-generated directory listings.
-#
-# Required modules: mod_authz_core, mod_authz_host,
-# mod_autoindex, mod_alias
-#
-# To see the listing of a directory, the Options directive for the
-# directory must include "Indexes", and the directory must not contain
-# a file matching those listed in the DirectoryIndex directive.
-#
-
-#
-# IndexOptions: Controls the appearance of server-generated directory
-# listings.
-#
-IndexOptions FancyIndexing HTMLTable VersionSort
-
-# We include the /icons/ alias for FancyIndexed directory listings. If
-# you do not use FancyIndexing, you may comment this out.
-#
-Alias /icons/ "/opt/rh/httpd24/root/usr/share/httpd/icons/"
-
-<Directory "/opt/rh/httpd24/root/usr/share/httpd/icons">
- Options Indexes MultiViews FollowSymlinks
- AllowOverride None
- Require all granted
-</Directory>
-
-#
-# AddIcon* directives tell the server which icon to show for different
-# files or filename extensions. These are only displayed for
-# FancyIndexed directories.
-#
-AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
-
-AddIconByType (TXT,/icons/text.gif) text/*
-AddIconByType (IMG,/icons/image2.gif) image/*
-AddIconByType (SND,/icons/sound2.gif) audio/*
-AddIconByType (VID,/icons/movie.gif) video/*
-
-AddIcon /icons/binary.gif .bin .exe
-AddIcon /icons/binhex.gif .hqx
-AddIcon /icons/tar.gif .tar
-AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
-AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
-AddIcon /icons/a.gif .ps .ai .eps
-AddIcon /icons/layout.gif .html .shtml .htm .pdf
-AddIcon /icons/text.gif .txt
-AddIcon /icons/c.gif .c
-AddIcon /icons/p.gif .pl .py
-AddIcon /icons/f.gif .for
-AddIcon /icons/dvi.gif .dvi
-AddIcon /icons/uuencoded.gif .uu
-AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
-AddIcon /icons/tex.gif .tex
-AddIcon /icons/bomb.gif /core
-AddIcon /icons/bomb.gif */core.*
-
-AddIcon /icons/back.gif ..
-AddIcon /icons/hand.right.gif README
-AddIcon /icons/folder.gif ^^DIRECTORY^^
-AddIcon /icons/blank.gif ^^BLANKICON^^
-
-#
-# DefaultIcon is which icon to show for files which do not have an icon
-# explicitly set.
-#
-DefaultIcon /icons/unknown.gif
-
-#
-# AddDescription allows you to place a short description after a file in
-# server-generated indexes. These are only displayed for FancyIndexed
-# directories.
-# Format: AddDescription "description" filename
-#
-#AddDescription "GZIP compressed document" .gz
-#AddDescription "tar archive" .tar
-#AddDescription "GZIP compressed tar archive" .tgz
-
-#
-# ReadmeName is the name of the README file the server will look for by
-# default, and append to directory listings.
-#
-# HeaderName is the name of a file which should be prepended to
-# directory indexes.
-ReadmeName README.html
-HeaderName HEADER.html
-
-#
-# IndexIgnore is a set of filenames which directory indexing should ignore
-# and not include in the listing. Shell-style wildcarding is permitted.
-#
-IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
-
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/ssl.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.d/ssl.conf
deleted file mode 100644
index a70324b..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/ssl.conf
+++ /dev/null
@@ -1,217 +0,0 @@
-#
-# When we also provide SSL we have to listen to the
-# the HTTPS port in addition.
-#
-Listen 0.0.0.0:8443 https
-
-##
-## SSL Global Context
-##
-## All SSL configuration in this context applies both to
-## the main server and all SSL-enabled virtual hosts.
-##
-
-# Pass Phrase Dialog:
-# Configure the pass phrase gathering process.
-# The filtering dialog program (`builtin' is a internal
-# terminal dialog) has to provide the pass phrase on stdout.
-SSLPassPhraseDialog builtin
-
-# Inter-Process Session Cache:
-# Configure the SSL Session Cache: First the mechanism
-# to use and second the expiring timeout (in seconds).
-SSLSessionCache shmcb:/opt/rh/httpd24/root/var/run/httpd/sslcache(512000)
-SSLSessionCacheTimeout 300
-
-# Pseudo Random Number Generator (PRNG):
-# Configure one or more sources to seed the PRNG of the
-# SSL library. The seed data should be of good random quality.
-# WARNING! On some platforms /dev/random blocks if not enough entropy
-# is available. This means you then cannot use the /dev/random device
-# because it would lead to very long connection times (as long as
-# it requires to make more entropy available). But usually those
-# platforms additionally provide a /dev/urandom device which doesn't
-# block. So, if available, use this one instead. Read the mod_ssl User
-# Manual for more details.
-SSLRandomSeed startup file:/dev/urandom 256
-SSLRandomSeed connect builtin
-#SSLRandomSeed startup file:/dev/random 512
-#SSLRandomSeed connect file:/dev/random 512
-#SSLRandomSeed connect file:/dev/urandom 512
-
-#
-# Use "SSLCryptoDevice" to enable any supported hardware
-# accelerators. Use "openssl engine -v" to list supported
-# engine names. NOTE: If you enable an accelerator and the
-# server does not start, consult the error logs and ensure
-# your accelerator is functioning properly.
-#
-SSLCryptoDevice builtin
-#SSLCryptoDevice ubsec
-
-##
-## SSL Virtual Host Context
-##
-
-<VirtualHost _default_:8443>
-
-# General setup for the virtual host, inherited from global configuration
-#DocumentRoot "/var/www/html"
-#ServerName www.example.com:8443
-
-# Use separate log files for the SSL virtual host; note that LogLevel
-# is not inherited from httpd.conf.
-ErrorLog |/usr/bin/cat
-TransferLog |/usr/bin/cat
-LogLevel warn
-
-# SSL Engine Switch:
-# Enable/Disable SSL for this virtual host.
-SSLEngine on
-
-# SSL Protocol support:
-# List the enable protocol levels with which clients will be able to
-# connect. Disable SSLv2 access by default:
-SSLProtocol all -SSLv2
-
-# SSL Cipher Suite:
-# List the ciphers that the client is permitted to negotiate.
-# See the mod_ssl documentation for a complete list.
-SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
-
-# Speed-optimized SSL Cipher configuration:
-# If speed is your main concern (on busy HTTPS servers e.g.),
-# you might want to force clients to specific, performance
-# optimized ciphers. In this case, prepend those ciphers
-# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
-# Caveat: by giving precedence to RC4-SHA and AES128-SHA
-# (as in the example below), most connections will no longer
-# have perfect forward secrecy - if the server's key is
-# compromised, captures of past or future traffic must be
-# considered compromised, too.
-#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
-#SSLHonorCipherOrder on
-
-# Server Certificate:
-# Point SSLCertificateFile at a PEM encoded certificate. If
-# the certificate is encrypted, then you will be prompted for a
-# pass phrase. Note that a kill -HUP will prompt again. A new
-# certificate can be generated using the genkey(1) command.
-SSLCertificateFile /etc/pki/tls/certs/localhost.crt
-
-# Server Private Key:
-# If the key is not combined with the certificate, use this
-# directive to point at the key file. Keep in mind that if
-# you've both a RSA and a DSA private key you can configure
-# both in parallel (to also allow the use of DSA ciphers, etc.)
-SSLCertificateKeyFile /etc/pki/tls/private/localhost.key
-
-# Server Certificate Chain:
-# Point SSLCertificateChainFile at a file containing the
-# concatenation of PEM encoded CA certificates which form the
-# certificate chain for the server certificate. Alternatively
-# the referenced file can be the same as SSLCertificateFile
-# when the CA certificates are directly appended to the server
-# certificate for convinience.
-#SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
-
-# Certificate Authority (CA):
-# Set the CA certificate verification path where to find CA
-# certificates for client authentication or alternatively one
-# huge file containing all of them (file must be PEM encoded)
-#SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt
-
-# Client Authentication (Type):
-# Client certificate verification type and depth. Types are
-# none, optional, require and optional_no_ca. Depth is a
-# number which specifies how deeply to verify the certificate
-# issuer chain before deciding the certificate is not valid.
-#SSLVerifyClient require
-#SSLVerifyDepth 10
-
-# Access Control:
-# With SSLRequire you can do per-directory access control based
-# on arbitrary complex boolean expressions containing server
-# variable checks and other lookup directives. The syntax is a
-# mixture between C and Perl. See the mod_ssl documentation
-# for more details.
-#<Location />
-#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
-# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
-# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
-# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
-# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
-# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
-#</Location>
-
-# SSL Engine Options:
-# Set various options for the SSL engine.
-# o FakeBasicAuth:
-# Translate the client X.509 into a Basic Authorisation. This means that
-# the standard Auth/DBMAuth methods can be used for access control. The
-# user name is the `one line' version of the client's X.509 certificate.
-# Note that no password is obtained from the user. Every entry in the user
-# file needs this password: `xxj31ZMTZzkVA'.
-# o ExportCertData:
-# This exports two additional environment variables: SSL_CLIENT_CERT and
-# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
-# server (always existing) and the client (only existing when client
-# authentication is used). This can be used to import the certificates
-# into CGI scripts.
-# o StdEnvVars:
-# This exports the standard SSL/TLS related `SSL_*' environment variables.
-# Per default this exportation is switched off for performance reasons,
-# because the extraction step is an expensive operation and is usually
-# useless for serving static content. So one usually enables the
-# exportation for CGI and SSI requests only.
-# o StrictRequire:
-# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
-# under a "Satisfy any" situation, i.e. when it applies access is denied
-# and no other module can change it.
-# o OptRenegotiate:
-# This enables optimized SSL connection renegotiation handling when SSL
-# directives are used in per-directory context.
-#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
-<Files ~ "\.(cgi|shtml|phtml|php3?)$">
- SSLOptions +StdEnvVars
-</Files>
-<Directory "/var/www/cgi-bin">
- SSLOptions +StdEnvVars
-</Directory>
-
-# SSL Protocol Adjustments:
-# The safe and default but still SSL/TLS standard compliant shutdown
-# approach is that mod_ssl sends the close notify alert but doesn't wait for
-# the close notify alert from client. When you need a different shutdown
-# approach you can use one of the following variables:
-# o ssl-unclean-shutdown:
-# This forces an unclean shutdown when the connection is closed, i.e. no
-# SSL close notify alert is send or allowed to received. This violates
-# the SSL/TLS standard but is needed for some brain-dead browsers. Use
-# this when you receive I/O errors because of the standard approach where
-# mod_ssl sends the close notify alert.
-# o ssl-accurate-shutdown:
-# This forces an accurate shutdown when the connection is closed, i.e. a
-# SSL close notify alert is send and mod_ssl waits for the close notify
-# alert of the client. This is 100% SSL/TLS standard compliant, but in
-# practice often causes hanging connections with brain-dead browsers. Use
-# this only for browsers where you know that their SSL implementation
-# works correctly.
-# Notice: Most problems of broken clients are also related to the HTTP
-# keep-alive facility, so you usually additionally want to disable
-# keep-alive for those clients, too. Use variable "nokeepalive" for this.
-# Similarly, one has to force some clients to use HTTP/1.0 to workaround
-# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
-# "force-response-1.0" for this.
-BrowserMatch "MSIE [2-5]" \
- nokeepalive ssl-unclean-shutdown \
- downgrade-1.0 force-response-1.0
-
-# Per-Server Logging:
-# The home of a custom SSL log file. Use this when you want a
-# compact non-error SSL logfile on a virtual host basis.
-CustomLog |/usr/bin/cat \
- "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
-
-</VirtualHost>
-
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/userdir.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.d/userdir.conf
deleted file mode 100644
index b5d7a49..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/userdir.conf
+++ /dev/null
@@ -1,36 +0,0 @@
-#
-# UserDir: The name of the directory that is appended onto a user's home
-# directory if a ~user request is received.
-#
-# The path to the end user account 'public_html' directory must be
-# accessible to the webserver userid. This usually means that ~userid
-# must have permissions of 711, ~userid/public_html must have permissions
-# of 755, and documents contained therein must be world-readable.
-# Otherwise, the client will only receive a "403 Forbidden" message.
-#
-<IfModule mod_userdir.c>
- #
- # UserDir is disabled by default since it can confirm the presence
- # of a username on the system (depending on home directory
- # permissions).
- #
- UserDir disabled
-
- #
- # To enable requests to /~user/ to serve the user's public_html
- # directory, remove the "UserDir disabled" line above, and uncomment
- # the following line instead:
- #
- #UserDir public_html
-</IfModule>
-
-#
-# Control access to UserDir directories. The following is an example
-# for a site where these directories are restricted to read-only.
-#
-<Directory "/home/*/public_html">
- AllowOverride FileInfo AuthConfig Limit Indexes
- Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
- Require method GET POST OPTIONS
-</Directory>
-
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/welcome.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.d/welcome.conf
deleted file mode 100644
index 34b4b72..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/welcome.conf
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# This configuration file enables the default "Welcome" page if there
-# is no default index page present for the root URL. To disable the
-# Welcome page, comment out all the lines below.
-#
-# NOTE: if this file is removed, it will be restored on upgrades.
-#
-<LocationMatch "^/+$">
- Options -Indexes
- ErrorDocument 403 /.noindex.html
-</LocationMatch>
-
-<Directory /opt/rh/httpd24/root/usr/share/httpd/noindex>
- AllowOverride None
- Require all granted
-</Directory>
-
-Alias /.noindex.html /opt/rh/httpd24/root/usr/share/httpd/noindex/index.html
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-base.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-base.conf
deleted file mode 100644
index c109de6..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-base.conf
+++ /dev/null
@@ -1,67 +0,0 @@
-#
-# This file loads most of the modules included with the Apache HTTP
-# Server itself.
-#
-
-LoadModule access_compat_module modules/mod_access_compat.so
-LoadModule actions_module modules/mod_actions.so
-LoadModule alias_module modules/mod_alias.so
-LoadModule allowmethods_module modules/mod_allowmethods.so
-LoadModule auth_basic_module modules/mod_auth_basic.so
-LoadModule auth_digest_module modules/mod_auth_digest.so
-LoadModule authn_anon_module modules/mod_authn_anon.so
-LoadModule authn_core_module modules/mod_authn_core.so
-LoadModule authn_dbd_module modules/mod_authn_dbd.so
-LoadModule authn_dbm_module modules/mod_authn_dbm.so
-LoadModule authn_file_module modules/mod_authn_file.so
-LoadModule authn_socache_module modules/mod_authn_socache.so
-LoadModule authz_core_module modules/mod_authz_core.so
-LoadModule authz_dbd_module modules/mod_authz_dbd.so
-LoadModule authz_dbm_module modules/mod_authz_dbm.so
-LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
-LoadModule authz_host_module modules/mod_authz_host.so
-LoadModule authz_owner_module modules/mod_authz_owner.so
-LoadModule authz_user_module modules/mod_authz_user.so
-LoadModule autoindex_module modules/mod_autoindex.so
-LoadModule cache_module modules/mod_cache.so
-LoadModule cache_disk_module modules/mod_cache_disk.so
-LoadModule cache_socache_module modules/mod_cache_socache.so
-LoadModule data_module modules/mod_data.so
-LoadModule dbd_module modules/mod_dbd.so
-LoadModule deflate_module modules/mod_deflate.so
-LoadModule dir_module modules/mod_dir.so
-LoadModule dumpio_module modules/mod_dumpio.so
-LoadModule echo_module modules/mod_echo.so
-LoadModule env_module modules/mod_env.so
-LoadModule expires_module modules/mod_expires.so
-LoadModule ext_filter_module modules/mod_ext_filter.so
-LoadModule filter_module modules/mod_filter.so
-LoadModule headers_module modules/mod_headers.so
-LoadModule http2_module modules/mod_http2.so
-LoadModule include_module modules/mod_include.so
-LoadModule info_module modules/mod_info.so
-LoadModule log_config_module modules/mod_log_config.so
-LoadModule logio_module modules/mod_logio.so
-LoadModule macro_module modules/mod_macro.so
-LoadModule mime_magic_module modules/mod_mime_magic.so
-LoadModule mime_module modules/mod_mime.so
-LoadModule negotiation_module modules/mod_negotiation.so
-LoadModule remoteip_module modules/mod_remoteip.so
-LoadModule reqtimeout_module modules/mod_reqtimeout.so
-LoadModule request_module modules/mod_request.so
-LoadModule rewrite_module modules/mod_rewrite.so
-LoadModule setenvif_module modules/mod_setenvif.so
-LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
-LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
-LoadModule socache_dbm_module modules/mod_socache_dbm.so
-LoadModule socache_memcache_module modules/mod_socache_memcache.so
-LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
-LoadModule status_module modules/mod_status.so
-LoadModule substitute_module modules/mod_substitute.so
-LoadModule suexec_module modules/mod_suexec.so
-LoadModule unique_id_module modules/mod_unique_id.so
-LoadModule unixd_module modules/mod_unixd.so
-LoadModule userdir_module modules/mod_userdir.so
-LoadModule version_module modules/mod_version.so
-LoadModule vhost_alias_module modules/mod_vhost_alias.so
-
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-dav.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-dav.conf
deleted file mode 100644
index e6af8de..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-dav.conf
+++ /dev/null
@@ -1,3 +0,0 @@
-LoadModule dav_module modules/mod_dav.so
-LoadModule dav_fs_module modules/mod_dav_fs.so
-LoadModule dav_lock_module modules/mod_dav_lock.so
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-lua.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-lua.conf
deleted file mode 100644
index 9e0d0db..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-lua.conf
+++ /dev/null
@@ -1 +0,0 @@
-LoadModule lua_module modules/mod_lua.so
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-mpm.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-mpm.conf
deleted file mode 100644
index 7bfd1d4..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-mpm.conf
+++ /dev/null
@@ -1,19 +0,0 @@
-# Select the MPM module which should be used by uncommenting exactly
-# one of the following LoadModule lines:
-
-# prefork MPM: Implements a non-threaded, pre-forking web server
-# See: http://httpd.apache.org/docs/2.4/mod/prefork.html
-LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
-
-# worker MPM: Multi-Processing Module implementing a hybrid
-# multi-threaded multi-process web server
-# See: http://httpd.apache.org/docs/2.4/mod/worker.html
-#
-#LoadModule mpm_worker_module modules/mod_mpm_worker.so
-
-# event MPM: A variant of the worker MPM with the goal of consuming
-# threads only for connections with active processing
-# See: http://httpd.apache.org/docs/2.4/mod/event.html
-#
-#LoadModule mpm_event_module modules/mod_mpm_event.so
-
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-optional.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-optional.conf
deleted file mode 100644
index 70bda5e..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-optional.conf
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# This file lists modules included with the Apache HTTP Server
-# which are not enabled by default.
-#
-
-#LoadModule asis_module modules/mod_asis.so
-#LoadModule buffer_module modules/mod_buffer.so
-#LoadModule file_cache_module modules/mod_file_cache.so
-#LoadModule watchdog_module modules/mod_watchdog.so
-#LoadModule heartbeat_module modules/mod_heartbeat.so
-#LoadModule heartmonitor_module modules/mod_heartmonitor.so
-#LoadModule usertrack_module modules/mod_usertrack.so
-#LoadModule dialup_module modules/mod_dialup.so
-#LoadModule charset_lite_module modules/mod_charset_lite.so
-#LoadModule log_debug_module modules/mod_log_debug.so
-#LoadModule log_forensic_module modules/mod_log_forensic.so
-#LoadModule ratelimit_module modules/mod_ratelimit.so
-#LoadModule reflector_module modules/mod_reflector.so
-#LoadModule sed_module modules/mod_sed.so
-#LoadModule speling_module modules/mod_speling.so
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-proxy.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-proxy.conf
deleted file mode 100644
index cc0bca0..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-proxy.conf
+++ /dev/null
@@ -1,16 +0,0 @@
-# This file configures all the proxy modules:
-LoadModule proxy_module modules/mod_proxy.so
-LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
-LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
-LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
-LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
-LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
-LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
-LoadModule proxy_connect_module modules/mod_proxy_connect.so
-LoadModule proxy_express_module modules/mod_proxy_express.so
-LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
-LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
-LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
-LoadModule proxy_http_module modules/mod_proxy_http.so
-LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
-LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-ssl.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-ssl.conf
deleted file mode 100644
index 53235cd..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-ssl.conf
+++ /dev/null
@@ -1 +0,0 @@
-LoadModule ssl_module modules/mod_ssl.so
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-systemd.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-systemd.conf
deleted file mode 100644
index b208c97..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-systemd.conf
+++ /dev/null
@@ -1,2 +0,0 @@
-# This file configures systemd module:
-LoadModule systemd_module modules/mod_systemd.so
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/01-cgi.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/01-cgi.conf
deleted file mode 100644
index 5b8b936..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/01-cgi.conf
+++ /dev/null
@@ -1,14 +0,0 @@
-# This configuration file loads a CGI module appropriate to the MPM
-# which has been configured in 00-mpm.conf. mod_cgid should be used
-# with a threaded MPM; mod_cgi with the prefork MPM.
-
-<IfModule mpm_worker_module>
- LoadModule cgid_module modules/mod_cgid.so
-</IfModule>
-<IfModule mpm_event_module>
- LoadModule cgid_module modules/mod_cgid.so
-</IfModule>
-<IfModule mpm_prefork_module>
- LoadModule cgi_module modules/mod_cgi.so
-</IfModule>
-
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf/httpd.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf/httpd.conf
deleted file mode 100644
index 88fcb97..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf/httpd.conf
+++ /dev/null
@@ -1,353 +0,0 @@
-#
-# This is the main Apache HTTP server configuration file. It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
-# In particular, see
-# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
-# for a discussion of each configuration directive.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do. They're here only as hints or reminders. If you are unsure
-# consult the online docs. You have been warned.
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path. If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so 'log/access_log'
-# with ServerRoot set to '/www' will be interpreted by the
-# server as '/www/log/access_log', where as '/log/access_log' will be
-# interpreted as '/log/access_log'.
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# Do not add a slash at the end of the directory path. If you point
-# ServerRoot at a non-local disk, be sure to specify a local disk on the
-# Mutex directive, if file-based mutexes are used. If you wish to share the
-# same ServerRoot for multiple httpd daemons, you will need to change at
-# least PidFile.
-#
-ServerRoot "/opt/rh/httpd24/root/etc/httpd"
-
-#
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, instead of the default. See also the <VirtualHost>
-# directive.
-#
-# Change this to Listen on specific IP addresses as shown below to
-# prevent Apache from glomming onto all bound IP addresses.
-#
-#Listen 12.34.56.78:80
-Listen 0.0.0.0:8080
-
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Statically compiled modules (those listed by `httpd -l') do not need
-# to be loaded here.
-#
-# Example:
-# LoadModule foo_module modules/mod_foo.so
-#
-Include conf.modules.d/*.conf
-
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-# It is usually good practice to create a dedicated user and group for
-# running httpd, as with most system services.
-#
-User default
-Group root
-
-# 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition. These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed. This address appears on some server-generated pages, such
-# as error documents. e.g. admin@your-domain.com
-#
-ServerAdmin root@localhost
-
-#
-# ServerName gives the name and port that the server uses to identify itself.
-# This can often be determined automatically, but we recommend you specify
-# it explicitly to prevent problems during startup.
-#
-# If your host doesn't have a registered DNS name, enter its IP address here.
-#
-#ServerName www.example.com:80
-
-#
-# Deny access to the entirety of your server's filesystem. You must
-# explicitly permit access to web content directories in other
-# <Directory> blocks below.
-#
-<Directory />
- AllowOverride none
- Require all denied
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "/opt/rh/httpd24/root/var/www/html"
-
-#
-# Relax access to content within /opt/rh/httpd24/root/var/www.
-#
-<Directory "/opt/rh/httpd24/root/var/www">
- AllowOverride None
- # Allow open access:
- Require all granted
-</Directory>
-
-# Further relax access to the default document root:
-<Directory "/opt/rh/httpd24/root/var/www/html">
- #
- # Possible values for the Options directive are "None", "All",
- # or any combination of:
- # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
- #
- # Note that "MultiViews" must be named *explicitly* --- "Options All"
- # doesn't give it to you.
- #
- # The Options directive is both complicated and important. Please see
- # http://httpd.apache.org/docs/2.4/mod/core.html#options
- # for more information.
- #
- Options Indexes FollowSymLinks
-
- #
- # AllowOverride controls what directives may be placed in .htaccess files.
- # It can be "All", "None", or any combination of the keywords:
- # Options FileInfo AuthConfig Limit
- #
- AllowOverride All
-
- #
- # Controls who can get stuff from this server.
- #
- Require all granted
-</Directory>
-
-#
-# DirectoryIndex: sets the file that Apache will serve if a directory
-# is requested.
-#
-<IfModule dir_module>
- DirectoryIndex index.html
-</IfModule>
-
-#
-# The following lines prevent .htaccess and .htpasswd files from being
-# viewed by Web clients.
-#
-<Files ".ht*">
- Require all denied
-</Files>
-
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here. If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog |/usr/bin/cat
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-
-<IfModule log_config_module>
- #
- # The following directives define some format nicknames for use with
- # a CustomLog directive (see below).
- #
- LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
- LogFormat "%h %l %u %t \"%r\" %>s %b" common
-
- <IfModule logio_module>
- # You need to enable mod_logio.c to use %I and %O
- LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
- </IfModule>
-
- #
- # The location and format of the access logfile (Common Logfile Format).
- # If you do not define any access logfiles within a <VirtualHost>
- # container, they will be logged here. Contrariwise, if you *do*
- # define per-<VirtualHost> access logfiles, transactions will be
- # logged therein and *not* in this file.
- #
- #CustomLog "logs/access_log" common
-
- #
- # If you prefer a logfile with access, agent, and referer information
- # (Combined Logfile Format) you can use the following directive.
- #
- CustomLog |/usr/bin/cat combined
-</IfModule>
-
-<IfModule alias_module>
- #
- # Redirect: Allows you to tell clients about documents that used to
- # exist in your server's namespace, but do not anymore. The client
- # will make a new request for the document at its new location.
- # Example:
- # Redirect permanent /foo http://www.example.com/bar
-
- #
- # Alias: Maps web paths into filesystem paths and is used to
- # access content that does not live under the DocumentRoot.
- # Example:
- # Alias /webpath /full/filesystem/path
- #
- # If you include a trailing / on /webpath then the server will
- # require it to be present in the URL. You will also likely
- # need to provide a <Directory> section to allow access to
- # the filesystem path.
-
- #
- # ScriptAlias: This controls which directories contain server scripts.
- # ScriptAliases are essentially the same as Aliases, except that
- # documents in the target directory are treated as applications and
- # run by the server when requested rather than as documents sent to the
- # client. The same rules about trailing "/" apply to ScriptAlias
- # directives as to Alias.
- #
- ScriptAlias /cgi-bin/ "/opt/rh/httpd24/root/var/www/cgi-bin/"
-
-</IfModule>
-
-#
-# "/opt/rh/httpd24/root/var/www/cgi-bin" should be changed to whatever your ScriptAliased
-# CGI directory exists, if you have that configured.
-#
-<Directory "/opt/rh/httpd24/root/var/www/cgi-bin">
- AllowOverride None
- Options None
- Require all granted
-</Directory>
-
-<IfModule mime_module>
- #
- # TypesConfig points to the file containing the list of mappings from
- # filename extension to MIME-type.
- #
- TypesConfig /etc/mime.types
-
- #
- # AddType allows you to add to or override the MIME configuration
- # file specified in TypesConfig for specific file types.
- #
- #AddType application/x-gzip .tgz
- #
- # AddEncoding allows you to have certain browsers uncompress
- # information on the fly. Note: Not all browsers support this.
- #
- #AddEncoding x-compress .Z
- #AddEncoding x-gzip .gz .tgz
- #
- # If the AddEncoding directives above are commented-out, then you
- # probably should define those extensions to indicate media types:
- #
- AddType application/x-compress .Z
- AddType application/x-gzip .gz .tgz
-
- #
- # AddHandler allows you to map certain file extensions to "handlers":
- # actions unrelated to filetype. These can be either built into the server
- # or added with the Action directive (see below)
- #
- # To use CGI scripts outside of ScriptAliased directories:
- # (You will also need to add "ExecCGI" to the "Options" directive.)
- #
- #AddHandler cgi-script .cgi
-
- # For type maps (negotiated resources):
- #AddHandler type-map var
-
- #
- # Filters allow you to process content before it is sent to the client.
- #
- # To parse .shtml files for server-side includes (SSI):
- # (You will also need to add "Includes" to the "Options" directive.)
- #
- AddType text/html .shtml
- AddOutputFilter INCLUDES .shtml
-</IfModule>
-
-#
-# Specify a default charset for all content served; this enables
-# interpretation of all content as UTF-8 by default. To use the
-# default browser choice (ISO-8859-1), or to allow the META tags
-# in HTML content to override this choice, comment out this
-# directive:
-#
-AddDefaultCharset UTF-8
-
-<IfModule mime_magic_module>
- #
- # The mod_mime_magic module allows the server to use various hints from the
- # contents of the file itself to determine its type. The MIMEMagicFile
- # directive tells the module where the hint definitions are located.
- #
- MIMEMagicFile conf/magic
-</IfModule>
-
-#
-# Customizable error responses come in three flavors:
-# 1) plain text 2) local redirects 3) external redirects
-#
-# Some examples:
-#ErrorDocument 500 "The server made a boo boo."
-#ErrorDocument 404 /missing.html
-#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
-#ErrorDocument 402 http://www.example.com/subscription_info.html
-#
-
-#
-# EnableMMAP and EnableSendfile: On systems that support it,
-# memory-mapping or the sendfile syscall may be used to deliver
-# files. This usually improves server performance, but must
-# be turned off when serving from networked-mounted
-# filesystems or if support for these functions is otherwise
-# broken on your system.
-# Defaults if commented: EnableMMAP On, EnableSendfile Off
-#
-#EnableMMAP off
-EnableSendfile on
-
-# Supplemental configuration
-#
-# Load config files in the "/etc/httpd/conf.d" directory, if any.
-IncludeOptional conf.d/*.conf
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf/magic b/setup/projects/katrin/files/etc/apache2-kaas/conf/magic
deleted file mode 100644
index 7c56119..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/conf/magic
+++ /dev/null
@@ -1,385 +0,0 @@
-# Magic data for mod_mime_magic Apache module (originally for file(1) command)
-# The module is described in /manual/mod/mod_mime_magic.html
-#
-# The format is 4-5 columns:
-# Column #1: byte number to begin checking from, ">" indicates continuation
-# Column #2: type of data to match
-# Column #3: contents of data to match
-# Column #4: MIME type of result
-# Column #5: MIME encoding of result (optional)
-
-#------------------------------------------------------------------------------
-# Localstuff: file(1) magic for locally observed files
-# Add any locally observed files here.
-
-#------------------------------------------------------------------------------
-# end local stuff
-#------------------------------------------------------------------------------
-
-#------------------------------------------------------------------------------
-# Java
-
-0 short 0xcafe
->2 short 0xbabe application/java
-
-#------------------------------------------------------------------------------
-# audio: file(1) magic for sound formats
-#
-# from Jan Nicolai Langfeldt <janl@ifi.uio.no>,
-#
-
-# Sun/NeXT audio data
-0 string .snd
->12 belong 1 audio/basic
->12 belong 2 audio/basic
->12 belong 3 audio/basic
->12 belong 4 audio/basic
->12 belong 5 audio/basic
->12 belong 6 audio/basic
->12 belong 7 audio/basic
-
->12 belong 23 audio/x-adpcm
-
-# DEC systems (e.g. DECstation 5000) use a variant of the Sun/NeXT format
-# that uses little-endian encoding and has a different magic number
-# (0x0064732E in little-endian encoding).
-0 lelong 0x0064732E
->12 lelong 1 audio/x-dec-basic
->12 lelong 2 audio/x-dec-basic
->12 lelong 3 audio/x-dec-basic
->12 lelong 4 audio/x-dec-basic
->12 lelong 5 audio/x-dec-basic
->12 lelong 6 audio/x-dec-basic
->12 lelong 7 audio/x-dec-basic
-# compressed (G.721 ADPCM)
->12 lelong 23 audio/x-dec-adpcm
-
-# Bytes 0-3 of AIFF, AIFF-C, & 8SVX audio files are "FORM"
-# AIFF audio data
-8 string AIFF audio/x-aiff
-# AIFF-C audio data
-8 string AIFC audio/x-aiff
-# IFF/8SVX audio data
-8 string 8SVX audio/x-aiff
-
-# Creative Labs AUDIO stuff
-# Standard MIDI data
-0 string MThd audio/unknown
-#>9 byte >0 (format %d)
-#>11 byte >1 using %d channels
-# Creative Music (CMF) data
-0 string CTMF audio/unknown
-# SoundBlaster instrument data
-0 string SBI audio/unknown
-# Creative Labs voice data
-0 string Creative\ Voice\ File audio/unknown
-## is this next line right? it came this way...
-#>19 byte 0x1A
-#>23 byte >0 - version %d
-#>22 byte >0 \b.%d
-
-# [GRR 950115: is this also Creative Labs? Guessing that first line
-# should be string instead of unknown-endian long...]
-#0 long 0x4e54524b MultiTrack sound data
-#0 string NTRK MultiTrack sound data
-#>4 long x - version %ld
-
-# Microsoft WAVE format (*.wav)
-# [GRR 950115: probably all of the shorts and longs should be leshort/lelong]
-# Microsoft RIFF
-0 string RIFF audio/unknown
-# - WAVE format
->8 string WAVE audio/x-wav
-# MPEG audio.
-0 beshort&0xfff0 0xfff0 audio/mpeg
-# C64 SID Music files, from Linus Walleij <triad@df.lth.se>
-0 string PSID audio/prs.sid
-
-#------------------------------------------------------------------------------
-# c-lang: file(1) magic for C programs or various scripts
-#
-
-# XPM icons (Greg Roelofs, newt@uchicago.edu)
-# ideally should go into "images", but entries below would tag XPM as C source
-0 string /*\ XPM image/x-xbm 7bit
-
-# this first will upset you if you're a PL/1 shop... (are there any left?)
-# in which case rm it; ascmagic will catch real C programs
-# C or REXX program text
-0 string /* text/plain
-# C++ program text
-0 string // text/plain
-
-#------------------------------------------------------------------------------
-# compress: file(1) magic for pure-compression formats (no archives)
-#
-# compress, gzip, pack, compact, huf, squeeze, crunch, freeze, yabba, whap, etc.
-#
-# Formats for various forms of compressed data
-# Formats for "compress" proper have been moved into "compress.c",
-# because it tries to uncompress it to figure out what's inside.
-
-# standard unix compress
-0 string \037\235 application/octet-stream x-compress
-
-# gzip (GNU zip, not to be confused with [Info-ZIP/PKWARE] zip archiver)
-0 string \037\213 application/octet-stream x-gzip
-
-# According to gzip.h, this is the correct byte order for packed data.
-0 string \037\036 application/octet-stream
-#
-# This magic number is byte-order-independent.
-#
-0 short 017437 application/octet-stream
-
-# XXX - why *two* entries for "compacted data", one of which is
-# byte-order independent, and one of which is byte-order dependent?
-#
-# compacted data
-0 short 0x1fff application/octet-stream
-0 string \377\037 application/octet-stream
-# huf output
-0 short 0145405 application/octet-stream
-
-# Squeeze and Crunch...
-# These numbers were gleaned from the Unix versions of the programs to
-# handle these formats. Note that I can only uncrunch, not crunch, and
-# I didn't have a crunched file handy, so the crunch number is untested.
-# Keith Waclena <keith@cerberus.uchicago.edu>
-#0 leshort 0x76FF squeezed data (CP/M, DOS)
-#0 leshort 0x76FE crunched data (CP/M, DOS)
-
-# Freeze
-#0 string \037\237 Frozen file 2.1
-#0 string \037\236 Frozen file 1.0 (or gzip 0.5)
-
-# lzh?
-#0 string \037\240 LZH compressed data
-
-#------------------------------------------------------------------------------
-# frame: file(1) magic for FrameMaker files
-#
-# This stuff came on a FrameMaker demo tape, most of which is
-# copyright, but this file is "published" as witness the following:
-#
-0 string \<MakerFile application/x-frame
-0 string \<MIFFile application/x-frame
-0 string \<MakerDictionary application/x-frame
-0 string \<MakerScreenFon application/x-frame
-0 string \<MML application/x-frame
-0 string \<Book application/x-frame
-0 string \<Maker application/x-frame
-
-#------------------------------------------------------------------------------
-# html: file(1) magic for HTML (HyperText Markup Language) docs
-#
-# from Daniel Quinlan <quinlan@yggdrasil.com>
-# and Anna Shergold <anna@inext.co.uk>
-#
-0 string \<!DOCTYPE\ HTML text/html
-0 string \<!doctype\ html text/html
-0 string \<HEAD text/html
-0 string \<head text/html
-0 string \<TITLE text/html
-0 string \<title text/html
-0 string \<html text/html
-0 string \<HTML text/html
-0 string \<!-- text/html
-0 string \<h1 text/html
-0 string \<H1 text/html
-
-# XML eXtensible Markup Language, from Linus Walleij <triad@df.lth.se>
-0 string \<?xml text/xml
-
-#------------------------------------------------------------------------------
-# images: file(1) magic for image formats (see also "c-lang" for XPM bitmaps)
-#
-# originally from jef@helios.ee.lbl.gov (Jef Poskanzer),
-# additions by janl@ifi.uio.no as well as others. Jan also suggested
-# merging several one- and two-line files into here.
-#
-# XXX - byte order for GIF and TIFF fields?
-# [GRR: TIFF allows both byte orders; GIF is probably little-endian]
-#
-
-# [GRR: what the hell is this doing in here?]
-#0 string xbtoa btoa'd file
-
-# PBMPLUS
-# PBM file
-0 string P1 image/x-portable-bitmap 7bit
-# PGM file
-0 string P2 image/x-portable-greymap 7bit
-# PPM file
-0 string P3 image/x-portable-pixmap 7bit
-# PBM "rawbits" file
-0 string P4 image/x-portable-bitmap
-# PGM "rawbits" file
-0 string P5 image/x-portable-greymap
-# PPM "rawbits" file
-0 string P6 image/x-portable-pixmap
-
-# NIFF (Navy Interchange File Format, a modification of TIFF)
-# [GRR: this *must* go before TIFF]
-0 string IIN1 image/x-niff
-
-# TIFF and friends
-# TIFF file, big-endian
-0 string MM image/tiff
-# TIFF file, little-endian
-0 string II image/tiff
-
-# possible GIF replacements; none yet released!
-# (Greg Roelofs, newt@uchicago.edu)
-#
-# GRR 950115: this was mine ("Zip GIF"):
-# ZIF image (GIF+deflate alpha)
-0 string GIF94z image/unknown
-#
-# GRR 950115: this is Jeremy Wohl's Free Graphics Format (better):
-# FGF image (GIF+deflate beta)
-0 string FGF95a image/unknown
-#
-# GRR 950115: this is Thomas Boutell's Portable Bitmap Format proposal
-# (best; not yet implemented):
-# PBF image (deflate compression)
-0 string PBF image/unknown
-
-# GIF
-0 string GIF image/gif
-
-# JPEG images
-0 beshort 0xffd8 image/jpeg
-
-# PC bitmaps (OS/2, Windoze BMP files) (Greg Roelofs, newt@uchicago.edu)
-0 string BM image/bmp
-#>14 byte 12 (OS/2 1.x format)
-#>14 byte 64 (OS/2 2.x format)
-#>14 byte 40 (Windows 3.x format)
-#0 string IC icon
-#0 string PI pointer
-#0 string CI color icon
-#0 string CP color pointer
-#0 string BA bitmap array
-
-0 string \x89PNG image/png
-0 string FWS application/x-shockwave-flash
-0 string CWS application/x-shockwave-flash
-
-#------------------------------------------------------------------------------
-# lisp: file(1) magic for lisp programs
-#
-# various lisp types, from Daniel Quinlan (quinlan@yggdrasil.com)
-0 string ;; text/plain 8bit
-# Emacs 18 - this is always correct, but not very magical.
-0 string \012( application/x-elc
-# Emacs 19
-0 string ;ELC\023\000\000\000 application/x-elc
-
-#------------------------------------------------------------------------------
-# mail.news: file(1) magic for mail and news
-#
-# There are tests to ascmagic.c to cope with mail and news.
-0 string Relay-Version: message/rfc822 7bit
-0 string #!\ rnews message/rfc822 7bit
-0 string N#!\ rnews message/rfc822 7bit
-0 string Forward\ to message/rfc822 7bit
-0 string Pipe\ to message/rfc822 7bit
-0 string Return-Path: message/rfc822 7bit
-0 string Path: message/news 8bit
-0 string Xref: message/news 8bit
-0 string From: message/rfc822 7bit
-0 string Article message/news 8bit
-#------------------------------------------------------------------------------
-# msword: file(1) magic for MS Word files
-#
-# Contributor claims:
-# Reversed-engineered MS Word magic numbers
-#
-
-0 string \376\067\0\043 application/msword
-0 string \333\245-\0\0\0 application/msword
-
-# disable this one because it applies also to other
-# Office/OLE documents for which msword is not correct. See PR#2608.
-#0 string \320\317\021\340\241\261 application/msword
-
-
-
-#------------------------------------------------------------------------------
-# printer: file(1) magic for printer-formatted files
-#
-
-# PostScript
-0 string %! application/postscript
-0 string \004%! application/postscript
-
-# Acrobat
-# (due to clamen@cs.cmu.edu)
-0 string %PDF- application/pdf
-
-#------------------------------------------------------------------------------
-# sc: file(1) magic for "sc" spreadsheet
-#
-38 string Spreadsheet application/x-sc
-
-#------------------------------------------------------------------------------
-# tex: file(1) magic for TeX files
-#
-# XXX - needs byte-endian stuff (big-endian and little-endian DVI?)
-#
-# From <conklin@talisman.kaleida.com>
-
-# Although we may know the offset of certain text fields in TeX DVI
-# and font files, we can't use them reliably because they are not
-# zero terminated. [but we do anyway, christos]
-0 string \367\002 application/x-dvi
-#0 string \367\203 TeX generic font data
-#0 string \367\131 TeX packed font data
-#0 string \367\312 TeX virtual font data
-#0 string This\ is\ TeX, TeX transcript text
-#0 string This\ is\ METAFONT, METAFONT transcript text
-
-# There is no way to detect TeX Font Metric (*.tfm) files without
-# breaking them apart and reading the data. The following patterns
-# match most *.tfm files generated by METAFONT or afm2tfm.
-#2 string \000\021 TeX font metric data
-#2 string \000\022 TeX font metric data
-#>34 string >\0 (%s)
-
-# Texinfo and GNU Info, from Daniel Quinlan (quinlan@yggdrasil.com)
-#0 string \\input\ texinfo Texinfo source text
-#0 string This\ is\ Info\ file GNU Info text
-
-# correct TeX magic for Linux (and maybe more)
-# from Peter Tobias (tobias@server.et-inf.fho-emden.de)
-#
-0 leshort 0x02f7 application/x-dvi
-
-# RTF - Rich Text Format
-0 string {\\rtf application/rtf
-
-#------------------------------------------------------------------------------
-# animation: file(1) magic for animation/movie formats
-#
-# animation formats, originally from vax@ccwf.cc.utexas.edu (VaX#n8)
-# MPEG file
-0 string \000\000\001\263 video/mpeg
-#
-# The contributor claims:
-# I couldn't find a real magic number for these, however, this
-# -appears- to work. Note that it might catch other files, too,
-# so BE CAREFUL!
-#
-# Note that title and author appear in the two 20-byte chunks
-# at decimal offsets 2 and 22, respectively, but they are XOR'ed with
-# 255 (hex FF)! DL format SUCKS BIG ROCKS.
-#
-# DL file version 1 , medium format (160x100, 4 images/screen)
-0 byte 1 video/unknown
-0 byte 2 video/unknown
-# Quicktime video, from Linus Walleij <triad@df.lth.se>
-# from Apple quicktime file format documentation.
-4 string moov video/quicktime
-4 string mdat video/quicktime
-
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/logs b/setup/projects/katrin/files/etc/apache2-kaas/logs
deleted file mode 120000
index 2a478fd..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/logs
+++ /dev/null
@@ -1 +0,0 @@
-/var/log/httpd24 \ No newline at end of file
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/modules b/setup/projects/katrin/files/etc/apache2-kaas/modules
deleted file mode 120000
index a4c456b..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/modules
+++ /dev/null
@@ -1 +0,0 @@
-/opt/rh/httpd24/root/usr/lib64/httpd/modules \ No newline at end of file
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/run b/setup/projects/katrin/files/etc/apache2-kaas/run
deleted file mode 120000
index c1a28cf..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas/run
+++ /dev/null
@@ -1 +0,0 @@
-/opt/rh/httpd24/root/var/run/httpd \ No newline at end of file