summaryrefslogtreecommitdiffstats
path: root/setup/projects/katrin/files/etc/apache2-kaas-docker/httpd.conf
diff options
context:
space:
mode:
Diffstat (limited to 'setup/projects/katrin/files/etc/apache2-kaas-docker/httpd.conf')
-rw-r--r--setup/projects/katrin/files/etc/apache2-kaas-docker/httpd.conf496
1 files changed, 0 insertions, 496 deletions
diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/httpd.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/httpd.conf
deleted file mode 100644
index 4b05e71..0000000
--- a/setup/projects/katrin/files/etc/apache2-kaas-docker/httpd.conf
+++ /dev/null
@@ -1,496 +0,0 @@
-#
-# This is the main Apache HTTP server configuration file. It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
-# In particular, see
-# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
-# for a discussion of each configuration directive.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do. They're here only as hints or reminders. If you are unsure
-# consult the online docs. You have been warned.
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path. If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so 'log/access_log'
-# with ServerRoot set to '/www' will be interpreted by the
-# server as '/www/log/access_log', where as '/log/access_log' will be
-# interpreted as '/log/access_log'.
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# Do not add a slash at the end of the directory path. If you point
-# ServerRoot at a non-local disk, be sure to point the LockFile directive
-# at a local disk. If you wish to share the same ServerRoot for multiple
-# httpd daemons, you will need to change at least LockFile and PidFile.
-#
-ServerRoot "/usr/local/apache2"
-
-#
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, instead of the default. See also the <VirtualHost>
-# directive.
-#
-# Change this to Listen on specific IP addresses as shown below to
-# prevent Apache from glomming onto all bound IP addresses.
-#
-#Listen 12.34.56.78:80
-Listen 8080
-
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Statically compiled modules (those listed by `httpd -l') do not need
-# to be loaded here.
-#
-# Example:
-# LoadModule foo_module modules/mod_foo.so
-#
-LoadModule authn_file_module modules/mod_authn_file.so
-LoadModule authn_dbm_module modules/mod_authn_dbm.so
-LoadModule authn_anon_module modules/mod_authn_anon.so
-LoadModule authn_dbd_module modules/mod_authn_dbd.so
-LoadModule authn_default_module modules/mod_authn_default.so
-LoadModule authn_alias_module modules/mod_authn_alias.so
-LoadModule authz_host_module modules/mod_authz_host.so
-LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
-LoadModule authz_user_module modules/mod_authz_user.so
-LoadModule authz_dbm_module modules/mod_authz_dbm.so
-LoadModule authz_owner_module modules/mod_authz_owner.so
-LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
-LoadModule authz_default_module modules/mod_authz_default.so
-LoadModule auth_basic_module modules/mod_auth_basic.so
-LoadModule auth_digest_module modules/mod_auth_digest.so
-LoadModule file_cache_module modules/mod_file_cache.so
-LoadModule cache_module modules/mod_cache.so
-LoadModule disk_cache_module modules/mod_disk_cache.so
-LoadModule mem_cache_module modules/mod_mem_cache.so
-LoadModule dbd_module modules/mod_dbd.so
-LoadModule dumpio_module modules/mod_dumpio.so
-LoadModule reqtimeout_module modules/mod_reqtimeout.so
-LoadModule ext_filter_module modules/mod_ext_filter.so
-LoadModule include_module modules/mod_include.so
-LoadModule filter_module modules/mod_filter.so
-LoadModule substitute_module modules/mod_substitute.so
-LoadModule charset_lite_module modules/mod_charset_lite.so
-LoadModule deflate_module modules/mod_deflate.so
-LoadModule ldap_module modules/mod_ldap.so
-LoadModule log_config_module modules/mod_log_config.so
-LoadModule log_forensic_module modules/mod_log_forensic.so
-LoadModule logio_module modules/mod_logio.so
-LoadModule env_module modules/mod_env.so
-LoadModule mime_magic_module modules/mod_mime_magic.so
-LoadModule cern_meta_module modules/mod_cern_meta.so
-LoadModule expires_module modules/mod_expires.so
-LoadModule headers_module modules/mod_headers.so
-LoadModule ident_module modules/mod_ident.so
-LoadModule usertrack_module modules/mod_usertrack.so
-LoadModule unique_id_module modules/mod_unique_id.so
-LoadModule setenvif_module modules/mod_setenvif.so
-LoadModule version_module modules/mod_version.so
-LoadModule proxy_module modules/mod_proxy.so
-LoadModule proxy_connect_module modules/mod_proxy_connect.so
-LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
-LoadModule proxy_http_module modules/mod_proxy_http.so
-LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
-LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
-LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
-LoadModule ssl_module modules/mod_ssl.so
-LoadModule mime_module modules/mod_mime.so
-LoadModule dav_module modules/mod_dav.so
-LoadModule status_module modules/mod_status.so
-LoadModule autoindex_module modules/mod_autoindex.so
-LoadModule asis_module modules/mod_asis.so
-LoadModule info_module modules/mod_info.so
-LoadModule cgi_module modules/mod_cgi.so
-LoadModule dav_fs_module modules/mod_dav_fs.so
-LoadModule dav_lock_module modules/mod_dav_lock.so
-LoadModule vhost_alias_module modules/mod_vhost_alias.so
-LoadModule negotiation_module modules/mod_negotiation.so
-LoadModule dir_module modules/mod_dir.so
-LoadModule imagemap_module modules/mod_imagemap.so
-LoadModule actions_module modules/mod_actions.so
-LoadModule speling_module modules/mod_speling.so
-LoadModule userdir_module modules/mod_userdir.so
-LoadModule alias_module modules/mod_alias.so
-LoadModule rewrite_module modules/mod_rewrite.so
-
-<IfModule !mpm_netware_module>
-<IfModule !mpm_winnt_module>
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-# It is usually good practice to create a dedicated user and group for
-# running httpd, as with most system services.
-#
-User daemon
-Group daemon
-
-</IfModule>
-</IfModule>
-
-# 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition. These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed. This address appears on some server-generated pages, such
-# as error documents. e.g. admin@your-domain.com
-#
-ServerAdmin you@example.com
-
-#
-# ServerName gives the name and port that the server uses to identify itself.
-# This can often be determined automatically, but we recommend you specify
-# it explicitly to prevent problems during startup.
-#
-# If your host doesn't have a registered DNS name, enter its IP address here.
-#
-#ServerName www.example.com:80
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "/usr/local/apache2/htdocs"
-
-#
-# Each directory to which Apache has access can be configured with respect
-# to which services and features are allowed and/or disabled in that
-# directory (and its subdirectories).
-#
-# First, we configure the "default" to be a very restrictive set of
-# features.
-#
-<Directory />
- Options FollowSymLinks
- AllowOverride None
- Order deny,allow
- Deny from all
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# This should be changed to whatever you set DocumentRoot to.
-#
-<Directory "/usr/local/apache2/htdocs">
- #
- # Possible values for the Options directive are "None", "All",
- # or any combination of:
- # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
- #
- # Note that "MultiViews" must be named *explicitly* --- "Options All"
- # doesn't give it to you.
- #
- # The Options directive is both complicated and important. Please see
- # http://httpd.apache.org/docs/2.2/mod/core.html#options
- # for more information.
- #
- Options Indexes FollowSymLinks
-
- #
- # AllowOverride controls what directives may be placed in .htaccess files.
- # It can be "All", "None", or any combination of the keywords:
- # Options FileInfo AuthConfig Limit
- #
- AllowOverride None
-
- #
- # Controls who can get stuff from this server.
- #
- Order allow,deny
- Allow from all
-
-</Directory>
-
-#
-# DirectoryIndex: sets the file that Apache will serve if a directory
-# is requested.
-#
-<IfModule dir_module>
- DirectoryIndex index.html
-</IfModule>
-
-#
-# The following lines prevent .htaccess and .htpasswd files from being
-# viewed by Web clients.
-#
-<FilesMatch "^\.ht">
- Order allow,deny
- Deny from all
- Satisfy All
-</FilesMatch>
-
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here. If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog /proc/self/fd/2
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-
-<IfModule log_config_module>
- #
- # The following directives define some format nicknames for use with
- # a CustomLog directive (see below).
- #
- LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
- LogFormat "%h %l %u %t \"%r\" %>s %b" common
-
- <IfModule logio_module>
- # You need to enable mod_logio.c to use %I and %O
- LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
- </IfModule>
-
- #
- # The location and format of the access logfile (Common Logfile Format).
- # If you do not define any access logfiles within a <VirtualHost>
- # container, they will be logged here. Contrariwise, if you *do*
- # define per-<VirtualHost> access logfiles, transactions will be
- # logged therein and *not* in this file.
- #
- CustomLog /proc/self/fd/1 common
-
- #
- # If you prefer a logfile with access, agent, and referer information
- # (Combined Logfile Format) you can use the following directive.
- #
- #CustomLog "logs/access_log" combined
-</IfModule>
-
-<IfModule alias_module>
- #
- # Redirect: Allows you to tell clients about documents that used to
- # exist in your server's namespace, but do not anymore. The client
- # will make a new request for the document at its new location.
- # Example:
- # Redirect permanent /foo http://www.example.com/bar
-
- #
- # Alias: Maps web paths into filesystem paths and is used to
- # access content that does not live under the DocumentRoot.
- # Example:
- # Alias /webpath /full/filesystem/path
- #
- # If you include a trailing / on /webpath then the server will
- # require it to be present in the URL. You will also likely
- # need to provide a <Directory> section to allow access to
- # the filesystem path.
-
- #
- # ScriptAlias: This controls which directories contain server scripts.
- # ScriptAliases are essentially the same as Aliases, except that
- # documents in the target directory are treated as applications and
- # run by the server when requested rather than as documents sent to the
- # client. The same rules about trailing "/" apply to ScriptAlias
- # directives as to Alias.
- #
- ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/"
-
-</IfModule>
-
-<IfModule cgid_module>
- #
- # ScriptSock: On threaded servers, designate the path to the UNIX
- # socket used to communicate with the CGI daemon of mod_cgid.
- #
- #Scriptsock logs/cgisock
-</IfModule>
-
-#
-# "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased
-# CGI directory exists, if you have that configured.
-#
-<Directory "/usr/local/apache2/cgi-bin">
- AllowOverride None
- Options None
- Order allow,deny
- Allow from all
-</Directory>
-
-#
-# DefaultType: the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value. If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-#
-DefaultType text/plain
-
-<IfModule headers_module>
- #
- # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
- # backend servers which have lingering "httpoxy" defects.
- # 'Proxy' request header is undefined by the IETF, not listed by IANA
- #
- RequestHeader unset Proxy early
-</IfModule>
-
-<IfModule mime_module>
- #
- # TypesConfig points to the file containing the list of mappings from
- # filename extension to MIME-type.
- #
- TypesConfig conf/mime.types
-
- #
- # AddType allows you to add to or override the MIME configuration
- # file specified in TypesConfig for specific file types.
- #
- #AddType application/x-gzip .tgz
- #
- # AddEncoding allows you to have certain browsers uncompress
- # information on the fly. Note: Not all browsers support this.
- #
- #AddEncoding x-compress .Z
- #AddEncoding x-gzip .gz .tgz
- #
- # If the AddEncoding directives above are commented-out, then you
- # probably should define those extensions to indicate media types:
- #
- AddType application/x-compress .Z
- AddType application/x-gzip .gz .tgz
-
- #
- # AddHandler allows you to map certain file extensions to "handlers":
- # actions unrelated to filetype. These can be either built into the server
- # or added with the Action directive (see below)
- #
- # To use CGI scripts outside of ScriptAliased directories:
- # (You will also need to add "ExecCGI" to the "Options" directive.)
- #
- #AddHandler cgi-script .cgi
-
- # For type maps (negotiated resources):
- #AddHandler type-map var
-
- #
- # Filters allow you to process content before it is sent to the client.
- #
- # To parse .shtml files for server-side includes (SSI):
- # (You will also need to add "Includes" to the "Options" directive.)
- #
- #AddType text/html .shtml
- #AddOutputFilter INCLUDES .shtml
-</IfModule>
-
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type. The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-#
-#MIMEMagicFile conf/magic
-
-#
-# Customizable error responses come in three flavors:
-# 1) plain text 2) local redirects 3) external redirects
-#
-# Some examples:
-#ErrorDocument 500 "The server made a boo boo."
-#ErrorDocument 404 /missing.html
-#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
-#ErrorDocument 402 http://www.example.com/subscription_info.html
-#
-
-#
-# MaxRanges: Maximum number of Ranges in a request before
-# returning the entire resource, or one of the special
-# values 'default', 'none' or 'unlimited'.
-# Default setting is to accept 200 Ranges.
-#MaxRanges unlimited
-
-#
-# EnableMMAP and EnableSendfile: On systems that support it,
-# memory-mapping or the sendfile syscall is used to deliver
-# files. This usually improves server performance, but must
-# be turned off when serving from networked-mounted
-# filesystems or if support for these functions is otherwise
-# broken on your system.
-#
-#EnableMMAP off
-#EnableSendfile off
-
-# Supplemental configuration
-#
-# The configuration files in the conf/extra/ directory can be
-# included to add extra features or to modify the default configuration of
-# the server, or you may simply copy their contents here and change as
-# necessary.
-
-# Server-pool management (MPM specific)
-#Include conf/extra/httpd-mpm.conf
-
-# Multi-language error messages
-#Include conf/extra/httpd-multilang-errordoc.conf
-
-# Fancy directory listings
-#Include conf/extra/httpd-autoindex.conf
-
-# Language settings
-#Include conf/extra/httpd-languages.conf
-
-# User home directories
-#Include conf/extra/httpd-userdir.conf
-
-# Real-time info on requests and configuration
-#Include conf/extra/httpd-info.conf
-
-# Virtual hosts
-#Include conf/extra/httpd-vhosts.conf
-
-# Local access to the Apache HTTP Server Manual
-#Include conf/extra/httpd-manual.conf
-
-# Distributed authoring and versioning (WebDAV)
-#Include conf/extra/httpd-dav.conf
-
-# Various default settings
-#Include conf/extra/httpd-default.conf
-
-# Secure (SSL/TLS) connections
-#Include conf/extra/httpd-ssl.conf
-#
-# Note: The following must must be present to support
-# starting without SSL on platforms with no /dev/random equivalent
-# but a statically compiled-in mod_ssl.
-#
-<IfModule ssl_module>
-SSLRandomSeed startup builtin
-SSLRandomSeed connect builtin
-</IfModule>
-
-Include conf/kaas/router.conf