diff options
Diffstat (limited to 'setup/projects/kaas/files/etc/apache2/httpd.conf')
| -rw-r--r-- | setup/projects/kaas/files/etc/apache2/httpd.conf | 496 |
1 files changed, 496 insertions, 0 deletions
diff --git a/setup/projects/kaas/files/etc/apache2/httpd.conf b/setup/projects/kaas/files/etc/apache2/httpd.conf new file mode 100644 index 0000000..4b05e71 --- /dev/null +++ b/setup/projects/kaas/files/etc/apache2/httpd.conf @@ -0,0 +1,496 @@ +# +# This is the main Apache HTTP server configuration file. It contains the +# configuration directives that give the server its instructions. +# See <URL:http://httpd.apache.org/docs/2.2> for detailed information. +# In particular, see +# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> +# for a discussion of each configuration directive. +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32), the +# server will use that explicit path. If the filenames do *not* begin +# with "/", the value of ServerRoot is prepended -- so 'log/access_log' +# with ServerRoot set to '/www' will be interpreted by the +# server as '/www/log/access_log', where as '/log/access_log' will be +# interpreted as '/log/access_log'. + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# Do not add a slash at the end of the directory path. If you point +# ServerRoot at a non-local disk, be sure to point the LockFile directive +# at a local disk. If you wish to share the same ServerRoot for multiple +# httpd daemons, you will need to change at least LockFile and PidFile. +# +ServerRoot "/usr/local/apache2" + +# +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, instead of the default. See also the <VirtualHost> +# directive. +# +# Change this to Listen on specific IP addresses as shown below to +# prevent Apache from glomming onto all bound IP addresses. +# +#Listen 12.34.56.78:80 +Listen 8080 + +# +# Dynamic Shared Object (DSO) Support +# +# To be able to use the functionality of a module which was built as a DSO you +# have to place corresponding `LoadModule' lines at this location so the +# directives contained in it are actually available _before_ they are used. +# Statically compiled modules (those listed by `httpd -l') do not need +# to be loaded here. +# +# Example: +# LoadModule foo_module modules/mod_foo.so +# +LoadModule authn_file_module modules/mod_authn_file.so +LoadModule authn_dbm_module modules/mod_authn_dbm.so +LoadModule authn_anon_module modules/mod_authn_anon.so +LoadModule authn_dbd_module modules/mod_authn_dbd.so +LoadModule authn_default_module modules/mod_authn_default.so +LoadModule authn_alias_module modules/mod_authn_alias.so +LoadModule authz_host_module modules/mod_authz_host.so +LoadModule authz_groupfile_module modules/mod_authz_groupfile.so +LoadModule authz_user_module modules/mod_authz_user.so +LoadModule authz_dbm_module modules/mod_authz_dbm.so +LoadModule authz_owner_module modules/mod_authz_owner.so +LoadModule authnz_ldap_module modules/mod_authnz_ldap.so +LoadModule authz_default_module modules/mod_authz_default.so +LoadModule auth_basic_module modules/mod_auth_basic.so +LoadModule auth_digest_module modules/mod_auth_digest.so +LoadModule file_cache_module modules/mod_file_cache.so +LoadModule cache_module modules/mod_cache.so +LoadModule disk_cache_module modules/mod_disk_cache.so +LoadModule mem_cache_module modules/mod_mem_cache.so +LoadModule dbd_module modules/mod_dbd.so +LoadModule dumpio_module modules/mod_dumpio.so +LoadModule reqtimeout_module modules/mod_reqtimeout.so +LoadModule ext_filter_module modules/mod_ext_filter.so +LoadModule include_module modules/mod_include.so +LoadModule filter_module modules/mod_filter.so +LoadModule substitute_module modules/mod_substitute.so +LoadModule charset_lite_module modules/mod_charset_lite.so +LoadModule deflate_module modules/mod_deflate.so +LoadModule ldap_module modules/mod_ldap.so +LoadModule log_config_module modules/mod_log_config.so +LoadModule log_forensic_module modules/mod_log_forensic.so +LoadModule logio_module modules/mod_logio.so +LoadModule env_module modules/mod_env.so +LoadModule mime_magic_module modules/mod_mime_magic.so +LoadModule cern_meta_module modules/mod_cern_meta.so +LoadModule expires_module modules/mod_expires.so +LoadModule headers_module modules/mod_headers.so +LoadModule ident_module modules/mod_ident.so +LoadModule usertrack_module modules/mod_usertrack.so +LoadModule unique_id_module modules/mod_unique_id.so +LoadModule setenvif_module modules/mod_setenvif.so +LoadModule version_module modules/mod_version.so +LoadModule proxy_module modules/mod_proxy.so +LoadModule proxy_connect_module modules/mod_proxy_connect.so +LoadModule proxy_ftp_module modules/mod_proxy_ftp.so +LoadModule proxy_http_module modules/mod_proxy_http.so +LoadModule proxy_scgi_module modules/mod_proxy_scgi.so +LoadModule proxy_ajp_module modules/mod_proxy_ajp.so +LoadModule proxy_balancer_module modules/mod_proxy_balancer.so +LoadModule ssl_module modules/mod_ssl.so +LoadModule mime_module modules/mod_mime.so +LoadModule dav_module modules/mod_dav.so +LoadModule status_module modules/mod_status.so +LoadModule autoindex_module modules/mod_autoindex.so +LoadModule asis_module modules/mod_asis.so +LoadModule info_module modules/mod_info.so +LoadModule cgi_module modules/mod_cgi.so +LoadModule dav_fs_module modules/mod_dav_fs.so +LoadModule dav_lock_module modules/mod_dav_lock.so +LoadModule vhost_alias_module modules/mod_vhost_alias.so +LoadModule negotiation_module modules/mod_negotiation.so +LoadModule dir_module modules/mod_dir.so +LoadModule imagemap_module modules/mod_imagemap.so +LoadModule actions_module modules/mod_actions.so +LoadModule speling_module modules/mod_speling.so +LoadModule userdir_module modules/mod_userdir.so +LoadModule alias_module modules/mod_alias.so +LoadModule rewrite_module modules/mod_rewrite.so + +<IfModule !mpm_netware_module> +<IfModule !mpm_winnt_module> +# +# If you wish httpd to run as a different user or group, you must run +# httpd as root initially and it will switch. +# +# User/Group: The name (or #number) of the user/group to run httpd as. +# It is usually good practice to create a dedicated user and group for +# running httpd, as with most system services. +# +User daemon +Group daemon + +</IfModule> +</IfModule> + +# 'Main' server configuration +# +# The directives in this section set up the values used by the 'main' +# server, which responds to any requests that aren't handled by a +# <VirtualHost> definition. These values also provide defaults for +# any <VirtualHost> containers you may define later in the file. +# +# All of these directives may appear inside <VirtualHost> containers, +# in which case these default settings will be overridden for the +# virtual host being defined. +# + +# +# ServerAdmin: Your address, where problems with the server should be +# e-mailed. This address appears on some server-generated pages, such +# as error documents. e.g. admin@your-domain.com +# +ServerAdmin you@example.com + +# +# ServerName gives the name and port that the server uses to identify itself. +# This can often be determined automatically, but we recommend you specify +# it explicitly to prevent problems during startup. +# +# If your host doesn't have a registered DNS name, enter its IP address here. +# +#ServerName www.example.com:80 + +# +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. +# +DocumentRoot "/usr/local/apache2/htdocs" + +# +# Each directory to which Apache has access can be configured with respect +# to which services and features are allowed and/or disabled in that +# directory (and its subdirectories). +# +# First, we configure the "default" to be a very restrictive set of +# features. +# +<Directory /> + Options FollowSymLinks + AllowOverride None + Order deny,allow + Deny from all +</Directory> + +# +# Note that from this point forward you must specifically allow +# particular features to be enabled - so if something's not working as +# you might expect, make sure that you have specifically enabled it +# below. +# + +# +# This should be changed to whatever you set DocumentRoot to. +# +<Directory "/usr/local/apache2/htdocs"> + # + # Possible values for the Options directive are "None", "All", + # or any combination of: + # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews + # + # Note that "MultiViews" must be named *explicitly* --- "Options All" + # doesn't give it to you. + # + # The Options directive is both complicated and important. Please see + # http://httpd.apache.org/docs/2.2/mod/core.html#options + # for more information. + # + Options Indexes FollowSymLinks + + # + # AllowOverride controls what directives may be placed in .htaccess files. + # It can be "All", "None", or any combination of the keywords: + # Options FileInfo AuthConfig Limit + # + AllowOverride None + + # + # Controls who can get stuff from this server. + # + Order allow,deny + Allow from all + +</Directory> + +# +# DirectoryIndex: sets the file that Apache will serve if a directory +# is requested. +# +<IfModule dir_module> + DirectoryIndex index.html +</IfModule> + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# +<FilesMatch "^\.ht"> + Order allow,deny + Deny from all + Satisfy All +</FilesMatch> + +# +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a <VirtualHost> +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a <VirtualHost> +# container, that host's errors will be logged there and not here. +# +ErrorLog /proc/self/fd/2 + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + +<IfModule log_config_module> + # + # The following directives define some format nicknames for use with + # a CustomLog directive (see below). + # + LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined + LogFormat "%h %l %u %t \"%r\" %>s %b" common + + <IfModule logio_module> + # You need to enable mod_logio.c to use %I and %O + LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio + </IfModule> + + # + # The location and format of the access logfile (Common Logfile Format). + # If you do not define any access logfiles within a <VirtualHost> + # container, they will be logged here. Contrariwise, if you *do* + # define per-<VirtualHost> access logfiles, transactions will be + # logged therein and *not* in this file. + # + CustomLog /proc/self/fd/1 common + + # + # If you prefer a logfile with access, agent, and referer information + # (Combined Logfile Format) you can use the following directive. + # + #CustomLog "logs/access_log" combined +</IfModule> + +<IfModule alias_module> + # + # Redirect: Allows you to tell clients about documents that used to + # exist in your server's namespace, but do not anymore. The client + # will make a new request for the document at its new location. + # Example: + # Redirect permanent /foo http://www.example.com/bar + + # + # Alias: Maps web paths into filesystem paths and is used to + # access content that does not live under the DocumentRoot. + # Example: + # Alias /webpath /full/filesystem/path + # + # If you include a trailing / on /webpath then the server will + # require it to be present in the URL. You will also likely + # need to provide a <Directory> section to allow access to + # the filesystem path. + + # + # ScriptAlias: This controls which directories contain server scripts. + # ScriptAliases are essentially the same as Aliases, except that + # documents in the target directory are treated as applications and + # run by the server when requested rather than as documents sent to the + # client. The same rules about trailing "/" apply to ScriptAlias + # directives as to Alias. + # + ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/" + +</IfModule> + +<IfModule cgid_module> + # + # ScriptSock: On threaded servers, designate the path to the UNIX + # socket used to communicate with the CGI daemon of mod_cgid. + # + #Scriptsock logs/cgisock +</IfModule> + +# +# "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased +# CGI directory exists, if you have that configured. +# +<Directory "/usr/local/apache2/cgi-bin"> + AllowOverride None + Options None + Order allow,deny + Allow from all +</Directory> + +# +# DefaultType: the default MIME type the server will use for a document +# if it cannot otherwise determine one, such as from filename extensions. +# If your server contains mostly text or HTML documents, "text/plain" is +# a good value. If most of your content is binary, such as applications +# or images, you may want to use "application/octet-stream" instead to +# keep browsers from trying to display binary files as though they are +# text. +# +DefaultType text/plain + +<IfModule headers_module> + # + # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied + # backend servers which have lingering "httpoxy" defects. + # 'Proxy' request header is undefined by the IETF, not listed by IANA + # + RequestHeader unset Proxy early +</IfModule> + +<IfModule mime_module> + # + # TypesConfig points to the file containing the list of mappings from + # filename extension to MIME-type. + # + TypesConfig conf/mime.types + + # + # AddType allows you to add to or override the MIME configuration + # file specified in TypesConfig for specific file types. + # + #AddType application/x-gzip .tgz + # + # AddEncoding allows you to have certain browsers uncompress + # information on the fly. Note: Not all browsers support this. + # + #AddEncoding x-compress .Z + #AddEncoding x-gzip .gz .tgz + # + # If the AddEncoding directives above are commented-out, then you + # probably should define those extensions to indicate media types: + # + AddType application/x-compress .Z + AddType application/x-gzip .gz .tgz + + # + # AddHandler allows you to map certain file extensions to "handlers": + # actions unrelated to filetype. These can be either built into the server + # or added with the Action directive (see below) + # + # To use CGI scripts outside of ScriptAliased directories: + # (You will also need to add "ExecCGI" to the "Options" directive.) + # + #AddHandler cgi-script .cgi + + # For type maps (negotiated resources): + #AddHandler type-map var + + # + # Filters allow you to process content before it is sent to the client. + # + # To parse .shtml files for server-side includes (SSI): + # (You will also need to add "Includes" to the "Options" directive.) + # + #AddType text/html .shtml + #AddOutputFilter INCLUDES .shtml +</IfModule> + +# +# The mod_mime_magic module allows the server to use various hints from the +# contents of the file itself to determine its type. The MIMEMagicFile +# directive tells the module where the hint definitions are located. +# +#MIMEMagicFile conf/magic + +# +# Customizable error responses come in three flavors: +# 1) plain text 2) local redirects 3) external redirects +# +# Some examples: +#ErrorDocument 500 "The server made a boo boo." +#ErrorDocument 404 /missing.html +#ErrorDocument 404 "/cgi-bin/missing_handler.pl" +#ErrorDocument 402 http://www.example.com/subscription_info.html +# + +# +# MaxRanges: Maximum number of Ranges in a request before +# returning the entire resource, or one of the special +# values 'default', 'none' or 'unlimited'. +# Default setting is to accept 200 Ranges. +#MaxRanges unlimited + +# +# EnableMMAP and EnableSendfile: On systems that support it, +# memory-mapping or the sendfile syscall is used to deliver +# files. This usually improves server performance, but must +# be turned off when serving from networked-mounted +# filesystems or if support for these functions is otherwise +# broken on your system. +# +#EnableMMAP off +#EnableSendfile off + +# Supplemental configuration +# +# The configuration files in the conf/extra/ directory can be +# included to add extra features or to modify the default configuration of +# the server, or you may simply copy their contents here and change as +# necessary. + +# Server-pool management (MPM specific) +#Include conf/extra/httpd-mpm.conf + +# Multi-language error messages +#Include conf/extra/httpd-multilang-errordoc.conf + +# Fancy directory listings +#Include conf/extra/httpd-autoindex.conf + +# Language settings +#Include conf/extra/httpd-languages.conf + +# User home directories +#Include conf/extra/httpd-userdir.conf + +# Real-time info on requests and configuration +#Include conf/extra/httpd-info.conf + +# Virtual hosts +#Include conf/extra/httpd-vhosts.conf + +# Local access to the Apache HTTP Server Manual +#Include conf/extra/httpd-manual.conf + +# Distributed authoring and versioning (WebDAV) +#Include conf/extra/httpd-dav.conf + +# Various default settings +#Include conf/extra/httpd-default.conf + +# Secure (SSL/TLS) connections +#Include conf/extra/httpd-ssl.conf +# +# Note: The following must must be present to support +# starting without SSL on platforms with no /dev/random equivalent +# but a statically compiled-in mod_ssl. +# +<IfModule ssl_module> +SSLRandomSeed startup builtin +SSLRandomSeed connect builtin +</IfModule> + +Include conf/kaas/router.conf |