Changed build system to CMake

1 files changed, 0 insertions, 332 deletions

diff --git a/kiro-trb.h b/kiro-trb.h
deleted file mode 100644
index 5c2b462..0000000
--- a/kiro-trb.h
+++ /dev/null
@@ -1,332 +0,0 @@
-/* Copyright (C) 2014 Timo Dritschler <timo.dritschler@kit.edu>
-   (Karlsruhe Institute of Technology)
-
-   This library is free software; you can redistribute it and/or modify it
-   under the terms of the GNU Lesser General Public License as published by the
-   Free Software Foundation; either version 2.1 of the License, or (at your
-   option) any later version.
-
-   This library is distributed in the hope that it will be useful, but WITHOUT
-   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-   FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more
-   details.
-
-   You should have received a copy of the GNU Lesser General Public License along
-   with this library; if not, write to the Free Software Foundation, Inc., 51
-   Franklin St, Fifth Floor, Boston, MA 02110, USA
-*/
-
-/**
- * SECTION: kiro-trb
- * @Short_description: KIRO 'Transmittable Ring Buffer'
- * @Title: KiroTrb
- *
- * KiroTrb implements a 'Transmittable Ring Buffer' that holds all necessary information
- * about its content inside itself, so its data can be exchanged between different
- * instances of the KiroTrb Class and/or sent over a network.
- */
- 
-#ifndef __KIRO_TRB_H
-#define __KIRO_TBR_H
-
-#include <stdint.h>
-#include <glib-object.h>
-
-G_BEGIN_DECLS
-
-#define KIRO_TYPE_TRB             (kiro_trb_get_type())
-#define KIRO_TRB(obj)             (G_TYPE_CHECK_INSTANCE_CAST((obj), KIRO_TYPE_TRB, KiroTrb))
-#define KIRO_IS_TRB(obj)          (G_TYPE_CHECK_INSTANCE_TYPE((obj), KIRO_TYPE_TRB))
-#define KIRO_TRB_CLASS(klass)     (G_TYPE_CHECK_CLASS_CAST((klass), KIRO_TYPE_TRB, KiroTrbClass))
-#define KIRO_IS_TRB_CLASS(klass)  (G_TYPE_CHECK_CLASS_TYPE((klass), KIRO_TYPE_TRB))
-#define KIRO_TRB_GET_CLASS(obj)   (G_TYPE_INSTANCE_GET_CLASS((obj), KIRO_TYPE_TRB, KiroTrbClass))
-
-
-typedef struct _KiroTrb           KiroTrb;
-typedef struct _KiroTrbClass      KiroTrbClass;
-typedef struct _KiroTrbPrivate    KiroTrbPrivate;
-
-
-struct _KiroTrb {
-    
-    GObject parent;
-
-};
-
-
-/**
- * IbvConnectorInterface:
- *
- * Base interface for IbvConnectors.
- */
-
-struct _KiroTrbClass {
-    
-    GObjectClass parent_class;
-       
-};
-
-
-struct KiroTrbInfo {
-    
-    /* internal information about the buffer */
-    uint64_t buffer_size_bytes;  // Size in bytes INCLUDING this header
-    uint64_t element_size;       // Size in bytes of one single element
-    uint64_t offset;             // Current Offset to access the 'oldest' element (in element count!)
-    
-} __attribute__((packed));
-
-
-/* GObject and GType functions */
-GType       kiro_trb_get_type           (void);
-
-GObject     kiro_trb_new                (void);
-
-
-/* trb functions */
-
-/**
- * kiro_trb_get_element_size - Returns the element size in bytes
- * @trb: KIRO TRB to perform the operation on
- * Description:
- *   Returns the size of the individual elements in the buffer
- * See also:
- *   kiro_trb_reshape, kiro_trb_adopt, kiro_trb_clone
- */
-uint64_t kiro_trb_get_element_size (KiroTrb* trb);
-
-/**
- * kiro_trb_get_max_elements - Returns the capacity of the buffer
- * @trb: KIRO TRB to perform the operation on
- * Description:
- *   Returns the mximal number of elements that can be stored in
- *   the buffer
- * See also:
- *   kiro_trb_get_element_size, kiro_trb_reshape, kiro_trb_adopt,
- *   kiro_trb_clone
- */
-uint64_t kiro_trb_get_max_elements (KiroTrb* trb);
-
-
-/**
- * kiro_trb_get_raw_size - Returns the size of the buffer memory
- * @trb: KIRO TRB to perform the operation on
- * Description:
- *   Returns the size of the buffers internal memory
- * Notes:
- *   The returned size is given INCLUDING the header on top of the
- *   buffers internal memory
- * See also:
- *   kiro_trb_reshape, kiro_trb_adopt,
- *   kiro_trb_clone
- */
-uint64_t kiro_trb_get_raw_size (KiroTrb* trb);
-
-
-/**
- * kiro_trb_get_raw_buffer - Returns a pointer to the buffer memory
- * @trb: KIRO TRB to perform the operation on
- * Description:
- *   Returns a pointer to the memory structure of the given buffer.
- * Notes:
- *   The returned pointer points to the beginning of the internal
- *   memory of the buffer, including all header information. The
- *   user is responsible to ensure the consistency of any data
- *   written to the memory and should call 'kiro_trb_refesh' in
- *   case any header information was changed.
- *   The pointed to memory might become invalid at any time by
- *   concurrent access to the TRB, reshaping, adopting or cloning
- *   a new memory block.
- *   Under no circumstances might the memory pointed to by the returned
- *   pointer be 'freed' by the user!
- *   If this function is called on a buffer that is not yet setup,
- *   a NULL pointer is returned instead.
- * See also:
- *   kiro_trb_refesh, kiro_trb_reshape, kiro_trb_adopt, kiro_trb_clone
- */
-void* kiro_trb_get_raw_buffer (KiroTrb* trb);
-
-
-/**
- * kiro_trb_get_element - Returns a pointer to the element at the given
- * index.
- * @trb: KIRO TRB to perform the operation on
- * @index: Index of the element in the buffer to access
- * Description:
- *   Returns a pointer to the element in the buffer at the given index.
- * Notes:
- *   The returned pointer to the element is only guaranteed to be valid
- *   immediately after the function call. The user is responsible to
- *   ensure that no data is written to the returned memory. The
- *   element pointed to might become invalid at any time by any concurrent
- *   access to the buffer wraping around and overwriting the element or
- *   changing the buffer memory entirely.
- *   Under no circumstances might the memory pointed to by the returned
- *   pointer be 'freed' by the user!
- *   If this function is called on a buffer that is not yet setup,
- *   a NULL pointer is returned instead.
- * See also:
- *   kiro_trb_get_element_size, kiro_trb_get_raw_buffer
- */
-void* kiro_trb_get_element (KiroTrb* trb, uint64_t index);
-
-
-/**
- * kiro_trb_dma_push - Gives DMA to the next element and pushes the buffer
- * @trb: KIRO TRB to perform the operation on
- * Description:
- *   Returns a pointer to the next element in the buffer and increases
- *   all internal counters and meta data as if an element was pushed
- *   onto the buffer.
- * Notes:
- *   The returned pointer to the element is only guaranteed to be valid
- *   immediately after the function call. The user is responsible to
- *   ensure that no more data is written than 'element_size'. The
- *   element pointed to might become invalid at any time by any concurrent
- *   access to the buffer wraping around and overwriting the element or
- *   changing the buffer memory entirely.
- *   Under no circumstances might the memory pointed to by the returned
- *   pointer be 'freed' by the user!
- *   If this function is called on a buffer that is not yet setup,
- *   a NULL pointer is returned instead.
- * See also:
- *   kiro_trb_push, kiro_trb_get_element_size, kiro_trb_get_raw_buffer
- */
-void* kiro_trb_dma_push (KiroTrb*);
-
-
-/**
- * kiro_trb_flush - Resets the buffer
- * @trb: KIRO TRB to perform the operation on
- * Description:
- *   Resets the internal buffer structures so the buffer is
- *   'empty' again.
- * Notes:
- *   The underlying memory is not cleared, freed or rewritten.
- *   Only the header is rewritten and the internal pointer and
- *   counter structures get reset to zero.
- * See also:
- *   kiro_trb_reshape, kiro_trb_adopt, kiro_trb_clone
- */
-void kiro_trb_flush (KiroTrb* trb);
-
-
-/**
- * kiro_trb_is_setup - Returns the setup status of the buffer
- * @trb: KIRO TRB to perform the operation on
- * Description:
- *   Returns an integer designating of the buffer is ready to
- *   be used or needs to be 'reshaped' before it can accept data
- * Notes:
- *   A return value of 0 designates that the buffer is not ready
- *   to be used. Values greater than 0 designate that the buffer
- *   is setup properly and is ready to accept data.
- * See also:
- *   kiro_trb_reshape, kiro_trb_adopt, kiro_trb_clone
- */
-int kiro_trb_is_setup (KiroTrb* trb);
-
-
-/**
- * kiro_trb_reshape - Reallocates internal memory and structures
- * @trb: KIRO TRB to perform the operation on
- * @element_size: Individual size of the elements to store in bytes
- * @element_count: Maximum number of elements to be stored
- * Description:
- *   (Re)Allocates internal memory for the given ammount of elements
- *   at the given individual size
- * Notes:
- *   If this function gets called when the buffer already has internal
- *   memory (buffer is setup), that memory gets freed automatically.
- *   If the function fails (Negative return value) none of the old
- *   memory and data structures get changed.
- * See also:
- *   kiro_trb_is_setup, kiro_trb_reshape, kiro_trb_adopt, kiro_trb_clone
- */
-int kiro_trb_reshape (KiroTrb* trb, uint64_t element_size, uint64_t element_count);
-
-
-/**
- * kiro_trb_clone - Clones the given memory into the internal memory
- * @trb: KIRO TRB to perform the operation on
- * @source: Pointer to the source memory to clone from
- * Description:
- *   Interprets the given memory as a pointer to another KIRO TRB and
- *   tries to copy that memory into its own.
- * Notes:
- *   The given memory is treated as a correct KIRO TRB memory block,
- *   including a consistend memory header. That header is read and
- *   then cloned into the internal memory according to the headers
- *   information.
- *   If the given memory is not a consistent KIRO TRB memory block,
- *   the behavior of this function is undefined.
- *   Returns 0 if the buffer was cloned and -1 if memory allocation
- *   failed.
- * See also:
- *   kiro_trb_reshape, kiro_trb_adopt
- */
-int kiro_trb_clone (KiroTrb* trb, void* source);
-
-
-/**
- * kiro_trb_push - Adds an element into the buffer
- * @trb: KIRO TRB to perform the operation on
- * @source: Pointer to the memory of the element to add
- * Description:
- *   Copies the given element and adds it into the buffer
- * Notes:
- *   This function will read n-Bytes from the given address according
- *   to the setup element_size. The read memory is copied directly
- *   into the internal memory structure.
- *   Returns 0 on success, -1 on failure.
- *   In case of failure, no internal memory will change as if the
- *   call to kiro_trb_push has never happened.
- * See also:
- *   kiro_trb_dma_push, kiro_trb_get_element_size, kiro_trb_clone,
- *   kiro_trb_adopt
- */
-int kiro_trb_push (KiroTrb* trb, void* source);
-
-
-/**
- * kiro_trb_refresh - Re-reads the TRBs memory header
- * @trb: KIRO TRB to perform the operation on
- * Description:
- *   Re-reads the internal memory header and sets up all pointers
- *   and counters in accordance to these information
- * Notes:
- *   This function is used in case the TRBs memory got changed
- *   directly (For example, by a DMA operation) to make the TRB
- *   aware of the changes to its memory. Only the buffers memory
- *   header is examined and changes are made according to these
- *   informations.
- * See also:
- *   kiro_trb_get_raw_buffer, kiro_trb_push_dma, kiro_trb_adopt
- */
-void kiro_trb_refresh (KiroTrb* trb);
-
-
-/**
- * kiro_trb_adopt - Adopts the given memory into the TRB
- * @trb: KIRO TRB to perform the operation on
- * @source: Pointer to the source memory to adopt
- * Description:
- *   Interprets the given memory as a pointer to another KIRO TRB and
- *   takes ownership over the memory.
- * Notes:
- *   The given memory is treated as a correct KIRO TRB memory block,
- *   including a consistend memory header. That header is read and
- *   the TRB sets up all internal structures in accordance to that
- *   header.
- *   If the given memory is not a consistent KIRO TRB memory block,
- *   the behavior of this function is undefined.
- *   The TRB takes full ownership of the given memory and may free
- *   it at will.
- * See also:
- *   kiro_trb_clone, kiro_trb_reshape
- */
-void kiro_trb_adopt (KiroTrb* trb, void* source);
-
-G_END_DECLS
-
-#endif //__KIRO_TRB_H
\ No newline at end of file