summaryrefslogtreecommitdiffstats
path: root/tests/ipecamera
diff options
context:
space:
mode:
Diffstat (limited to 'tests/ipecamera')
-rwxr-xr-xtests/ipecamera/bench.sh34
-rwxr-xr-xtests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh326
-rwxr-xr-xtests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh325
-rwxr-xr-xtests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh318
-rwxr-xr-xtests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh323
-rwxr-xr-xtests/ipecamera/debug/incomplete.sh37
-rwxr-xr-xtests/ipecamera/frame.sh36
-rwxr-xr-xtests/ipecamera/frame_req.sh27
-rwxr-xr-xtests/ipecamera/grab-hwtrigger.sh20
-rwxr-xr-xtests/ipecamera/stimuli.sh30
-rwxr-xr-xtests/ipecamera/tests/loopback-test.sh87
-rwxr-xr-xtests/ipecamera/tests/run-and-decode-test.sh103
12 files changed, 0 insertions, 1666 deletions
diff --git a/tests/ipecamera/bench.sh b/tests/ipecamera/bench.sh
deleted file mode 100755
index 09edae9..0000000
--- a/tests/ipecamera/bench.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/bash
-
-function pci {
- PCILIB_PATH="/root/pcitool"
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-size=16
-bytes=`expr $size "*" 4`
-
-rm -f bench.out
-pci --stop-dma dma1
-pci --reset
-
-#pci -w xrawdata_packet_length $bytes
-
-pci --start-dma dma1
-pci -w control 0x1e5
-sleep 1
-pci -w control 0x1e1
-
-sleep 1
-pci -w control 0x3e1
-for i in `seq 1 10`; do
-# pci -w control 0x1e1
- pci -w dma1 -s $size "*$i"
-# pci -w control 0x3e1
- usleep 100000
- pci -r dma1 -s $size -o bench.out
-done
-
-pci -w control 0x1e1
-pci --stop-dma dma1
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh
deleted file mode 100755
index f4afa06..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh
+++ /dev/null
@@ -1,326 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 10 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 80000204
-sleep .1
-#echo " Release Reset for Readout"
-#pci -w 0x9040 800001e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 10 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 10 bit mode, set ADC resolution 10 bits "
-val=f000 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
- error=1
- # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa25
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-#pci -w 0x9040 80000201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 1088
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-###################################### NUMBER OF OUTPUT ############################################################
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c800
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd011
-sleep 0.01
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-#########################################################################################################
-sleep 0.01
-
-
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x71
-
-#echo " Reset Readout and CMOSIS "
-pci -w 0x9040 0x80000204
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 0x80000201
-sleep .1
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "8449ffff0f0010013ffff111" ]; then
- echo "--------------------------------->>>> ERROR! in the camera status ... "
- echo " $status "
- error=1
- # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
- echo " Error in the reset and initialization"
-else
- echo " Camera READY ........................... OK"
-fi
-echo
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
-
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh
deleted file mode 100755
index 5a4e582..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh
+++ /dev/null
@@ -1,325 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 10 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 80000204
-sleep .1
-#echo " Release Reset for Readout"
-#pci -w 0x9040 800001e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 10 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 10 bit mode, set ADC resolution 10 bits "
-val=f000 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
- error=1
- # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa25
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-#pci -w 0x9040 80000201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 2047
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-###################################### NUMBER OF OUTPUT ############################################################
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c800
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd011
-sleep 0.01
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-#########################################################################################################
-sleep 0.01
-
-
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x71
-
-#echo " Reset Readout and CMOSIS "
-pci -w 0x9040 0x80000204
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 0x80000201
-sleep .1
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "8449ffff0f0010013ffff111" ]; then
- echo "--------------------------------->>>> ERROR! in the camera status ... "
- error=1
- # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
- echo " Error in the reset and initialization"
-else
- echo " Camera READY ........................... OK"
-fi
-echo
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
-
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh
deleted file mode 100755
index 3c4af0e..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh
+++ /dev/null
@@ -1,318 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 12 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 1e4
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 1e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 11 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 11 bit mode, set ADC resolution 11 bits "
-val=f001 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
- error =1
- # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa25
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab02
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-pci -w 0x9040 201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 1088
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-########################################################################################################
-#pci -w 0x9000 0xc802
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c802
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-#pci -r 0x9000 -s 10
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x1C
-
-sleep 0.01
-#pci -w 0x9000 0xd011
-sleep 0.01
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-#pci -r 0x9000 -s 10
-#########################################################################################################
-sleep 0.01
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "8449ffff0f0010013ffff111" ]; then
- echo "--------------------------------->>>> ERROR! in the camera status ... "
- error =1
- # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
- echo " Error in the resetand initialization"
-else
- echo " Camera READY ........ OK"
-fi
-echo
-
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh
deleted file mode 100755
index b04f2cd..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh
+++ /dev/null
@@ -1,323 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 12 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 1e4
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 1e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 12 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 12 bit mode, set ADC resolution 12 bits "
-val=f002 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
- error =1
- # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa0f
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-pci -w 0x9040 201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 1088
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-########################################################################################################
-#pci -w 0x9000 0xc802
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c802
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x1C
-
-
-#pci -w 0x9000 0xd011
-sleep 0.01
-pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-sleep 0.01
-pci -r 0x9000 -s 10
-#########################################################################################################
-sleep 0.1
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "844950280f0010013ffff111" ]; then
-
- echo "--------------------------------->>>> ERROR! in the camera status ... "
- echo $status
- error=1
- # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
- echo " Error in the resetand initialization"
-else
- echo " Camera READY ........ OK"
-fi
-echo
-
-
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
diff --git a/tests/ipecamera/debug/incomplete.sh b/tests/ipecamera/debug/incomplete.sh
deleted file mode 100755
index 5c80198..0000000
--- a/tests/ipecamera/debug/incomplete.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-#! /bin/bash
-
-function pci {
- PCILIB_PATH="/root/pcitool"
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-rm -f images.raw
-touch images.raw
-
-echo "Starting the grabber"
-pci --stop-dma
-pci --start-dma dma1
-pci -g -o images.raw --run-time 1000000000 &
-pid=$!
-
-usleep 1000000
-
-for i in `seq 1 100000`; do
- old_size=`ls -la images.raw | cut -d " " -f 5`
- echo "Trigger $i"
- pci --trigger
- usleep 100000
- new_size=`ls -la images.raw | cut -d " " -f 5`
- if [ $old_size -eq $new_size ]; then
- sleep 2
- new_size=`ls -la images.raw | cut -d " " -f 5`
- if [ $old_size -eq $new_size ]; then
- echo "Incomplete frame..."
- killall -SIGINT pci
- break
- fi
- fi
-done
-
-echo "Waiting grabber to finish"
-wait $pid
diff --git a/tests/ipecamera/frame.sh b/tests/ipecamera/frame.sh
deleted file mode 100755
index 679817b..0000000
--- a/tests/ipecamera/frame.sh
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/bash
-
-TESTS_PATH="`dirname \"$0\"`"
-TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`"
-
-function pci {
- PCILIB_PATH=$TESTS_PATH/..
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-pci --stop-dma dma1
-#pci --reset
-
-echo "Set packet size 1024 .. "
-pci -w cmosis_number_lines 1088
-#pci -w xrawdata_packet_length 4096
-pci --start-dma dma1
-usleep 1000
-
-echo "Send frame request ... "
-pci -w control 1e9
-usleep 100000
-pci -w control 1e1
-usleep 100000
-
-echo "Enable Readout ... "
-pci -w control 3e1
-
-usleep 100000
-
-pci -r dma1 -o bench.out --multipacket
-
-pci -w control 1e1
-
-pci --stop-dma dma1
-
diff --git a/tests/ipecamera/frame_req.sh b/tests/ipecamera/frame_req.sh
deleted file mode 100755
index bce89c3..0000000
--- a/tests/ipecamera/frame_req.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/bash
-
-function pci {
- PCILIB_PATH="/root/pcitool"
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-#pci --stop-dma dma1
-#pci --reset
-
-echo "Set packet size 1024 .. "
-pci -w cmosis_number_lines 1088
-#pci -w xrawdata_packet_length 4096
-pci --start-dma dma1
-usleep 1000
-
-echo "Send frame request ... "
-pci -w control 1e9
-usleep 100000
-pci -w control 1e1
-usleep 100000
-
-echo "Enable Readout 3... "
-pci -w control 3e1
-usleep 1000000
-pci -w control 1e1
-
diff --git a/tests/ipecamera/grab-hwtrigger.sh b/tests/ipecamera/grab-hwtrigger.sh
deleted file mode 100755
index 0279ab4..0000000
--- a/tests/ipecamera/grab-hwtrigger.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#! /bin/bash
-
-function pci {
- PCILIB_PATH="/root/pcitool"
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-function enable_hw_trigger {
- usleep 100000
- pci -w control 0xa01
-}
-
-rm -f images.raw
-
-enable_hw_trigger &
-pid=$!
-
-echo "Starting the grabber"
-pci -g -o images.raw --run-time 60000000 --verbose 10 -o /dev/null
-wait $pid
diff --git a/tests/ipecamera/stimuli.sh b/tests/ipecamera/stimuli.sh
deleted file mode 100755
index 33e99e1..0000000
--- a/tests/ipecamera/stimuli.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/bash
-
-function pci {
- PCILIB_PATH="/root/pcitool"
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-rm -f bench.out
-
-echo "Set FFFF the frame space .."
-pci -w 0x9180 fff
-
-echo "Set the number of frames .."
-pci -w reg9170 55
-
-pci --start-dma dma1
-
-echo "Send frame request ... "
-pci -w control 1f1
-usleep 100000
-pci -w control 1e1
-
-
-echo "Enable Readout ... "
-pci -w control 3e1
-pci -r dma1 -o bench.out --multipacket
-pci -w control 1e1
-
-pci --stop-dma dma1
-
diff --git a/tests/ipecamera/tests/loopback-test.sh b/tests/ipecamera/tests/loopback-test.sh
deleted file mode 100755
index 1c033cc..0000000
--- a/tests/ipecamera/tests/loopback-test.sh
+++ /dev/null
@@ -1,87 +0,0 @@
-#! /bin/bash
-
-TESTS_PATH="`dirname \"$0\"`"
-TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`"
-
-function pci {
- PCILIB_PATH=$TESTS_PATH/..
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-function compare {
- PCILIB_PATH=$TESTS_PATH/..
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/apps/compare_to_value $*
-}
-
-#size=`expr 1024 "*" 1024`
-size=`expr 1024 "*" 1`
-multiplier=2
-wait=0
-
-/root/pcitool/tests/ipecamera/frame.sh &> /dev/null
-rm -f bench.out
-
-pci --stop-dma dma1
-pci --start-dma dma1
-
-pci -r dma1 -s 16777216 --multipacket -o /dev/null &> /dev/null
-
-pci -r dma1 -s 1024 -o /dev/null | grep -i "Error (62)" &> /dev/null
-if [ $? -ne 0 ]; then
- echo "There is data on dma..."
- exit
-fi
-
-failed=0
-send=0
-errors=0
-err_num=0
-
-print_iters=`expr 2 + 1024 '*' 100 / $size`
-
-read_size=`expr $multiplier '*' $size`
-echo "Starting..."
-i=1
-
-pci -w 0x9040 0x201
-
-while [ 1 ]; do
- if [ $wait -gt 0 ]; then
- pci -w 0x9040 0x1
- fi
-
- pci -w dma1 -s $size "*0x$i"
- rm -f /tmp/camera-test.out
- pci -r dma1 --wait --multipacket -s $read_size -o /tmp/camera-test.out -t 1000000 &> /dev/null
- if [ $wait -gt 0 ]; then
- wrdone=0
- while [ $wrdone -eq 0 ]; do
-# pci --list-dma-engines
- pci --list-dma-engines | grep "DMA1 S2C" | grep "SD" #&> /dev/null
- wrdone=$?
- done
- pci -w 0x9040 0x201
- fi
-
- res=`compare /tmp/camera-test.out $read_size "$i" 6 2 6`
- if [ $? -eq 0 ]; then
- err_cnt=`echo $res | cut -f 1 -d ' '`
- if [ "$err_cnt" -ne 0 ]; then
- pci -r dma1 --wait --multipacket -o /tmp/camera-test.out -t 1000000 &> /dev/null
- cp /tmp/camera-test.out /tmp/camera-test.out.$err_num
- err_num=$(($err_num + 1))
- fi
- byte_cnt=`echo $res | cut -f 3 -d ' '`
- send=$(($send + $byte_cnt * 4))
- errors=$(($errors + $err_cnt * 4))
- else
- failed=$(($failed + 1))
- fi
-
- i=$((i + 1))
- if [ $i -eq $print_iters ]; then
- echo "Data send: $send bytes, Errors: $errors bytes, Failed exchanges: $failed"
-# pci -r 0x9070 -s 4
- i=1
- fi
-done
diff --git a/tests/ipecamera/tests/run-and-decode-test.sh b/tests/ipecamera/tests/run-and-decode-test.sh
deleted file mode 100755
index d355475..0000000
--- a/tests/ipecamera/tests/run-and-decode-test.sh
+++ /dev/null
@@ -1,103 +0,0 @@
-#! /bin/bash
-
-location=/mnt/fast/
-#location="./"
-duration=10000000
-wait_frame=1000000
-
-TESTS_PATH="`dirname \"$0\"`"
-TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`"
-
-function pci {
- PCILIB_PATH=$TESTS_PATH/..
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-function stop {
- usleep $duration
- pci -w control 0x201 &> /dev/null
-}
-
-function reset {
- pci -r 0x9000 -s 256 > $1.status
- $TESTS_PATH/ipecamera/Reset_Init_all_reg_10bit.sh &> $1.reset
-}
-
-
-$TESTS_PATH/ipecamera/cfg/Reset_Init_all_reg_10bit.sh &> /dev/null
-$TESTS_PATH/ipecamera/frame.sh &> /dev/null
-rm -f bench.out
-
-pci --stop-dma
-pci --start-dma dma1
-
-
-pci -r dma1 -s 16777216 --multipacket -o /dev/null &> /dev/null
-
-pci -r dma1 -s 1 | grep -i "Error (62)" &> /dev/null
-if [ $? -ne 0 ]; then
- echo "There is data on dma..."
- exit
-fi
-
-echo "Starting ... "
-
-decode_failures=0
-failures=0
-failed=0
-frames=0
-fpga_failures=0
-cmosis_failures=0
-frame_rate_failures=0
-
-iter=0
-while [ 1 ]; do
- pci -w control 0xa01 &> /dev/null
- stop &
-
- output="$location/test$iter.out"
- rm -f $output
- pci -r dma1 -o $output --wait --multipacket -t $wait_frame &> /dev/null
-
- killall -9 usleep &> /dev/null
- usleep 100000
- pci -w control 0x201 &> /dev/null
-
- if [ -f $output ]; then
- result=`ipedec -d -v --continue $output 2>&1 | grep -iE "failed|decoded"`
- cur_failed=`echo $result | wc -l`
- cur_decoded=`echo $result | tail -n 1 | grep -i decoded`
- if [ $? -ne 0 -o $cur_failed -eq 0 ]; then
- ipedec -d -v --continue $output > $output.decode
- decode_failures=$(($decode_failures + 1))
- reset $output
- else
- cur_failed=$(($cur_failed - 1))
- cur_frames=`echo $cur_decoded | cut -f 2 -d ' '`
- failed=$(($failed + $cur_failed))
- frames=$(($frames + $cur_frames))
- fpga_status=`pci -r 0x9054 | awk '{print $2;}' | cut -c 2`
- cmosis_status=`pci -r 0x9050 | awk '{print $2;}' | cut -c 3-4`
- if [ "$fpga_status" != "f" ]; then
- fpga_failures=$(($fpga_failures + 1))
- reset $output
- elif [ "$cmosis_status" == "7d" ]; then
- cmosis_failures=$(($cmosis_failures + 1))
- reset $output
- elif [ $cur_frames -lt 10 ]; then
- frame_rate_failures=$(($frame_rate_failures + 1))
- reset $output
- elif [ $cur_failed -eq 0 ]; then
- rm -f $output
- else
- reset $output
- fi
- fi
- else
- failures=$(($failures + 1))
- reset $output
- fi
-
- echo "Frames: $frames, Failed Frames: $failed, Failed Exchanges: $failures, Failed Decodings: $decode_failures, FPGA Failures: $fpga_failures, CMOSIS Failures: $cmosis_failures, Low Frame Rate: $frame_rate_failures"
- iter=`expr $iter + 1`
-done