Add forgotten ipe_benchmark.c

3 files changed, 106 insertions, 6 deletions

diff --git a/tests/device_info.sh b/tests/device_info.sh
new file mode 100755
index 0000000..21e59db
--- /dev/null
+++ b/tests/device_info.sh
@@ -0,0 +1,81 @@
+#! /bin/bash
+
+BAR=0
+
+function pci {
+    PCILIB_PATH=`pwd`/..
+    LD_LIBRARY_PATH="$PCILIB_PATH/pcilib" $PCILIB_PATH/pcitool/pci $*
+}
+
+
+function read_cfg {
+    pci -a config -r 0x$1 | awk '{ print $2; }' | sed -e 's/\s*//g' -e '/^\s*$/d'
+}
+
+function parse_config {
+    info=0x`pci -b $BAR -r 0 | awk '{ print $2; }' | sed -e 's/\s*//g' -e '/^\s*$/d'`
+    model=`printf "%X" $((info>>24))`
+    if [ $model -eq 14 ]; then
+	model="Xilinx Virtex-6"
+    else
+	model="Xilinx $model"
+    fi
+    version=$(((info >> 8) & 0xFF))
+    data_width=$((16 * (2 ** ((info >> 16) & 0xF))))
+    
+    echo "$model, build $version, $data_width bits"
+
+
+    next=`read_cfg 34 | cut -c 7-8`
+#    next=`printf "%u" $next`
+
+    while [ $((0x$next)) -ne 0 ]; do
+	cap=`read_cfg $next`
+	capid=`echo $cap | cut -c 7-8`
+	if [ $capid -eq 10 ]; then
+	    addr=`printf "%X" $((0x$next + 4))`
+	    device_capabilities=`read_cfg $addr`
+
+	    addr=`printf "%X" $((0x$next + 8))`
+	    device_control=`read_cfg $addr`
+
+	    addr=`printf "%X" $((0x$next + 12))`
+	    pcie_link1=`read_cfg $addr`
+	    addr=`printf "%X" $((0x$next + 16))`
+	    pcie_link2=`read_cfg $addr`
+
+	    link_speed=$((((0x$pcie_link2 & 0xF0000) >> 16)))
+	    link_width=$((((0x$pcie_link2 & 0x3F00000) >> 20)))
+
+	    dev_link_speed=$((((0x$pcie_link1 & 0xF))))
+	    dev_link_width=$((((0x$pcie_link1 & 0x3F0) >> 4)))
+	    
+	    max_payload=$(((1 << ((0x$device_capabilities & 0x07) + 7))))
+	    dev_payload=$(((1 << (((0x$device_capabilities >> 5) & 0x07) + 7))))
+	fi
+	next=`echo $cap | cut -c 5-6`
+    done
+
+    echo "Link: PCIe gen$link_speed x$link_width"
+    if [ $link_speed -ne $dev_link_speed -o $link_width -ne $dev_link_width ]; then
+	echo " * But device capable of gen$dev_link_speed x$dev_link_width"
+    fi
+    
+    echo "Payload: $dev_payload"
+    if [ $dev_payload -ne $max_payload ]; then
+	echo " * But device capable of $max_payload"
+    fi
+    
+    
+    info=0x`read_cfg 40`
+    max_tlp=$((2 ** (5 + ((info & 0xE0) >> 5))))
+    echo "TLP: 32 dwords (transfering 32 TLP per request)"
+    if [ $max_tlp -ne 32 ]; then
+	echo " * But device is able to transfer TLP up to $max_tlp bytes"
+    fi
+    
+    # 2500 MT/s, but PCIe gen1 and gen2 uses 10 bit encoding
+    speed=$((link_width * link_speed * 2500 / 10))
+}
+
+parse_config
diff --git a/tests/new_device.sh b/tests/new_device.sh
deleted file mode 100755
index e3f8f8a..0000000
--- a/tests/new_device.sh
+++ /dev/null
@@ -1,6 +0,0 @@
-#! /bin/bash
-
-#Add new device to the driver
-#echo "10ee 6028" > /sys/bus/pci/drivers/pciDriver/new_id
-#Enable bus mastering
-#setpci -s 03:00.0 4.w=0x07
diff --git a/tests/reload.sh b/tests/reload.sh
new file mode 100755
index 0000000..62c6e22
--- /dev/null
+++ b/tests/reload.sh
@@ -0,0 +1,25 @@
+#! /bin/bash
+
+device=`lspci -n | grep -m 1 "10ee:" | awk '{print $1}'`
+if [ -z "$device" ]; then
+    echo "Xilinx device doesn't exist, rescanning..."
+    echo 1 > /sys/bus/pci/rescan
+    exit
+else
+    echo "Xilinx is located at: " $device
+fi
+echo "remove driver"
+rmmod pciDriver 
+echo "remove devices"
+echo  1 > /sys/bus/pci/devices/0000\:${device:0:2}\:${device:3:4}/remove
+sleep 1
+echo "rescan"
+echo 1 > /sys/bus/pci/rescan
+sleep 1
+echo "instantiate driver"
+modprobe pciDriver
+# for devices with different ID
+#echo "10ee 6028" > /sys/bus/pci/drivers/pciDriver/new_id
+pci -i
+#echo Enabling bus mastering on device $dev
+#setpci -s $device 4.w=0x07