Add HEB scripts and re-organize the structure

1 files changed, 0 insertions, 121 deletions

diff --git a/tests/xilinx_dma.sh b/tests/xilinx_dma.sh
deleted file mode 100755
index 6aada8b..0000000
--- a/tests/xilinx_dma.sh
+++ /dev/null
@@ -1,121 +0,0 @@
-#! /bin/bash
-
-BAR=0
-USE=1
-ITERATIONS=2
-BUFFERS=16
-
-function pci {
-    PCILIB_PATH=`pwd`/..
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-
-function reset {
-    pci -b $BAR -w 0 1
-    usleep 1000
-    pci -b $BAR -w 0 0
-    pci -b $BAR -w 4 0
-}
-
-function read_cfg {
-#    echo $1 1>&2
-    pci -a config -r 0x$1 | awk '{ print $2; }'
-}
-
-function parse_config {
-    info=0x`pci -b $BAR -r 0 | awk '{ print $2; }'`
-    model=`printf "%X" $((info>>24))`
-    if [ $model -eq 14 ]; then
-	model="Xilinx Virtex-6"
-    else
-	model="Xilinx $model"
-    fi
-    version=$(((info >> 8) & 0xFF))
-    data_width=$((16 * (2 ** ((info >> 16) & 0xF))))
-    
-    echo "$model, build $version, $data_width bits"
-
-
-    next=`read_cfg 34 | cut -c 7-8`
-
-    while [ $next -ne 0 ]; do
-	cap=`read_cfg $next`
-	capid=`echo $cap | cut -c 7-8`
-	if [ $capid -eq 10 ]; then
-	    addr=`printf "%X" $((0x$next + 12))`
-	    pcie_link1=`read_cfg $addr`
-	    addr=`printf "%X" $((0x$next + 16))`
-	    pcie_link2=`read_cfg $addr`
-
-	    link_speed=$((((0x$pcie_link2 & 0xF0000) >> 16)))
-	    link_width=$((((0x$pcie_link2 & 0x3F00000) >> 20)))
-
-	    dev_link_speed=$((((0x$pcie_link1 & 0xF))))
-	    dev_link_width=$((((0x$pcie_link1 & 0x3F0) >> 4)))
-	fi
-	next=`echo $cap | cut -c 5-6`
-    done
-
-    echo "Link: PCIe gen$link_speed x$link_width"
-    if [ $link_speed -ne $dev_link_speed -o $link_width -ne $dev_link_width ]; then
-	echo " * But device capable of gen$dev_link_speed x$dev_link_width"
-    fi
-    
-    info=0x`read_cfg 40`
-    max_tlp=$((2 ** (5 + ((info & 0xE0) >> 5))))
-    echo "TLP: 32 dwords (transfering 32 TLP per request)"
-    if [ $max_tlp -ne 32 ]; then
-	echo " * But device is able to transfer TLP up to $max_tlp bytes"
-    fi
-    
-    # 2500 MT/s, but PCIe gen1 and gen2 uses 10 bit encoding
-    speed=$((link_width * link_speed * 2500 / 10))
-}
-
-reset
-parse_config
-
-pci --enable-irq
-pci --acknowledge-irq
-
-pci --free-kernel-memory $USE
-pci --alloc-kernel-memory $USE --type c2s -s $BUFFERS
-bus=`pci --list-kernel-memory 00100001 | awk '{ print $4; }' | grep 00`
-#ptr=`pci --list-kernel-memory 00100001 | awk '{ print $2; }' | grep 00`
-
-# TLP size
-pci -b $BAR -w 0x0C 0x20
-# TLP count
-pci -b $BAR -w 0x10 0x20
-# Data
-pci -b $BAR -w 0x14 0x13131313
-
-dmaperf=0
-for i in `seq 1 $ITERATIONS`; do
-  for addr in $bus; do 
-    pci -b $BAR -w 0x08 0x$addr
-
-#Trigger
-    pci -b $BAR -w 0x04 0x01
-    pci --wait-irq
-#    pci -b $BAR -w 0x04 0x00
-
-    status=`pci -b $BAR -r 0x04 | awk '{print $2; }' | cut -c 5-8`
-    if [ $status != "0101" ]; then
-	echo "Read failed, invalid status: $status"
-    fi
-
-    dmaperf=$((dmaperf + 0x`pci -b $BAR -r 0x28 | awk '{print $2}'`))
-    reset
-  done
-done
-
-pci --free-kernel-memory $USE
-pci --disable-irq
-
-echo
-# Don't ask me about this formula
-echo "Performance reported by FPGA: $((4096 * BUFFERS * ITERATIONS * $speed / $dmaperf / 8)) MB/s"
-
-#pci -b $BAR  -r 0 -s 32