# This is an example of a bring your own (byo) host inventory # Create an OSEv3 group that contains the masters and nodes groups [OSEv3:children] masters nodes etcd lb nfs # Set variables common for all OSEv3 hosts [OSEv3:vars] # Enable unsupported configurations, things that will yield a partially # functioning cluster but would not be supported for production use #openshift_enable_unsupported_configurations=false # SSH user, this user should allow ssh based auth without requiring a # password. If using ssh key based auth, then the key should be managed by an # ssh agent. ansible_ssh_user=root # If ansible_ssh_user is not root, ansible_become must be set to true and the # user must be configured for passwordless sudo #ansible_become=yes # Debug level for all OpenShift components (Defaults to 2) debug_level=2 # Specify the deployment type. Valid values are origin and openshift-enterprise. openshift_deployment_type=openshift-enterprise # Specify the generic release of OpenShift to install. This is used mainly just during installation, after which we # rely on the version running on the first master. Works best for containerized installs where we can usually # use this to lookup the latest exact version of the container images, which is the tag actually used to configure # the cluster. For RPM installations we just verify the version detected in your configured repos matches this # release. openshift_release=v3.7 # Specify an exact container image tag to install or configure. # WARNING: This value will be used for all hosts in containerized environments, even those that have another version installed. # This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. #openshift_image_tag=v3.7.0 # Specify an exact rpm version to install or configure. # WARNING: This value will be used for all hosts in RPM based environments, even those that have another version installed. # This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. #openshift_pkg_version=-3.7.0 # This enables all the system containers except for docker: #openshift_use_system_containers=False # # But you can choose separately each component that must be a # system container: # #openshift_use_openvswitch_system_container=False #openshift_use_node_system_container=False #openshift_use_master_system_container=False #openshift_use_etcd_system_container=False # # In either case, system_images_registry must be specified to be able to find the system images #system_images_registry="registry.access.redhat.com" # Manage openshift example imagestreams and templates during install and upgrade #openshift_install_examples=true # Configure logoutURL in the master config for console customization # See: https://docs.openshift.org/latest/install_config/web_console_customization.html#changing-the-logout-url #openshift_master_logout_url=http://example.com # Configure extensionScripts in the master config for console customization # See: https://docs.openshift.org/latest/install_config/web_console_customization.html#loading-custom-scripts-and-stylesheets #openshift_master_extension_scripts=['/path/to/script1.js','/path/to/script2.js'] # Configure extensionStylesheets in the master config for console customization # See: https://docs.openshift.org/latest/install_config/web_console_customization.html#loading-custom-scripts-and-stylesheets #openshift_master_extension_stylesheets=['/path/to/stylesheet1.css','/path/to/stylesheet2.css'] # Configure extensions in the master config for console customization # See: https://docs.openshift.org/latest/install_config/web_console_customization.html#serving-static-files #openshift_master_extensions=[{'name': 'images', 'sourceDirectory': '/path/to/my_images'}] # Configure extensions in the master config for console customization # See: https://docs.openshift.org/latest/install_config/web_console_customization.html#serving-static-files #openshift_master_oauth_template=/path/to/login-template.html # Configure imagePolicyConfig in the master config # See: https://godoc.org/github.com/openshift/origin/pkg/cmd/server/api#ImagePolicyConfig #openshift_master_image_policy_config={"maxImagesBulkImportedPerRepository": 3, "disableScheduledImport": true} # Configure master API rate limits for external clients #openshift_master_external_ratelimit_qps=200 #openshift_master_external_ratelimit_burst=400 # Configure master API rate limits for loopback clients #openshift_master_loopback_ratelimit_qps=300 #openshift_master_loopback_ratelimit_burst=600 # Docker Configuration # Add additional, insecure, and blocked registries to global docker configuration # For enterprise deployment types we ensure that registry.access.redhat.com is # included if you do not include it #openshift_docker_additional_registries=registry.example.com #openshift_docker_insecure_registries=registry.example.com #openshift_docker_blocked_registries=registry.hacker.com # Disable pushing to dockerhub #openshift_docker_disable_push_dockerhub=True # Use Docker inside a System Container. Note that this is a tech preview and should # not be used to upgrade! # The following options for docker are ignored: # - docker_version # - docker_upgrade # The following options must not be used # - openshift_docker_options #openshift_docker_use_system_container=False # Install and run cri-o along side docker # NOTE: This uses openshift_docker_systemcontainer_image_registry_override as it's override # just as container-engine does. #openshift_use_crio=False # Force the registry to use for the container-engine/crio system container. By default the registry # will be built off of the deployment type and ansible_distribution. Only # use this option if you are sure you know what you are doing! #openshift_docker_systemcontainer_image_override="registry.example.com/container-engine:latest" #openshift_crio_systemcontainer_image_override="registry.example.com/cri-o:latest" # Items added, as is, to end of /etc/sysconfig/docker OPTIONS # Default value: "--log-driver=journald" #openshift_docker_options="-l warn --ipv6=false" # Specify whether to run Docker daemon with SELinux enabled in containers. Default is True. # Uncomment below to disable; for example if your kernel does not support the # Docker overlay/overlay2 storage drivers with SELinux enabled. #openshift_docker_selinux_enabled=False # Specify exact version of Docker to configure or upgrade to. # Downgrades are not supported and will error out. Be careful when upgrading docker from < 1.10 to > 1.10. # docker_version="1.12.1" # Skip upgrading Docker during an OpenShift upgrade, leaves the current Docker version alone. # docker_upgrade=False # Specify exact version of etcd to configure or upgrade to. # etcd_version="3.1.0" # Enable etcd debug logging, defaults to false # etcd_debug=true # Set etcd log levels by package # etcd_log_package_levels="etcdserver=WARNING,security=DEBUG" # Upgrade Hooks # # Hooks are available to run custom tasks at various points during a cluster # upgrade. Each hook should point to a file with Ansible tasks defined. Suggest using # absolute paths, if not the path will be treated as relative to the file where the # hook is actually used. # # Tasks to run before each master is upgraded. # openshift_master_upgrade_pre_hook=/usr/share/custom/pre_master.yml # # Tasks to run to upgrade the master. These tasks run after the main openshift-ansible # upgrade steps, but before we restart system/services. # openshift_master_upgrade_hook=/usr/share/custom/master.yml # # Tasks to run after each master is upgraded and system/services have been restarted. # openshift_master_upgrade_post_hook=/usr/share/custom/post_master.yml # Alternate image format string, useful if you've got your own registry mirror # Configure this setting just on node or master #oreg_url_master=example.com/openshift3/ose-${component}:${version} #oreg_url_node=example.com/openshift3/ose-${component}:${version} # For setting the configuration globally #oreg_url=example.com/openshift3/ose-${component}:${version} # If oreg_url points to a registry other than registry.access.redhat.com we can # modify image streams to point at that registry by setting the following to true #openshift_examples_modify_imagestreams=true # If oreg_url points to a registry requiring authentication, provide the following: #oreg_auth_user=some_user #oreg_auth_password='my-pass' # NOTE: oreg_url must be defined by the user for oreg_auth_* to have any affect. # oreg_auth_pass should be generated from running docker login. # To update registry auth credentials, uncomment the following: #oreg_auth_credentials_replace: True # OpenShift repository configuration #openshift_additional_repos=[{'id': 'ose-devel', 'name': 'ose-devel', 'baseurl': 'http://example.com/puddle/build/AtomicOpenShift/3.1/latest/RH7-RHOSE-3.0/$basearch/os', 'enabled': 1, 'gpgcheck': 0}] #openshift_repos_enable_testing=false # htpasswd auth openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider', 'filename': '/etc/origin/master/htpasswd'}] # Defining htpasswd users #openshift_master_htpasswd_users={'user1': '', 'user2': ''} # or #openshift_master_htpasswd_file= # Allow all auth #openshift_master_identity_providers=[{'name': 'allow_all', 'login': 'true', 'challenge': 'true', 'kind': 'AllowAllPasswordIdentityProvider'}] # LDAP auth #openshift_master_identity_providers=[{'name': 'my_ldap_provider', 'challenge': 'true', 'login': 'true', 'kind': 'LDAPPasswordIdentityProvider', 'attributes': {'id': ['dn'], 'email': ['mail'], 'name': ['cn'], 'preferredUsername': ['uid']}, 'bindDN': '', 'bindPassword': '', 'ca': 'my-ldap-ca.crt', 'insecure': 'false', 'url': 'ldap://ldap.example.com:389/ou=users,dc=example,dc=com?uid'}] # # Configure LDAP CA certificate # Specify either the ASCII contents of the certificate or the path to # the local file that will be copied to the remote host. CA # certificate contents will be copied to master systems and saved # within /etc/origin/master/ with a filename matching the "ca" key set # within the LDAPPasswordIdentityProvider. # #openshift_master_ldap_ca= # or #openshift_master_ldap_ca_file= # OpenID auth #openshift_master_identity_providers=[{"name": "openid_auth", "login": "true", "challenge": "false", "kind": "OpenIDIdentityProvider", "client_id": "my_client_id", "client_secret": "my_client_secret", "claims": {"id": ["sub"], "preferredUsername": ["preferred_username"], "name": ["name"], "email": ["email"]}, "urls": {"authorize": "https://myidp.example.com/oauth2/authorize", "token": "https://myidp.example.com/oauth2/token"}, "ca": "my-openid-ca-bundle.crt"}] # # Configure OpenID CA certificate # Specify either the ASCII contents of the certificate or the path to # the local file that will be copied to the remote host. CA # certificate contents will be copied to master systems and saved # within /etc/origin/master/ with a filename matching the "ca" key set # within the OpenIDIdentityProvider. # #openshift_master_openid_ca= # or #openshift_master_openid_ca_file= # Request header auth #openshift_master_identity_providers=[{"name": "my_request_header_provider", "challenge": "true", "login": "true", "kind": "RequestHeaderIdentityProvider", "challengeURL": "https://www.example.com/challenging-proxy/oauth/authorize?${query}", "loginURL": "https://www.example.com/login-proxy/oauth/authorize?${query}", "clientCA": "my-request-header-ca.crt", "clientCommonNames": ["my-auth-proxy"], "headers": ["X-Remote-User", "SSO-User"], "emailHeaders": ["X-Remote-User-Email"], "nameHeaders": ["X-Remote-User-Display-Name"], "preferredUsernameHeaders": ["X-Remote-User-Login"]}] # # Configure request header CA certificate # Specify either the ASCII contents of the certificate or the path to # the local file that will be copied to the remote host. CA # certificate contents will be copied to master systems and saved # within /etc/origin/master/ with a filename matching the "clientCA" # key set within the RequestHeaderIdentityProvider. # #openshift_master_request_header_ca= # or #openshift_master_request_header_ca_file= # CloudForms Management Engine (ManageIQ) App Install # # Enables installation of MIQ server. Recommended for dedicated # clusters only. See roles/openshift_cfme/README.md for instructions # and requirements. #openshift_cfme_install_app=False # Cloud Provider Configuration # # Note: You may make use of environment variables rather than store # sensitive configuration within the ansible inventory. # For example: #openshift_cloudprovider_aws_access_key="{{ lookup('env','AWS_ACCESS_KEY_ID') }}" #openshift_cloudprovider_aws_secret_key="{{ lookup('env','AWS_SECRET_ACCESS_KEY') }}" # # AWS #openshift_cloudprovider_kind=aws # Note: IAM profiles may be used instead of storing API credentials on disk. #openshift_cloudprovider_aws_access_key=aws_access_key_id #openshift_cloudprovider_aws_secret_key=aws_secret_access_key # # Openstack #openshift_cloudprovider_kind=openstack #openshift_cloudprovider_openstack_auth_url=http://openstack.example.com:35357/v2.0/ #openshift_cloudprovider_openstack_username=username #openshift_cloudprovider_openstack_password=password #openshift_cloudprovider_openstack_domain_id=domain_id #openshift_cloudprovider_openstack_domain_name=domain_name #openshift_cloudprovider_openstack_tenant_id=tenant_id #openshift_cloudprovider_openstack_tenant_name=tenant_name #openshift_cloudprovider_openstack_region=region #openshift_cloudprovider_openstack_lb_subnet_id=subnet_id # # GCE #openshift_cloudprovider_kind=gce # Project Configuration #osm_project_request_message='' #osm_project_request_template='' #osm_mcs_allocator_range='s0:/2' #osm_mcs_labels_per_project=5 #osm_uid_allocator_range='1000000000-1999999999/10000' # Configure additional projects #openshift_additional_projects={'my-project': {'default_node_selector': 'label=value'}} # Enable cockpit #osm_use_cockpit=true # # Set cockpit plugins #osm_cockpit_plugins=['cockpit-kubernetes'] # Native high availability cluster method with optional load balancer. # If no lb group is defined, the installer assumes that a load balancer has # been preconfigured. For installation the value of # openshift_master_cluster_hostname must resolve to the load balancer # or to one or all of the masters defined in the inventory if no load # balancer is present. #openshift_master_cluster_method=native #openshift_master_cluster_hostname=openshift-ansible.test.example.com #openshift_master_cluster_public_hostname=openshift-ansible.test.example.com # Pacemaker high availability cluster method. # Pacemaker HA environment must be able to self provision the # configured VIP. For installation openshift_master_cluster_hostname # must resolve to the configured VIP. #openshift_master_cluster_method=pacemaker #openshift_master_cluster_password=openshift_cluster #openshift_master_cluster_vip=192.168.133.25 #openshift_master_cluster_public_vip=192.168.133.25 #openshift_master_cluster_hostname=openshift-ansible.test.example.com #openshift_master_cluster_public_hostname=openshift-ansible.test.example.com # Override the default controller lease ttl #osm_controller_lease_ttl=30 # Configure controller arguments #osm_controller_args={'resource-quota-sync-period': ['10s']} # Configure api server arguments #osm_api_server_args={'max-requests-inflight': ['400']} # default subdomain to use for exposed routes #openshift_master_default_subdomain=apps.test.example.com # additional cors origins #osm_custom_cors_origins=['foo.example.com', 'bar.example.com'] # default project node selector #osm_default_node_selector='region=primary' # Override the default pod eviction timeout #openshift_master_pod_eviction_timeout=5m # Override the default oauth tokenConfig settings: # openshift_master_access_token_max_seconds=86400 # openshift_master_auth_token_max_seconds=500 # Override master servingInfo.maxRequestsInFlight #openshift_master_max_requests_inflight=500 # Override master and node servingInfo.minTLSVersion and .cipherSuites # valid TLS versions are VersionTLS10, VersionTLS11, VersionTLS12 # example cipher suites override, valid cipher suites are https://golang.org/pkg/crypto/tls/#pkg-constants #openshift_master_min_tls_version=VersionTLS12 #openshift_master_cipher_suites=['TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256', '...'] # #openshift_node_min_tls_version=VersionTLS12 #openshift_node_cipher_suites=['TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256', '...'] # default storage plugin dependencies to install, by default the ceph and # glusterfs plugin dependencies will be installed, if available. #osn_storage_plugin_deps=['ceph','glusterfs'] # OpenShift Router Options # # An OpenShift router will be created during install if there are # nodes present with labels matching the default router selector, # "region=infra". Set openshift_node_labels per node as needed in # order to label nodes. # # Example: # [nodes] # node.example.com openshift_node_labels="{'region': 'infra'}" # # Router selector (optional) # Router will only be created if nodes matching this label are present. # Default value: 'region=infra' #openshift_hosted_router_selector='region=infra' # # Router replicas (optional) # Unless specified, openshift-ansible will calculate the replica count # based on the number of nodes matching the openshift router selector. #openshift_hosted_router_replicas=2 # # Router force subdomain (optional) # A router path format to force on all routes used by this router # (will ignore the route host value) #openshift_hosted_router_force_subdomain='${name}-${namespace}.apps.example.com' # # Router certificate (optional) # Provide local certificate paths which will be configured as the # router's default certificate. #openshift_hosted_router_certificate={"certfile": "/path/to/router.crt", "keyfile": "/path/to/router.key", "cafile": "/path/to/router-ca.crt"} # # Manage the OpenShift Router (optional) #openshift_hosted_manage_router=true # # Router sharding support has been added and can be achieved by supplying the correct # data to the inventory. The variable to house the data is openshift_hosted_routers # and is in the form of a list. If no data is passed then a default router will be # created. There are multiple combinations of router sharding. The one described # below supports routers on separate nodes. # #openshift_hosted_routers=[{'name': 'router1', 'certificate': {'certfile': '/path/to/certificate/abc.crt', 'keyfile': '/path/to/certificate/abc.key', 'cafile': '/path/to/certificate/ca.crt'}, 'replicas': 1, 'serviceaccount': 'router', 'namespace': 'default', 'stats_port': 1936, 'edits': [], 'images': 'openshift3/ose-${component}:${version}', 'selector': 'type=router1', 'ports': ['80:80', '443:443']}, {'name': 'router2', 'certificate': {'certfile': '/path/to/certificate/xyz.crt', 'keyfile': '/path/to/certificate/xyz.key', 'cafile': '/path/to/certificate/ca.crt'}, 'replicas': 1, 'serviceaccount': 'router', 'namespace': 'default', 'stats_port': 1936, 'edits': [{'action': 'append', 'key': 'spec.template.spec.containers[0].env', 'value': {'name': 'ROUTE_LABELS', 'value': 'route=external'}}], 'images': 'openshift3/ose-${component}:${version}', 'selector': 'type=router2', 'ports': ['80:80', '443:443']}] # OpenShift Registry Console Options # Override the console image prefix for enterprise deployments, not used in origin # default is "registry.access.redhat.com/openshift3/" and the image appended is "registry-console" #openshift_cockpit_deployer_prefix=registry.example.com/myrepo/ # Override image version, defaults to latest for origin, matches the product version for enterprise #openshift_cockpit_deployer_version=1.4.1 # Openshift Registry Options # # An OpenShift registry will be created during install if there are # nodes present with labels matching the default registry selector, # "region=infra". Set openshift_node_labels per node as needed in # order to label nodes. # # Example: # [nodes] # node.example.com openshift_node_labels="{'region': 'infra'}" # # Registry selector (optional) # Registry will only be created if nodes matching this label are present. # Default value: 'region=infra' #openshift_hosted_registry_selector='region=infra' # # Registry replicas (optional) # Unless specified, openshift-ansible will calculate the replica count # based on the number of nodes matching the openshift registry selector. #openshift_hosted_registry_replicas=2 # # Validity of the auto-generated certificate in days (optional) #openshift_hosted_registry_cert_expire_days=730 # # Manage the OpenShift Registry (optional) #openshift_hosted_manage_registry=true # Registry Storage Options # # NFS Host Group # An NFS volume will be created with path "nfs_directory/volume_name" # on the host within the [nfs] host group. For example, the volume # path using these options would be "/exports/registry" #openshift_hosted_registry_storage_kind=nfs #openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] # nfs_directory must conform to DNS-1123 subdomain must consist of lower case # alphanumeric characters, '-' or '.', and must start and end with an alphanumeric character #openshift_hosted_registry_storage_nfs_directory=/exports #openshift_hosted_registry_storage_nfs_options='*(rw,root_squash)' #openshift_hosted_registry_storage_volume_name=registry #openshift_hosted_registry_storage_volume_size=10Gi # # External NFS Host # NFS volume must already exist with path "nfs_directory/_volume_name" on # the storage_host. For example, the remote volume path using these # options would be "nfs.example.com:/exports/registry" #openshift_hosted_registry_storage_kind=nfs #openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] #openshift_hosted_registry_storage_host=nfs.example.com # nfs_directory must conform to DNS-1123 subdomain must consist of lower case # alphanumeric characters, '-' or '.', and must start and end with an alphanumeric character #openshift_hosted_registry_storage_nfs_directory=/exports #openshift_hosted_registry_storage_volume_name=registry #openshift_hosted_registry_storage_volume_size=10Gi # # Openstack # Volume must already exist. #openshift_hosted_registry_storage_kind=openstack #openshift_hosted_registry_storage_access_modes=['ReadWriteOnce'] #openshift_hosted_registry_storage_openstack_filesystem=ext4 #openshift_hosted_registry_storage_openstack_volumeID=3a650b4f-c8c5-4e0a-8ca5-eaee11f16c57 #openshift_hosted_registry_storage_volume_size=10Gi # # AWS S3 # # S3 bucket must already exist. #openshift_hosted_registry_storage_kind=object #openshift_hosted_registry_storage_provider=s3 #openshift_hosted_registry_storage_s3_encrypt=false #openshift_hosted_registry_storage_s3_kmskeyid=aws_kms_key_id #openshift_hosted_registry_storage_s3_accesskey=aws_access_key_id #openshift_hosted_registry_storage_s3_secretkey=aws_secret_access_key #openshift_hosted_registry_storage_s3_bucket=bucket_name #openshift_hosted_registry_storage_s3_region=bucket_region #openshift_hosted_registry_storage_s3_chunksize=26214400 #openshift_hosted_registry_storage_s3_rootdirectory=/registry #openshift_hosted_registry_pullthrough=true #openshift_hosted_registry_acceptschema2=true #openshift_hosted_registry_enforcequota=true # # Any S3 service (Minio, ExoScale, ...): Basically the same as above # but with regionendpoint configured # S3 bucket must already exist. #openshift_hosted_registry_storage_kind=object #openshift_hosted_registry_storage_provider=s3 #openshift_hosted_registry_storage_s3_accesskey=access_key_id #openshift_hosted_registry_storage_s3_secretkey=secret_access_key #openshift_hosted_registry_storage_s3_regionendpoint=https://myendpoint.example.com/ #openshift_hosted_registry_storage_s3_bucket=bucket_name #openshift_hosted_registry_storage_s3_region=bucket_region #openshift_hosted_registry_storage_s3_chunksize=26214400 #openshift_hosted_registry_storage_s3_rootdirectory=/registry #openshift_hosted_registry_pullthrough=true #openshift_hosted_registry_acceptschema2=true #openshift_hosted_registry_enforcequota=true # # Additional CloudFront Options. When using CloudFront all three # of the followingg variables must be defined. #openshift_hosted_registry_storage_s3_cloudfront_baseurl=https://myendpoint.cloudfront.net/ #openshift_hosted_registry_storage_s3_cloudfront_privatekeyfile=/full/path/to/secret.pem #openshift_hosted_registry_storage_s3_cloudfront_keypairid=yourpairid # Metrics deployment # See: https://docs.openshift.com/enterprise/latest/install_config/cluster_metrics.html # # By default metrics are not automatically deployed, set this to enable them #openshift_metrics_install_metrics=true # # Storage Options # If openshift_metrics_storage_kind is unset then metrics will be stored # in an EmptyDir volume and will be deleted when the cassandra pod terminates. # Storage options A & B currently support only one cassandra pod which is # generally enough for up to 1000 pods. Additional volumes can be created # manually after the fact and metrics scaled per the docs. # # Option A - NFS Host Group # An NFS volume will be created with path "nfs_directory/volume_name" # on the host within the [nfs] host group. For example, the volume # path using these options would be "/exports/metrics" #openshift_metrics_storage_kind=nfs #openshift_metrics_storage_access_modes=['ReadWriteOnce'] #openshift_metrics_storage_nfs_directory=/exports #openshift_metrics_storage_nfs_options='*(rw,root_squash)' #openshift_metrics_storage_volume_name=metrics #openshift_metrics_storage_volume_size=10Gi #openshift_metrics_storage_labels={'storage': 'metrics'} # # Option B - External NFS Host # NFS volume must already exist with path "nfs_directory/_volume_name" on # the storage_host. For example, the remote volume path using these # options would be "nfs.example.com:/exports/metrics" #openshift_metrics_storage_kind=nfs #openshift_metrics_storage_access_modes=['ReadWriteOnce'] #openshift_metrics_storage_host=nfs.example.com #openshift_metrics_storage_nfs_directory=/exports #openshift_metrics_storage_volume_name=metrics #openshift_metrics_storage_volume_size=10Gi #openshift_metrics_storage_labels={'storage': 'metrics'} # # Option C - Dynamic -- If openshift supports dynamic volume provisioning for # your cloud platform use this. #openshift_metrics_storage_kind=dynamic # # Other Metrics Options -- Common items you may wish to reconfigure, for the complete # list of options please see roles/openshift_metrics/README.md # # Override metricsPublicURL in the master config for cluster metrics # Defaults to https://hawkular-metrics.{{openshift_master_default_subdomain}}/hawkular/metrics # Currently, you may only alter the hostname portion of the url, alterting the # `/hawkular/metrics` path will break installation of metrics. #openshift_metrics_hawkular_hostname=hawkular-metrics.example.com # Configure the prefix and version for the component images #openshift_metrics_image_prefix=registry.example.com:8888/openshift3/ #openshift_metrics_image_version=3.7.0 # # StorageClass # openshift_storageclass_name=gp2 # openshift_storageclass_parameters={'type': 'gp2', 'encrypted': 'false'} # # Logging deployment # # Currently logging deployment is disabled by default, enable it by setting this #openshift_logging_install_logging=true # # Logging storage config # Option A - NFS Host Group # An NFS volume will be created with path "nfs_directory/volume_name" # on the host within the [nfs] host group. For example, the volume # path using these options would be "/exports/logging" #openshift_logging_storage_kind=nfs #openshift_logging_storage_access_modes=['ReadWriteOnce'] #openshift_logging_storage_nfs_directory=/exports #openshift_logging_storage_nfs_options='*(rw,root_squash)' #openshift_logging_storage_volume_name=logging #openshift_logging_storage_volume_size=10Gi #openshift_logging_storage_labels={'storage': 'logging'} # # Option B - External NFS Host # NFS volume must already exist with path "nfs_directory/_volume_name" on # the storage_host. For example, the remote volume path using these # options would be "nfs.example.com:/exports/logging" #openshift_logging_storage_kind=nfs #openshift_logging_storage_access_modes=['ReadWriteOnce'] #openshift_logging_storage_host=nfs.example.com #openshift_logging_storage_nfs_directory=/exports #openshift_logging_storage_volume_name=logging #openshift_logging_storage_volume_size=10Gi #openshift_logging_storage_labels={'storage': 'logging'} # # Option C - Dynamic -- If openshift supports dynamic volume provisioning for # your cloud platform use this. #openshift_logging_storage_kind=dynamic # # Option D - none -- Logging will use emptydir volumes which are destroyed when # pods are deleted # # Other Logging Options -- Common items you may wish to reconfigure, for the complete # list of options please see roles/openshift_logging/README.md # # Configure loggingPublicURL in the master config for aggregate logging, defaults # to kibana.{{ openshift_master_default_subdomain }} #openshift_logging_kibana_hostname=logging.apps.example.com # Configure the number of elastic search nodes, unless you're using dynamic provisioning # this value must be 1 #openshift_logging_es_cluster_size=1 # Configure the prefix and version for the component images #openshift_logging_image_prefix=registry.example.com:8888/openshift3/ #openshift_logging_image_version=3.7.0 # Configure the multi-tenant SDN plugin (default is 'redhat/openshift-ovs-subnet') # os_sdn_network_plugin_name='redhat/openshift-ovs-multitenant' # Disable the OpenShift SDN plugin # openshift_use_openshift_sdn=False # Configure SDN cluster network and kubernetes service CIDR blocks. These # network blocks should be private and should not conflict with network blocks # in your infrastructure that pods may require access to. Can not be changed # after deployment. # # WARNING : Do not pick subnets that overlap with the default Docker bridge subnet of # 172.17.0.0/16. Your installation will fail and/or your configuration change will # cause the Pod SDN or Cluster SDN to fail. # # WORKAROUND : If you must use an overlapping subnet, you can configure a non conflicting # docker0 CIDR range by adding '--bip=192.168.2.1/24' to DOCKER_NETWORK_OPTIONS # environment variable located in /etc/sysconfig/docker-network. # When upgrading or scaling up the following must match whats in your master config! # Inventory: master yaml field # osm_cluster_network_cidr: clusterNetworkCIDR # openshift_portal_net: serviceNetworkCIDR # When installing osm_cluster_network_cidr and openshift_portal_net must be set. # Sane examples are provided below. #osm_cluster_network_cidr=10.128.0.0/14 #openshift_portal_net=172.30.0.0/16 # ExternalIPNetworkCIDRs controls what values are acceptable for the # service external IP field. If empty, no externalIP may be set. It # may contain a list of CIDRs which are checked for access. If a CIDR # is prefixed with !, IPs in that CIDR will be rejected. Rejections # will be applied first, then the IP checked against one of the # allowed CIDRs. You should ensure this range does not overlap with # your nodes, pods, or service CIDRs for security reasons. #openshift_master_external_ip_network_cidrs=['0.0.0.0/0'] # IngressIPNetworkCIDR controls the range to assign ingress IPs from for # services of type LoadBalancer on bare metal. If empty, ingress IPs will not # be assigned. It may contain a single CIDR that will be allocated from. For # security reasons, you should ensure that this range does not overlap with # the CIDRs reserved for external IPs, nodes, pods, or services. #openshift_master_ingress_ip_network_cidr=172.46.0.0/16 # Configure number of bits to allocate to each host's subnet e.g. 9 # would mean a /23 network on the host. # When upgrading or scaling up the following must match whats in your master config! # Inventory: master yaml field # osm_host_subnet_length: hostSubnetLength # When installing osm_host_subnet_length must be set. A sane example is provided below. #osm_host_subnet_length=9 # Configure master API and console ports. #openshift_master_api_port=8443 #openshift_master_console_port=8443 # set RPM version for debugging purposes #openshift_pkg_version=-3.1.0.0 # Configure custom ca certificate #openshift_master_ca_certificate={'certfile': '/path/to/ca.crt', 'keyfile': '/path/to/ca.key'} # # NOTE: CA certificate will not be replaced with existing clusters. # This option may only be specified when creating a new cluster or # when redeploying cluster certificates with the redeploy-certificates # playbook. # Configure custom named certificates (SNI certificates) # # https://docs.openshift.com/enterprise/latest/install_config/certificate_customization.html # # NOTE: openshift_master_named_certificates is cached on masters and is an # additive fact, meaning that each run with a different set of certificates # will add the newly provided certificates to the cached set of certificates. # # An optional CA may be specified for each named certificate. CAs will # be added to the OpenShift CA bundle which allows for the named # certificate to be served for internal cluster communication. # # If you would like openshift_master_named_certificates to be overwritten with # the provided value, specify openshift_master_overwrite_named_certificates. #openshift_master_overwrite_named_certificates=true # # Provide local certificate paths which will be deployed to masters #openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "cafile": "/path/to/custom-ca1.crt"}] # # Detected names may be overridden by specifying the "names" key #openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "names": ["public-master-host.com"], "cafile": "/path/to/custom-ca1.crt"}] # Session options #openshift_master_session_name=ssn #openshift_master_session_max_seconds=3600 # An authentication and encryption secret will be generated if secrets # are not provided. If provided, openshift_master_session_auth_secrets # and openshift_master_encryption_secrets must be equal length. # # Signing secrets, used to authenticate sessions using # HMAC. Recommended to use secrets with 32 or 64 bytes. #openshift_master_session_auth_secrets=['DONT+USE+THIS+SECRET+b4NV+pmZNSO'] # # Encrypting secrets, used to encrypt sessions. Must be 16, 24, or 32 # characters long, to select AES-128, AES-192, or AES-256. #openshift_master_session_encryption_secrets=['DONT+USE+THIS+SECRET+b4NV+pmZNSO'] # configure how often node iptables rules are refreshed #openshift_node_iptables_sync_period=5s # Configure nodeIP in the node config # This is needed in cases where node traffic is desired to go over an # interface other than the default network interface. #openshift_set_node_ip=True # Configure dnsIP in the node config #openshift_dns_ip=172.30.0.1 # Configure node kubelet arguments. pods-per-core is valid in OpenShift Origin 1.3 or OpenShift Container Platform 3.3 and later. #openshift_node_kubelet_args={'pods-per-core': ['10'], 'max-pods': ['250'], 'image-gc-high-threshold': ['85'], 'image-gc-low-threshold': ['80']} # Configure logrotate scripts # See: https://github.com/nickhammond/ansible-logrotate #logrotate_scripts=[{"name": "syslog", "path": "/var/log/cron\n/var/log/maillog\n/var/log/messages\n/var/log/secure\n/var/log/spooler\n", "options": ["daily", "rotate 7", "compress", "sharedscripts", "missingok"], "scripts": {"postrotate": "/bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true"}}] # openshift-ansible will wait indefinitely for your input when it detects that the # value of openshift_hostname resolves to an IP address not bound to any local # interfaces. This mis-configuration is problematic for any pod leveraging host # networking and liveness or readiness probes. # Setting this variable to true will override that check. #openshift_override_hostname_check=true # openshift_use_dnsmasq is deprecated. This must be true, or installs will fail # in versions >= 3.6 #openshift_use_dnsmasq=False # Define an additional dnsmasq.conf file to deploy to /etc/dnsmasq.d/openshift-ansible.conf # This is useful for POC environments where DNS may not actually be available yet or to set # options like 'strict-order' to alter dnsmasq configuration. #openshift_node_dnsmasq_additional_config_file=/home/bob/ose-dnsmasq.conf # Global Proxy Configuration # These options configure HTTP_PROXY, HTTPS_PROXY, and NOPROXY environment # variables for docker and master services. # # Hosts in the openshift_no_proxy list will NOT use any globally # configured HTTP(S)_PROXYs. openshift_no_proxy accepts domains # (.example.com), hosts (example.com), and IP addresses. #openshift_http_proxy=http://USER:PASSWORD@IPADDR:PORT #openshift_https_proxy=https://USER:PASSWORD@IPADDR:PORT #openshift_no_proxy='.hosts.example.com,some-host.com' # # Most environments don't require a proxy between openshift masters, nodes, and # etcd hosts. So automatically add those hostnames to the openshift_no_proxy list. # If all of your hosts share a common domain you may wish to disable this and # specify that domain above instead. # # For example, having hosts with FQDNs: m1.ex.com, n1.ex.com, and # n2.ex.com, one would simply add '.ex.com' to the openshift_no_proxy # variable (above) and set this value to False #openshift_generate_no_proxy_hosts=True # # These options configure the BuildDefaults admission controller which injects # configuration into Builds. Proxy related values will default to the global proxy # config values. You only need to set these if they differ from the global proxy settings. # See BuildDefaults documentation at # https://docs.openshift.org/latest/admin_guide/build_defaults_overrides.html #openshift_builddefaults_http_proxy=http://USER:PASSWORD@HOST:PORT #openshift_builddefaults_https_proxy=https://USER:PASSWORD@HOST:PORT #openshift_builddefaults_no_proxy=mycorp.com #openshift_builddefaults_git_http_proxy=http://USER:PASSWORD@HOST:PORT #openshift_builddefaults_git_https_proxy=https://USER:PASSWORD@HOST:PORT #openshift_builddefaults_git_no_proxy=mycorp.com #openshift_builddefaults_image_labels=[{'name':'imagelabelname1','value':'imagelabelvalue1'}] #openshift_builddefaults_nodeselectors={'nodelabel1':'nodelabelvalue1'} #openshift_builddefaults_annotations={'annotationkey1':'annotationvalue1'} #openshift_builddefaults_resources_requests_cpu=100m #openshift_builddefaults_resources_requests_memory=256Mi #openshift_builddefaults_resources_limits_cpu=1000m #openshift_builddefaults_resources_limits_memory=512Mi # Or you may optionally define your own build defaults configuration serialized as json #openshift_builddefaults_json='{"BuildDefaults":{"configuration":{"apiVersion":"v1","env":[{"name":"HTTP_PROXY","value":"http://proxy.example.com.redhat.com:3128"},{"name":"NO_PROXY","value":"ose3-master.example.com"}],"gitHTTPProxy":"http://proxy.example.com:3128","gitNoProxy":"ose3-master.example.com","kind":"BuildDefaultsConfig"}}}' # These options configure the BuildOverrides admission controller which injects # configuration into Builds. # See BuildOverrides documentation at # https://docs.openshift.org/latest/admin_guide/build_defaults_overrides.html #openshift_buildoverrides_force_pull=true #openshift_buildoverrides_image_labels=[{'name':'imagelabelname1','value':'imagelabelvalue1'}] #openshift_buildoverrides_nodeselectors={'nodelabel1':'nodelabelvalue1'} #openshift_buildoverrides_annotations={'annotationkey1':'annotationvalue1'} # Or you may optionally define your own build overrides configuration serialized as json #openshift_buildoverrides_json='{"BuildOverrides":{"configuration":{"apiVersion":"v1","kind":"BuildDefaultsConfig","forcePull":"true"}}}' # Enable template service broker by specifying one of more namespaces whose # templates will be served by the broker #openshift_template_service_broker_namespaces=['openshift'] # masterConfig.volumeConfig.dynamicProvisioningEnabled, configurable as of 1.2/3.2, enabled by default #openshift_master_dynamic_provisioning_enabled=False # Admission plugin config #openshift_master_admission_plugin_config={"ProjectRequestLimit":{"configuration":{"apiVersion":"v1","kind":"ProjectRequestLimitConfig","limits":[{"selector":{"admin":"true"}},{"maxProjects":"1"}]}},"PodNodeConstraints":{"configuration":{"apiVersion":"v1","kind":"PodNodeConstraintsConfig"}}} # Configure usage of openshift_clock role. #openshift_clock_enabled=true # OpenShift Per-Service Environment Variables # Environment variables are added to /etc/sysconfig files for # each OpenShift service: node, master (api and controllers). # API and controllers environment variables are merged in single # master environments. #openshift_master_api_env_vars={"ENABLE_HTTP2": "true"} #openshift_master_controllers_env_vars={"ENABLE_HTTP2": "true"} #openshift_node_env_vars={"ENABLE_HTTP2": "true"} # Enable API service auditing, available as of 3.2 #openshift_master_audit_config={"enabled": true} # # In case you want more advanced setup for the auditlog you can # use this line. # The directory in "auditFilePath" will be created if it's not # exist #openshift_master_audit_config={"enabled": true, "auditFilePath": "/var/log/openpaas-oscp-audit/openpaas-oscp-audit.log", "maximumFileRetentionDays": 14, "maximumFileSizeMegabytes": 500, "maximumRetainedFiles": 5} # Validity of the auto-generated OpenShift certificates in days. # See also openshift_hosted_registry_cert_expire_days above. # #openshift_ca_cert_expire_days=1825 #openshift_node_cert_expire_days=730 #openshift_master_cert_expire_days=730 # Validity of the auto-generated external etcd certificates in days. # Controls validity for etcd CA, peer, server and client certificates. # #etcd_ca_default_days=1825 # # ServiceAccountConfig:LimitSecretRefences rejects pods that reference secrets their service accounts do not reference # openshift_master_saconfig_limitsecretreferences=false # Upgrade Control # # By default nodes are upgraded in a serial manner one at a time and all failures # are fatal, one set of variables for normal nodes, one set of variables for # nodes that are part of control plane as the number of hosts may be different # in those two groups. #openshift_upgrade_nodes_serial=1 #openshift_upgrade_nodes_max_fail_percentage=0 #openshift_upgrade_control_plane_nodes_serial=1 #openshift_upgrade_control_plane_nodes_max_fail_percentage=0 # # You can specify the number of nodes to upgrade at once. We do not currently # attempt to verify that you have capacity to drain this many nodes at once # so please be careful when specifying these values. You should also verify that # the expected number of nodes are all schedulable and ready before starting an # upgrade. If it's not possible to drain the requested nodes the upgrade will # stall indefinitely until the drain is successful. # # If you're upgrading more than one node at a time you can specify the maximum # percentage of failure within the batch before the upgrade is aborted. Any # nodes that do fail are ignored for the rest of the playbook run and you should # take care to investigate the failure and return the node to service so that # your cluster. # # The percentage must exceed the value, this would fail on two failures # openshift_upgrade_nodes_serial=4 openshift_upgrade_nodes_max_fail_percentage=49 # where as this would not # openshift_upgrade_nodes_serial=4 openshift_upgrade_nodes_max_fail_percentage=50 # # Multiple data migrations take place and if they fail they will fail the upgrade # You may wish to disable these or make them non fatal # # openshift_upgrade_pre_storage_migration_enabled=true # openshift_upgrade_pre_storage_migration_fatal==true # openshift_upgrade_post_storage_migration_enabled=true # openshift_upgrade_post_storage_migration_fatal==false # host group for masters [masters] ose3-master[1:3]-ansible.test.example.com [etcd] ose3-etcd[1:3]-ansible.test.example.com # NOTE: Containerized load balancer hosts are not yet supported, if using a global # containerized=true host variable we must set to false. [lb] ose3-lb-ansible.test.example.com containerized=false # NOTE: Currently we require that masters be part of the SDN which requires that they also be nodes # However, in order to ensure that your masters are not burdened with running pods you should # make them unschedulable by adding openshift_schedulable=False any node that's also a master. [nodes] ose3-master[1:3]-ansible.test.example.com ose3-node[1:2]-ansible.test.example.com openshift_node_labels="{'region': 'primary', 'zone': 'default'}" # CloudForms/ManageIQ (CFME/MIQ) Configuration # See the readme for full descriptions and getting started # instructions: ../../roles/openshift_cfme/README.md or go directly to # their definitions: ../../roles/openshift_cfme/defaults/main.yml # ../../roles/openshift_cfme/vars/main.yml # # Namespace for the CFME project #openshift_cfme_project: openshift-cfme # Namespace/project description #openshift_cfme_project_description: CloudForms Management Engine # Choose 'miq-template' for a podified database install # Choose 'miq-template-ext-db' for an external database install # # If you are using the miq-template-ext-db template then you must add # the required database parameters to the # openshift_cfme_template_parameters variable. #openshift_cfme_app_template: miq-template # Allowed options: nfs, nfs_external, preconfigured, cloudprovider. #openshift_cfme_storage_class: nfs # [OPTIONAL] - If you are using an EXTERNAL NFS server, such as a # netapp appliance, then you must set the hostname here. Leave the # value as 'false' if you are not using external NFS. #openshift_cfme_storage_nfs_external_hostname: false # [OPTIONAL] - If you are using external NFS then you must set the base # path to the exports location here. # # Additionally: EXTERNAL NFS REQUIRES that YOU CREATE the nfs exports # that will back the application PV and optionally the database # pv. Export path definitions, relative to # {{ openshift_cfme_storage_nfs_base_dir }} # # LOCAL NFS NOTE: # # You may may also change this value if you want to change the default # path used for local NFS exports. #openshift_cfme_storage_nfs_base_dir: /exports # LOCAL NFS NOTE: # # You may override the automatically selected LOCAL NFS server by # setting this variable. Useful for testing specific task files. #openshift_cfme_storage_nfs_local_hostname: false # A hash of parameters you want to override or set in the # miq-template.yaml or miq-template-ext-db.yaml templates. Set this in # your inventory file as a simple hash. Acceptable values are defined # under the .parameters list in files/miq-template{-ext-db}.yaml # Example: # # openshift_cfme_template_parameters={'APPLICATION_MEM_REQ': '512Mi'} #openshift_cfme_template_parameters: {}