diff options
Diffstat (limited to 'roles/kuryr')
| -rw-r--r-- | roles/kuryr/README.md | 38 | ||||
| -rw-r--r-- | roles/kuryr/defaults/main.yaml | 72 | ||||
| -rw-r--r-- | roles/kuryr/meta/main.yml | 17 | ||||
| -rw-r--r-- | roles/kuryr/tasks/master.yaml | 52 | ||||
| -rw-r--r-- | roles/kuryr/tasks/node.yaml | 48 | ||||
| -rw-r--r-- | roles/kuryr/tasks/serviceaccount.yaml | 31 | ||||
| -rw-r--r-- | roles/kuryr/templates/cni-daemonset.yaml.j2 | 53 | ||||
| -rw-r--r-- | roles/kuryr/templates/configmap.yaml.j2 | 343 | ||||
| -rw-r--r-- | roles/kuryr/templates/controller-deployment.yaml.j2 | 40 |
9 files changed, 694 insertions, 0 deletions
diff --git a/roles/kuryr/README.md b/roles/kuryr/README.md new file mode 100644 index 000000000..7b618f902 --- /dev/null +++ b/roles/kuryr/README.md @@ -0,0 +1,38 @@ +## OpenStack Kuryr + +Install Kuryr CNI components (kuryr-controller, kuryr-cni) on Master and worker +nodes. Kuryr uses OpenStack Networking service (Neutron) to provide network for +pods. This allows to have interconnectivity between pods and OpenStack VMs. + +## Requirements + +* Ansible 2.2+ +* Centos/ RHEL 7.3+ + +## Current Kuryr restrictions when used with OpenShift + +* Openshift Origin only +* OpenShift on OpenStack Newton or newer (only with Trunk ports) + +## Key Ansible inventory Kuryr master configuration parameters + +* ``openshift_use_kuryr=True`` +* ``openshift_use_openshift_sdn=False`` +* ``openshift_sdn_network_plugin_name='cni'`` +* ``kuryr_cni_link_interface=eth0`` +* ``kuryr_openstack_auth_url=keystone_url`` +* ``kuryr_openstack_user_domain_name=Default`` +* ``kuryr_openstack_user_project_name=Default`` +* ``kuryr_openstack_project_id=project_uuid`` +* ``kuryr_openstack_username=kuryr`` +* ``kuryr_openstack_password=kuryr_pass`` +* ``kuryr_openstack_pod_sg_id=pod_security_group_uuid`` +* ``kuryr_openstack_pod_subnet_id=pod_subnet_uuid`` +* ``kuryr_openstack_pod_service_id=service_subnet_uuid`` +* ``kuryr_openstack_pod_project_id=pod_project_uuid`` +* ``kuryr_openstack_worker_nodes_subnet_id=worker_nodes_subnet_uuid`` + +## Kuryr resources + +* [Kuryr documentation](https://docs.openstack.org/kuryr-kubernetes/latest/) +* [Installing Kuryr containerized](https://docs.openstack.org/kuryr-kubernetes/latest/installation/containerized.html) diff --git a/roles/kuryr/defaults/main.yaml b/roles/kuryr/defaults/main.yaml new file mode 100644 index 000000000..ff298dda0 --- /dev/null +++ b/roles/kuryr/defaults/main.yaml @@ -0,0 +1,72 @@ +--- +# Kuryr conf directory +kuryr_config_dir: /etc/kuryr + +# Kuryr username +kuryr_openstack_username: kuryr + +# Kuryr username domain +kuryr_openstack_user_domain_name: default + +# Kuryr username domain +kuryr_openstack_project_domain_name: default + +# Kuryr OpenShift namespace +kuryr_namespace: kube-system + +# Whether to run the cni plugin in debug mode +kuryr_cni_debug: "false" + +# The version of cni binaries +cni_version: v0.5.2 + +# Path to bin dir (where kuryr execs get installed) +bin_dir: /usr/bin + +# Path to the cni binaries +cni_bin_dir: /opt/cni/bin + +# URL for cni binaries +cni_bin_url_base: "https://github.com/containernetworking/cni/releases/download/" +cni_bin_url: "{{ cni_bin_url_base }}/{{ cni_version }}/cni-{{ cni_version }}.tgz" +cni_bin_checksum: "71f411080245aa14d0cc06f6824e8039607dd9e9" + +# Kuryr ClusterRole definiton +kuryr_clusterrole: + name: kuryrctl + state: present + rules: + - apiGroups: + - "" + attributeRestrictions: null + verbs: + - get + - list + - watch + resources: + - daemonsets + - deployments + - deploymentconfigs + - endpoints + - ingress + - nodes + - namespaces + - pods + - projects + - routes + - services + - apiGroups: + - "" + attributeRestrictions: null + verbs: + - update + - patch + resources: + - endpoints + - ingress + - pods + - namespaces + - nodes + - services + - services/status + - routes diff --git a/roles/kuryr/meta/main.yml b/roles/kuryr/meta/main.yml new file mode 100644 index 000000000..7fd5adf41 --- /dev/null +++ b/roles/kuryr/meta/main.yml @@ -0,0 +1,17 @@ +--- +galaxy_info: + author: Red Hat + description: Kuryr networking + company: Red Hat + license: Apache License, Version 2.0 + min_ansible_version: 2.2 + platforms: + - name: EL + versions: + - 7 + categories: + - cloud + - system +dependencies: +- { role: lib_openshift } +- { role: openshift_facts } diff --git a/roles/kuryr/tasks/master.yaml b/roles/kuryr/tasks/master.yaml new file mode 100644 index 000000000..55ab16f74 --- /dev/null +++ b/roles/kuryr/tasks/master.yaml @@ -0,0 +1,52 @@ +--- +- name: Perform OpenShit ServiceAccount config + include: serviceaccount.yaml + +- name: Create kuryr manifests tempdir + command: mktemp -d + register: manifests_tmpdir + +- name: Create kuryr ConfigMap manifest + become: yes + template: + src: configmap.yaml.j2 + dest: "{{ manifests_tmpdir.stdout }}/configmap.yaml" + +- name: Create kuryr-controller Deployment manifest + become: yes + template: + src: controller-deployment.yaml.j2 + dest: "{{ manifests_tmpdir.stdout }}/controller-deployment.yaml" + +- name: Create kuryr-cni DaemonSet manifest + become: yes + template: + src: cni-daemonset.yaml.j2 + dest: "{{ manifests_tmpdir.stdout }}/cni-daemonset.yaml" + +- name: Apply ConfigMap manifest + oc_obj: + state: present + kind: ConfigMap + name: "kuryr-config" + namespace: "{{ kuryr_namespace }}" + files: + - "{{ manifests_tmpdir.stdout }}/configmap.yaml" + +- name: Apply Controller Deployment manifest + oc_obj: + state: present + kind: Deployment + name: "kuryr-controller" + namespace: "{{ kuryr_namespace }}" + files: + - "{{ manifests_tmpdir.stdout }}/controller-deployment.yaml" + +- name: Apply kuryr-cni DaemonSet manifest + oc_obj: + state: present + kind: DaemonSet + name: "kuryr-cni-ds" + namespace: "{{ kuryr_namespace }}" + files: + - "{{ manifests_tmpdir.stdout }}/cni-daemonset.yaml" diff --git a/roles/kuryr/tasks/node.yaml b/roles/kuryr/tasks/node.yaml new file mode 100644 index 000000000..ffe814713 --- /dev/null +++ b/roles/kuryr/tasks/node.yaml @@ -0,0 +1,48 @@ +--- +- name: Create CNI bin directory + file: + state: directory + path: "{{ cni_bin_dir }}" + mode: 0755 + owner: root + group: root + recurse: yes + +- name: Create CNI extraction tempdir + command: mktemp -d + register: cni_tmpdir + +- name: Download CNI + get_url: + url: "{{ cni_bin_url }}" + checksum: "sha1:{{ cni_bin_checksum }}" + mode: 0644 + dest: "{{ cni_tmpdir.stdout }}" + register: downloaded_tarball + +- name: Extract CNI + become: yes + unarchive: + remote_src: True + src: "{{ downloaded_tarball.dest }}" + dest: "{{ cni_bin_dir }}" + when: downloaded_tarball.changed + +- name: Ensure CNI net.d exists + file: + path: /etc/cni/net.d + recurse: yes + state: directory + +- name: Configure OpenShift node with disabled service proxy + lineinfile: + dest: "/etc/sysconfig/{{ openshift.common.service_type }}-node" + regexp: '^OPTIONS="?(.*?)"?$' + backrefs: yes + backup: yes + line: 'OPTIONS="\1 --disable dns,proxy,plugins"' + +- name: force node restart to disable the proxy + service: + name: "{{ openshift.common.service_type }}-node" + state: restarted diff --git a/roles/kuryr/tasks/serviceaccount.yaml b/roles/kuryr/tasks/serviceaccount.yaml new file mode 100644 index 000000000..088f13091 --- /dev/null +++ b/roles/kuryr/tasks/serviceaccount.yaml @@ -0,0 +1,31 @@ +--- +- name: Create Controller service account + oc_serviceaccount: + name: kuryr-controller + namespace: "{{ kuryr_namespace }}" + register: saout + +- name: Create a role for the Kuryr + oc_clusterrole: "{{ kuryr_clusterrole }}" + +- name: Fetch the created Kuryr controller cluster role + oc_clusterrole: + name: kuryrctl + state: list + register: crout + +- name: Grant Kuryr the privileged security context constraints + oc_adm_policy_user: + user: "system:serviceaccount:{{ kuryr_namespace }}:{{ saout.results.results.0.metadata.name }}" + namespace: "{{ kuryr_namespace }}" + resource_kind: scc + resource_name: privileged + state: present + +- name: Assign role to Kuryr service account + oc_adm_policy_user: + user: "system:serviceaccount:{{ kuryr_namespace }}:{{ saout.results.results.0.metadata.name }}" + namespace: "{{ kuryr_namespace }}" + resource_kind: cluster-role + resource_name: "{{ crout.results.results.metadata.name }}" + state: present diff --git a/roles/kuryr/templates/cni-daemonset.yaml.j2 b/roles/kuryr/templates/cni-daemonset.yaml.j2 new file mode 100644 index 000000000..39348ae90 --- /dev/null +++ b/roles/kuryr/templates/cni-daemonset.yaml.j2 @@ -0,0 +1,53 @@ +# More info about the template: https://docs.openstack.org/kuryr-kubernetes/latest/installation/containerized.html#generating-kuryr-resource-definitions-for-kubernetes + +apiVersion: extensions/v1beta1 +kind: DaemonSet +metadata: + name: kuryr-cni-ds + namespace: {{ kuryr_namespace }} + labels: + tier: node + app: kuryr +spec: + template: + metadata: + labels: + tier: node + app: kuryr + spec: + hostNetwork: true + tolerations: + - key: node-role.kubernetes.io/master + operator: Exists + effect: NoSchedule + serviceAccountName: kuryr-controller + containers: + - name: kuryr-cni + image: kuryr/cni:latest + imagePullPolicy: IfNotPresent + command: [ "cni_ds_init" ] + securityContext: + privileged: true + volumeMounts: + - name: bin + mountPath: /opt/cni/bin + - name: net-conf + mountPath: /etc/cni/net.d + - name: config-volume + mountPath: /tmp/kuryr/kuryr.conf + subPath: kuryr-cni.conf + - name: etc + mountPath: /etc + volumes: + - name: bin + hostPath: + path: {{ cni_bin_dir }} + - name: net-conf + hostPath: + path: /etc/cni/net.d + - name: config-volume + configMap: + name: kuryr-config + - name: etc + hostPath: + path: /etc
\ No newline at end of file diff --git a/roles/kuryr/templates/configmap.yaml.j2 b/roles/kuryr/templates/configmap.yaml.j2 new file mode 100644 index 000000000..e874d6c25 --- /dev/null +++ b/roles/kuryr/templates/configmap.yaml.j2 @@ -0,0 +1,343 @@ +# More info about the template: https://docs.openstack.org/kuryr-kubernetes/latest/installation/containerized.html#generating-kuryr-resource-definitions-for-kubernetes + +apiVersion: v1 +kind: ConfigMap +metadata: + name: kuryr-config + namespace: {{ kuryr_namespace }} +data: + kuryr.conf: |+ + [DEFAULT] + + # + # From kuryr_kubernetes + # + + # Directory for Kuryr vif binding executables. (string value) + #bindir = /usr/libexec/kuryr + + # If set to true, the logging level will be set to DEBUG instead of the default + # INFO level. (boolean value) + # Note: This option can be changed without restarting. + #debug = false + + # DEPRECATED: If set to false, the logging level will be set to WARNING instead + # of the default INFO level. (boolean value) + # This option is deprecated for removal. + # Its value may be silently ignored in the future. + #verbose = true + + # The name of a logging configuration file. This file is appended to any + # existing logging configuration files. For details about logging configuration + # files, see the Python logging module documentation. Note that when logging + # configuration files are used then all logging configuration is set in the + # configuration file and other logging configuration options are ignored (for + # example, logging_context_format_string). (string value) + # Note: This option can be changed without restarting. + # Deprecated group/name - [DEFAULT]/log_config + #log_config_append = <None> + + # Defines the format string for %%(asctime)s in log records. Default: + # %(default)s . This option is ignored if log_config_append is set. (string + # value) + #log_date_format = %Y-%m-%d %H:%M:%S + + # (Optional) Name of log file to send logging output to. If no default is set, + # logging will go to stderr as defined by use_stderr. This option is ignored if + # log_config_append is set. (string value) + # Deprecated group/name - [DEFAULT]/logfile + #log_file = /var/log/kuryr/kuryr-controller.log + + # (Optional) The base directory used for relative log_file paths. This option + # is ignored if log_config_append is set. (string value) + # Deprecated group/name - [DEFAULT]/logdir + #log_dir = <None> + + # Uses logging handler designed to watch file system. When log file is moved or + # removed this handler will open a new log file with specified path + # instantaneously. It makes sense only if log_file option is specified and + # Linux platform is used. This option is ignored if log_config_append is set. + # (boolean value) + #watch_log_file = false + + # Use syslog for logging. Existing syslog format is DEPRECATED and will be + # changed later to honor RFC5424. This option is ignored if log_config_append + # is set. (boolean value) + #use_syslog = false + + # Syslog facility to receive log lines. This option is ignored if + # log_config_append is set. (string value) + #syslog_log_facility = LOG_USER + + # Log output to standard error. This option is ignored if log_config_append is + # set. (boolean value) + #use_stderr = true + + # Format string to use for log messages with context. (string value) + #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s + + # Format string to use for log messages when context is undefined. (string + # value) + #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s + + # Additional data to append to log message when logging level for the message + # is DEBUG. (string value) + #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d + + # Prefix each line of exception output with this format. (string value) + #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s + + # Defines the format string for %(user_identity)s that is used in + # logging_context_format_string. (string value) + #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s + + # List of package logging levels in logger=LEVEL pairs. This option is ignored + # if log_config_append is set. (list value) + #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO + + # Enables or disables publication of error events. (boolean value) + #publish_errors = false + + # The format for an instance that is passed with the log message. (string + # value) + #instance_format = "[instance: %(uuid)s] " + + # The format for an instance UUID that is passed with the log message. (string + # value) + #instance_uuid_format = "[instance: %(uuid)s] " + + # Enables or disables fatal status of deprecations. (boolean value) + #fatal_deprecations = false + + + [binding] + + driver = kuryr.lib.binding.drivers.vlan + link_iface = eth0 + + [kubernetes] + + # + # From kuryr_kubernetes + # + + # The root URL of the Kubernetes API (string value) + api_root = {{ openshift.master.api_url }} + + # Absolute path to client cert to connect to HTTPS K8S_API (string value) + # ssl_client_crt_file = /etc/kuryr/controller.crt + + # Absolute path client key file to connect to HTTPS K8S_API (string value) + # ssl_client_key_file = /etc/kuryr/controller.key + + # Absolute path to ca cert file to connect to HTTPS K8S_API (string value) + ssl_ca_crt_file = /var/run/secrets/kubernetes.io/serviceaccount/ca.crt + + # The token to talk to the k8s API + token_file = /var/run/secrets/kubernetes.io/serviceaccount/token + + # HTTPS K8S_API server identity verification (boolean value) + # TODO (apuimedo): Make configurable + ssl_verify_server_crt = True + + # The driver to determine OpenStack project for pod ports (string value) + pod_project_driver = default + + # The driver to determine OpenStack project for services (string value) + service_project_driver = default + + # The driver to determine Neutron subnets for pod ports (string value) + pod_subnets_driver = default + + # The driver to determine Neutron subnets for services (string value) + service_subnets_driver = default + + # The driver to determine Neutron security groups for pods (string value) + pod_security_groups_driver = default + + # The driver to determine Neutron security groups for services (string value) + service_security_groups_driver = default + + # The driver that provides VIFs for Kubernetes Pods. (string value) + pod_vif_driver = nested-vlan + + + [neutron] + # Configuration options for OpenStack Neutron + + # + # From kuryr_kubernetes + # + + # Authentication URL (string value) + auth_url = {{ kuryr_openstack_auth_url }} + + # Authentication type to load (string value) + # Deprecated group/name - [neutron]/auth_plugin + auth_type = password + + # Domain ID to scope to (string value) + user_domain_name = {{ kuryr_openstack_user_domain_name }} + + # User's password (string value) + password = {{ kuryr_openstack_password }} + + # Domain name containing project (string value) + project_domain_name = {{ kuryr_openstack_project_domain_name }} + + # Project ID to scope to (string value) + # Deprecated group/name - [neutron]/tenant-id + project_id = {{ kuryr_openstack_project_id }} + + # Token (string value) + #token = <None> + + # Trust ID (string value) + #trust_id = <None> + + # User's domain id (string value) + #user_domain_id = <None> + + # User id (string value) + #user_id = <None> + + # Username (string value) + # Deprecated group/name - [neutron]/user-name + username = {{kuryr_openstack_username }} + + # Whether a plugging operation is failed if the port to plug does not become + # active (boolean value) + #vif_plugging_is_fatal = false + + # Seconds to wait for port to become active (integer value) + #vif_plugging_timeout = 0 + + [neutron_defaults] + + pod_security_groups = {{ kuryr_openstack_pod_sg_id }} + pod_subnet = {{ kuryr_openstack_pod_subnet_id }} + service_subnet = {{ kuryr_openstack_service_subnet_id }} + project = {{ kuryr_openstack_pod_project_id }} + # TODO (apuimedo): Remove the duplicated line just after this one once the + # RDO packaging contains the upstream patch + worker_nodes_subnet = {{ kuryr_openstack_worker_nodes_subnet_id }} + + [pod_vif_nested] + worker_nodes_subnet = {{ kuryr_openstack_worker_nodes_subnet_id }} + kuryr-cni.conf: |+ + [DEFAULT] + + # + # From kuryr_kubernetes + # + # If set to true, the logging level will be set to DEBUG instead of the default + # INFO level. (boolean value) + # Note: This option can be changed without restarting. + #debug = false + + # The name of a logging configuration file. This file is appended to any + # existing logging configuration files. For details about logging configuration + # files, see the Python logging module documentation. Note that when logging + # configuration files are used then all logging configuration is set in the + # configuration file and other logging configuration options are ignored (for + # example, logging_context_format_string). (string value) + # Note: This option can be changed without restarting. + # Deprecated group/name - [DEFAULT]/log_config + #log_config_append = <None> + + # Defines the format string for %%(asctime)s in log records. Default: + # %(default)s . This option is ignored if log_config_append is set. (string + # value) + #log_date_format = %Y-%m-%d %H:%M:%S + + # (Optional) Name of log file to send logging output to. If no default is set, + # logging will go to stderr as defined by use_stderr. This option is ignored if + # log_config_append is set. (string value) + # Deprecated group/name - [DEFAULT]/logfile + #log_file = /var/log/kuryr/cni.log + + # (Optional) The base directory used for relative log_file paths. This option + # is ignored if log_config_append is set. (string value) + # Deprecated group/name - [DEFAULT]/logdir + #log_dir = <None> + + # Uses logging handler designed to watch file system. When log file is moved or + # removed this handler will open a new log file with specified path + # instantaneously. It makes sense only if log_file option is specified and + # Linux platform is used. This option is ignored if log_config_append is set. + # (boolean value) + #watch_log_file = false + + # Use syslog for logging. Existing syslog format is DEPRECATED and will be + # changed later to honor RFC5424. This option is ignored if log_config_append + # is set. (boolean value) + #use_syslog = false + + # Syslog facility to receive log lines. This option is ignored if + # log_config_append is set. (string value) + #syslog_log_facility = LOG_USER + + # Log output to standard error. This option is ignored if log_config_append is + # set. (boolean value) + use_stderr = true + + # Format string to use for log messages with context. (string value) + #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s + + # Format string to use for log messages when context is undefined. (string + # value) + #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s + + # Additional data to append to log message when logging level for the message + # is DEBUG. (string value) + #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d + + # Prefix each line of exception output with this format. (string value) + #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s + + # Defines the format string for %(user_identity)s that is used in + # logging_context_format_string. (string value) + #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s + + # List of package logging levels in logger=LEVEL pairs. This option is ignored + # if log_config_append is set. (list value) + #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO + + # Enables or disables publication of error events. (boolean value) + #publish_errors = false + + # The format for an instance that is passed with the log message. (string + # value) + #instance_format = "[instance: %(uuid)s] " + + # The format for an instance UUID that is passed with the log message. (string + # value) + #instance_uuid_format = "[instance: %(uuid)s] " + + # Enables or disables fatal status of deprecations. (boolean value) + #fatal_deprecations = false + + + [binding] + + driver = kuryr.lib.binding.drivers.vlan + link_iface = {{ kuryr_cni_link_interface }} + + [kubernetes] + + # + # From kuryr_kubernetes + # + + # The root URL of the Kubernetes API (string value) + api_root = {{ openshift.master.api_url }} + + # The token to talk to the k8s API + token_file = /etc/kuryr/token + + # Absolute path to ca cert file to connect to HTTPS K8S_API (string value) + ssl_ca_crt_file = /etc/kuryr/ca.crt + + # HTTPS K8S_API server identity verification (boolean value) + # TODO (apuimedo): Make configurable + ssl_verify_server_crt = True diff --git a/roles/kuryr/templates/controller-deployment.yaml.j2 b/roles/kuryr/templates/controller-deployment.yaml.j2 new file mode 100644 index 000000000..d970270b5 --- /dev/null +++ b/roles/kuryr/templates/controller-deployment.yaml.j2 @@ -0,0 +1,40 @@ +# More info about the template: https://docs.openstack.org/kuryr-kubernetes/latest/installation/containerized.html#generating-kuryr-resource-definitions-for-kubernetes + +apiVersion: apps/v1beta1 +kind: Deployment +metadata: + labels: + name: kuryr-controller + name: kuryr-controller + namespace: {{ kuryr_namespace }} +spec: + replicas: 1 + template: + metadata: + labels: + name: kuryr-controller + name: kuryr-controller + spec: + serviceAccountName: kuryr-controller + automountServiceAccountToken: true + hostNetwork: true + containers: + - image: kuryr/controller:latest + imagePullPolicy: IfNotPresent + name: controller + terminationMessagePath: "/dev/termination-log" + # FIXME(dulek): This shouldn't be required, but without it selinux is + # complaining about access to kuryr.conf. + securityContext: + privileged: true + runAsUser: 0 + volumeMounts: + - name: config-volume + mountPath: "/etc/kuryr/kuryr.conf" + subPath: kuryr.conf + volumes: + - name: config-volume + configMap: + name: kuryr-config + defaultMode: 0666 + restartPolicy: Always |