diff options
Diffstat (limited to 'playbooks/common/openshift-cluster')
46 files changed, 1681 insertions, 505 deletions
diff --git a/playbooks/common/openshift-cluster/config.yml b/playbooks/common/openshift-cluster/config.yml index 239bb211b..1482b3a3f 100644 --- a/playbooks/common/openshift-cluster/config.yml +++ b/playbooks/common/openshift-cluster/config.yml @@ -3,9 +3,15 @@ tags: - always -- include: disable_excluder.yml +- name: Disable excluders + hosts: oo_masters_to_config:oo_nodes_to_config tags: - always + gather_facts: no + roles: + - role: openshift_excluder + r_openshift_excluder_action: disable + r_openshift_excluder_service_type: "{{ openshift.common.service_type }}" - include: ../openshift-etcd/config.yml tags: @@ -39,6 +45,12 @@ tags: - hosted -- include: reset_excluder.yml +- name: Re-enable excluder if it was previously enabled + hosts: oo_masters_to_config:oo_nodes_to_config tags: - always + gather_facts: no + roles: + - role: openshift_excluder + r_openshift_excluder_action: enable + r_openshift_excluder_service_type: "{{ openshift.common.service_type }}" diff --git a/playbooks/common/openshift-cluster/disable_excluder.yml b/playbooks/common/openshift-cluster/disable_excluder.yml deleted file mode 100644 index f664c51c9..000000000 --- a/playbooks/common/openshift-cluster/disable_excluder.yml +++ /dev/null @@ -1,17 +0,0 @@ ---- -- name: Disable excluders - hosts: oo_masters_to_config:oo_nodes_to_config - gather_facts: no - tasks: - - # During installation the excluders are installed with present state. - # So no pre-validation check here as the excluders are either to be installed (present = latest) - # or they are not going to be updated if already installed - - # disable excluders based on their status - - include_role: - name: openshift_excluder - tasks_from: disable - vars: - openshift_excluder_package_state: present - docker_excluder_package_state: present diff --git a/playbooks/common/openshift-cluster/evaluate_groups.yml b/playbooks/common/openshift-cluster/evaluate_groups.yml index 6aac70f63..46932b27f 100644 --- a/playbooks/common/openshift-cluster/evaluate_groups.yml +++ b/playbooks/common/openshift-cluster/evaluate_groups.yml @@ -5,33 +5,40 @@ become: no gather_facts: no tasks: - - fail: + - name: Evaluate groups - g_etcd_hosts required + fail: msg: This playbook requires g_etcd_hosts to be set - when: "{{ g_etcd_hosts is not defined }}" + when: g_etcd_hosts is not defined - - fail: + - name: Evaluate groups - g_master_hosts or g_new_master_hosts required + fail: msg: This playbook requires g_master_hosts or g_new_master_hosts to be set - when: "{{ g_master_hosts is not defined and g_new_master_hosts is not defined }}" + when: g_master_hosts is not defined or g_new_master_hosts is not defined - - fail: + - name: Evaluate groups - g_node_hosts or g_new_node_hosts required + fail: msg: This playbook requires g_node_hosts or g_new_node_hosts to be set - when: "{{ g_node_hosts is not defined and g_new_node_hosts is not defined }}" + when: g_node_hosts is not defined or g_new_node_hosts is not defined - - fail: + - name: Evaluate groups - g_lb_hosts required + fail: msg: This playbook requires g_lb_hosts to be set - when: "{{ g_lb_hosts is not defined }}" + when: g_lb_hosts is not defined - - fail: + - name: Evaluate groups - g_nfs_hosts required + fail: msg: This playbook requires g_nfs_hosts to be set - when: "{{ g_nfs_hosts is not defined }}" + when: g_nfs_hosts is not defined - - fail: + - name: Evaluate groups - g_nfs_hosts is single host + fail: msg: The nfs group must be limited to one host - when: "{{ (groups[g_nfs_hosts] | default([])) | length > 1 }}" + when: (groups[g_nfs_hosts] | default([])) | length > 1 - - fail: + - name: Evaluate groups - g_glusterfs_hosts required + fail: msg: This playbook requires g_glusterfs_hosts to be set - when: "{{ g_glusterfs_hosts is not defined }}" + when: g_glusterfs_hosts is not defined - name: Evaluate oo_all_hosts add_host: @@ -51,13 +58,13 @@ with_items: "{{ g_master_hosts | union(g_new_master_hosts) | default([]) }}" changed_when: no - - name: Evaluate oo_etcd_to_config + - name: Evaluate oo_first_master add_host: - name: "{{ item }}" - groups: oo_etcd_to_config + name: "{{ g_master_hosts[0] }}" + groups: oo_first_master ansible_ssh_user: "{{ g_ssh_user | default(omit) }}" ansible_become: "{{ g_sudo | default(omit) }}" - with_items: "{{ g_etcd_hosts | default([]) }}" + when: g_master_hosts|length > 0 changed_when: no - name: Evaluate oo_masters_to_config @@ -69,41 +76,59 @@ with_items: "{{ g_new_master_hosts | default(g_master_hosts | default([], true), true) }}" changed_when: no - - name: Evaluate oo_nodes_to_config + - name: Evaluate oo_etcd_to_config add_host: name: "{{ item }}" - groups: oo_nodes_to_config + groups: oo_etcd_to_config ansible_ssh_user: "{{ g_ssh_user | default(omit) }}" ansible_become: "{{ g_sudo | default(omit) }}" - with_items: "{{ g_new_node_hosts | default(g_node_hosts | default([], true), true) }}" + with_items: "{{ g_etcd_hosts | default([]) }}" changed_when: no - # Skip adding the master to oo_nodes_to_config when g_new_node_hosts is - - name: Add master to oo_nodes_to_config + - name: Evaluate oo_first_etcd add_host: - name: "{{ item }}" - groups: oo_nodes_to_config + name: "{{ g_etcd_hosts[0] }}" + groups: oo_first_etcd ansible_ssh_user: "{{ g_ssh_user | default(omit) }}" ansible_become: "{{ g_sudo | default(omit) }}" - with_items: "{{ g_master_hosts | default([]) }}" - when: "{{ g_nodeonmaster | default(false) | bool and not g_new_node_hosts | default(false) | bool }}" + when: g_etcd_hosts|length > 0 changed_when: no - - name: Evaluate oo_first_etcd + # We use two groups one for hosts we're upgrading which doesn't include embedded etcd + # The other for backing up which includes the embedded etcd host, there's no need to + # upgrade embedded etcd that just happens when the master is updated. + - name: Evaluate oo_etcd_hosts_to_upgrade add_host: - name: "{{ g_etcd_hosts[0] }}" - groups: oo_first_etcd + name: "{{ item }}" + groups: oo_etcd_hosts_to_upgrade + with_items: "{{ groups.oo_etcd_to_config if groups.oo_etcd_to_config is defined and groups.oo_etcd_to_config | length > 0 else [] }}" + changed_when: False + + - name: Evaluate oo_etcd_hosts_to_backup + add_host: + name: "{{ item }}" + groups: oo_etcd_hosts_to_backup + with_items: "{{ groups.oo_etcd_to_config if groups.oo_etcd_to_config is defined and groups.oo_etcd_to_config | length > 0 else groups.oo_first_master }}" + changed_when: False + + - name: Evaluate oo_nodes_to_config + add_host: + name: "{{ item }}" + groups: oo_nodes_to_config ansible_ssh_user: "{{ g_ssh_user | default(omit) }}" - when: "{{ g_etcd_hosts|length > 0 }}" + ansible_become: "{{ g_sudo | default(omit) }}" + with_items: "{{ g_new_node_hosts | default(g_node_hosts | default([], true), true) }}" changed_when: no - - name: Evaluate oo_first_master + # Skip adding the master to oo_nodes_to_config when g_new_node_hosts is + - name: Add master to oo_nodes_to_config add_host: - name: "{{ g_master_hosts[0] }}" - groups: oo_first_master + name: "{{ item }}" + groups: oo_nodes_to_config ansible_ssh_user: "{{ g_ssh_user | default(omit) }}" ansible_become: "{{ g_sudo | default(omit) }}" - when: "{{ g_master_hosts|length > 0 }}" + with_items: "{{ g_master_hosts | default([]) }}" + when: g_nodeonmaster | default(false) | bool and not g_new_node_hosts | default(false) | bool changed_when: no - name: Evaluate oo_lb_to_config @@ -130,5 +155,5 @@ groups: oo_glusterfs_to_config ansible_ssh_user: "{{ g_ssh_user | default(omit) }}" ansible_become: "{{ g_sudo | default(omit) }}" - with_items: "{{ g_glusterfs_hosts | default([]) }}" + with_items: "{{ g_glusterfs_hosts | union(g_glusterfs_registry_hosts) | default([]) }}" changed_when: no diff --git a/playbooks/common/openshift-cluster/initialize_openshift_version.yml b/playbooks/common/openshift-cluster/initialize_openshift_version.yml index 07b38920f..f4e52869e 100644 --- a/playbooks/common/openshift-cluster/initialize_openshift_version.yml +++ b/playbooks/common/openshift-cluster/initialize_openshift_version.yml @@ -1,13 +1,14 @@ --- # NOTE: requires openshift_facts be run - name: Verify compatible yum/subscription-manager combination - hosts: l_oo_all_hosts + hosts: oo_all_hosts gather_facts: no tasks: # See: # https://bugzilla.redhat.com/show_bug.cgi?id=1395047 # https://bugzilla.redhat.com/show_bug.cgi?id=1282961 # https://github.com/openshift/openshift-ansible/issues/1138 + # Consider the repoquery module for this work - name: Check for bad combinations of yum and subscription-manager command: > {{ repoquery_cmd }} --installed --qf '%{version}' "yum" @@ -16,7 +17,7 @@ when: not openshift.common.is_atomic | bool - fail: msg: Incompatible versions of yum and subscription-manager found. You may need to update yum and yum-utils. - when: "not openshift.common.is_atomic | bool and 'Plugin \"search-disabled-repos\" requires API 2.7. Supported API is 2.6.' in yum_ver_test.stdout" + when: not openshift.common.is_atomic | bool and 'Plugin \"search-disabled-repos\" requires API 2.7. Supported API is 2.6.' in yum_ver_test.stdout - name: Determine openshift_version to configure on first master hosts: oo_first_master diff --git a/playbooks/common/openshift-cluster/redeploy-certificates/ca.yml b/playbooks/common/openshift-cluster/redeploy-certificates/ca.yml index 4fa7f9cdf..0d0ff798c 100644 --- a/playbooks/common/openshift-cluster/redeploy-certificates/ca.yml +++ b/playbooks/common/openshift-cluster/redeploy-certificates/ca.yml @@ -9,7 +9,8 @@ - name: Backup existing etcd CA certificate directories hosts: oo_etcd_to_config roles: - - etcd_common + - role: etcd_common + r_etcd_common_etcd_runtime: "{{ openshift.common.etcd_runtime }}" tasks: - name: Determine if CA certificate directory exists stat: @@ -52,7 +53,8 @@ vars: etcd_ca_host: "{{ groups.oo_etcd_to_config.0 }}" roles: - - etcd_common + - role: etcd_common + r_etcd_common_etcd_runtime: "{{ openshift.common.etcd_runtime }}" tasks: - name: Create a tarball of the etcd ca certs command: > @@ -98,7 +100,8 @@ - name: Retrieve etcd CA certificate hosts: oo_first_etcd roles: - - etcd_common + - role: etcd_common + r_etcd_common_etcd_runtime: "{{ openshift.common.etcd_runtime }}" tasks: - name: Retrieve etcd CA certificate fetch: diff --git a/playbooks/common/openshift-cluster/redeploy-certificates/etcd.yml b/playbooks/common/openshift-cluster/redeploy-certificates/etcd.yml index 2963a5940..6b5c805e6 100644 --- a/playbooks/common/openshift-cluster/redeploy-certificates/etcd.yml +++ b/playbooks/common/openshift-cluster/redeploy-certificates/etcd.yml @@ -3,7 +3,8 @@ hosts: oo_first_etcd any_errors_fatal: true roles: - - etcd_common + - role: etcd_common + r_etcd_common_etcd_runtime: "{{ openshift.common.etcd_runtime }}" post_tasks: - name: Determine if generated etcd certificates exist stat: @@ -27,7 +28,8 @@ hosts: oo_etcd_to_config any_errors_fatal: true roles: - - etcd_common + - role: etcd_common + r_etcd_common_etcd_runtime: "{{ openshift.common.etcd_runtime }}" post_tasks: - name: Backup etcd certificates command: > @@ -50,6 +52,7 @@ etcd_peers: "{{ groups.oo_etcd_to_config | default([], true) }}" etcd_certificates_etcd_hosts: "{{ groups.oo_etcd_to_config | default([], true) }}" openshift_ca_host: "{{ groups.oo_first_master.0 }}" + r_etcd_common_etcd_runtime: "{{ openshift.common.etcd_runtime }}" - name: Redeploy etcd client certificates for masters hosts: oo_masters_to_config @@ -63,4 +66,5 @@ etcd_cert_prefix: "master.etcd-" openshift_ca_host: "{{ groups.oo_first_master.0 }}" openshift_master_count: "{{ openshift.master.master_count | default(groups.oo_masters | length) }}" + r_etcd_common_etcd_runtime: "{{ openshift.common.etcd_runtime }}" when: groups.oo_etcd_to_config is defined and groups.oo_etcd_to_config diff --git a/playbooks/common/openshift-cluster/reset_excluder.yml b/playbooks/common/openshift-cluster/reset_excluder.yml deleted file mode 100644 index eaa8ce39c..000000000 --- a/playbooks/common/openshift-cluster/reset_excluder.yml +++ /dev/null @@ -1,8 +0,0 @@ ---- -- name: Re-enable excluder if it was previously enabled - hosts: oo_masters_to_config:oo_nodes_to_config - gather_facts: no - tasks: - - include_role: - name: openshift_excluder - tasks_from: enable diff --git a/playbooks/common/openshift-cluster/upgrades/disable_excluder.yml b/playbooks/common/openshift-cluster/upgrades/disable_excluder.yml deleted file mode 100644 index a30952929..000000000 --- a/playbooks/common/openshift-cluster/upgrades/disable_excluder.yml +++ /dev/null @@ -1,22 +0,0 @@ ---- -- name: Record excluder state and disable - hosts: oo_masters_to_config:oo_nodes_to_config - gather_facts: no - tasks: - - include: pre/validate_excluder.yml - vars: - excluder: "{{ openshift.common.service_type }}-docker-excluder" - when: enable_docker_excluder | default(enable_excluders) | default(True) | bool - - include: pre/validate_excluder.yml - vars: - excluder: "{{ openshift.common.service_type }}-excluder" - when: enable_openshift_excluder | default(enable_excluders) | default(True) | bool - - - # disable excluders based on their status - - include_role: - name: openshift_excluder - tasks_from: disable - vars: - openshift_excluder_package_state: latest - docker_excluder_package_state: latest diff --git a/playbooks/common/openshift-cluster/upgrades/disable_master_excluders.yml b/playbooks/common/openshift-cluster/upgrades/disable_master_excluders.yml new file mode 100644 index 000000000..800621857 --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/disable_master_excluders.yml @@ -0,0 +1,12 @@ +--- +- name: Disable excluders + hosts: oo_masters_to_config + gather_facts: no + roles: + - role: openshift_excluder + r_openshift_excluder_action: disable + r_openshift_excluder_service_type: "{{ openshift.common.service_type }}" + r_openshift_excluder_verify_upgrade: true + r_openshift_excluder_upgrade_target: "{{ openshift_upgrade_target }}" + r_openshift_excluder_package_state: latest + r_openshift_excluder_docker_package_state: latest diff --git a/playbooks/common/openshift-cluster/upgrades/disable_node_excluders.yml b/playbooks/common/openshift-cluster/upgrades/disable_node_excluders.yml new file mode 100644 index 000000000..7988e97ab --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/disable_node_excluders.yml @@ -0,0 +1,12 @@ +--- +- name: Disable excluders + hosts: oo_nodes_to_config + gather_facts: no + roles: + - role: openshift_excluder + r_openshift_excluder_action: disable + r_openshift_excluder_service_type: "{{ openshift.common.service_type }}" + r_openshift_excluder_verify_upgrade: true + r_openshift_excluder_upgrade_target: "{{ openshift_upgrade_target }}" + r_openshift_excluder_package_state: latest + r_openshift_excluder_docker_package_state: latest diff --git a/playbooks/common/openshift-cluster/upgrades/etcd/backup.yml b/playbooks/common/openshift-cluster/upgrades/etcd/backup.yml index fb51a0061..b7fd2c0c5 100644 --- a/playbooks/common/openshift-cluster/upgrades/etcd/backup.yml +++ b/playbooks/common/openshift-cluster/upgrades/etcd/backup.yml @@ -1,84 +1,14 @@ --- - name: Backup etcd - hosts: etcd_hosts_to_backup - vars: - embedded_etcd: "{{ groups.oo_etcd_to_config | default([]) | length == 0 }}" - etcdctl_command: "{{ 'etcdctl' if not openshift.common.is_containerized or embedded_etcd else 'docker exec etcd_container etcdctl' if not openshift.common.is_etcd_system_container else 'runc exec etcd etcdctl' }}" - timestamp: "{{ lookup('pipe', 'date +%Y%m%d%H%M%S') }}" + hosts: oo_etcd_hosts_to_backup roles: - - openshift_facts - tasks: - # Ensure we persist the etcd role for this host in openshift_facts - - openshift_facts: - role: etcd - local_facts: {} - when: "'etcd' not in openshift" - - set_fact: - etcd_backup_dir: "{{ openshift.etcd.etcd_data_dir }}/openshift-backup-{{ backup_tag | default('') }}{{ timestamp }}" - - # TODO: replace shell module with command and update later checks - - name: Check available disk space for etcd backup - shell: df --output=avail -k {{ openshift.etcd.etcd_data_dir }} | tail -n 1 - register: avail_disk - # AUDIT:changed_when: `false` because we are only inspecting - # state, not manipulating anything - changed_when: false - - # TODO: replace shell module with command and update later checks - - name: Check current etcd disk usage - shell: du --exclude='*openshift-backup*' -k {{ openshift.etcd.etcd_data_dir }} | tail -n 1 | cut -f1 - register: etcd_disk_usage - when: embedded_etcd | bool - # AUDIT:changed_when: `false` because we are only inspecting - # state, not manipulating anything - changed_when: false - - - name: Abort if insufficient disk space for etcd backup - fail: - msg: > - {{ etcd_disk_usage.stdout }} Kb disk space required for etcd backup, - {{ avail_disk.stdout }} Kb available. - when: (embedded_etcd | bool) and (etcd_disk_usage.stdout|int > avail_disk.stdout|int) - - # For non containerized and non embedded we should have the correct version of - # etcd installed already. So don't do anything. - # - # For containerized installs we now exec into etcd_container - # - # For embedded non containerized we need to ensure we have the latest version - # etcd on the host. - - name: Install latest etcd for embedded - package: - name: etcd - state: latest - when: - - embedded_etcd | bool - - not openshift.common.is_atomic | bool - - - name: Generate etcd backup - command: > - {{ etcdctl_command }} backup --data-dir={{ openshift.etcd.etcd_data_dir }} - --backup-dir={{ etcd_backup_dir }} - - # According to the docs change you can simply copy snap/db - # https://github.com/openshift/openshift-docs/commit/b38042de02d9780842dce95cfa0ef45d53b58bc6 - - name: Check for v3 data store - stat: - path: "{{ openshift.etcd.etcd_data_dir }}/member/snap/db" - register: v3_db - - - name: Copy etcd v3 data store - command: > - cp -a {{ openshift.etcd.etcd_data_dir }}/member/snap/db - {{ etcd_backup_dir }}/member/snap/ - when: v3_db.stat.exists - - - set_fact: - etcd_backup_complete: True - - - name: Display location of etcd backup - debug: - msg: "Etcd backup created in {{ etcd_backup_dir }}" + - role: openshift_facts + - role: etcd_upgrade + r_etcd_upgrade_action: backup + r_etcd_backup_tag: etcd_backup_tag + r_etcd_common_etcd_runtime: "{{ openshift.common.etcd_runtime }}" + r_etcd_upgrade_embedded_etcd: "{{ groups.oo_etcd_to_config | default([]) | length == 0 }}" + r_etcd_backup_sufix_name: "{{ lookup('pipe', 'date +%Y%m%d%H%M%S') }}" - name: Gate on etcd backup hosts: localhost @@ -87,10 +17,10 @@ tasks: - set_fact: etcd_backup_completed: "{{ hostvars - | oo_select_keys(groups.etcd_hosts_to_backup) - | oo_collect('inventory_hostname', {'etcd_backup_complete': true}) }}" + | oo_select_keys(groups.oo_etcd_hosts_to_backup) + | oo_collect('inventory_hostname', {'r_etcd_upgrade_backup_complete': true}) }}" - set_fact: - etcd_backup_failed: "{{ groups.etcd_hosts_to_backup | difference(etcd_backup_completed) }}" + etcd_backup_failed: "{{ groups.oo_etcd_hosts_to_backup | difference(etcd_backup_completed) }}" - fail: msg: "Upgrade cannot continue. The following hosts did not complete etcd backup: {{ etcd_backup_failed | join(',') }}" when: etcd_backup_failed | length > 0 diff --git a/playbooks/common/openshift-cluster/upgrades/etcd/containerized_tasks.yml b/playbooks/common/openshift-cluster/upgrades/etcd/containerized_tasks.yml deleted file mode 100644 index 5f8b59e17..000000000 --- a/playbooks/common/openshift-cluster/upgrades/etcd/containerized_tasks.yml +++ /dev/null @@ -1,46 +0,0 @@ ---- -- name: Verify cluster is healthy pre-upgrade - command: "etcdctl --cert-file /etc/etcd/peer.crt --key-file /etc/etcd/peer.key --ca-file /etc/etcd/ca.crt -C https://{{ openshift.common.hostname }}:2379 cluster-health" - -- name: Get current image - shell: grep 'ExecStart=' /etc/systemd/system/etcd_container.service | awk '{print $NF}' - register: current_image - -- name: Set new_etcd_image - set_fact: - new_etcd_image: "{{ current_image.stdout | regex_replace('/etcd.*$','/etcd:' ~ upgrade_version ) }}" - -- name: Pull new etcd image - command: "docker pull {{ new_etcd_image }}" - -- name: Update to latest etcd image - replace: - dest: /etc/systemd/system/etcd_container.service - regexp: "{{ current_image.stdout }}$" - replace: "{{ new_etcd_image }}" - -- name: Restart etcd_container - systemd: - name: etcd_container - daemon_reload: yes - state: restarted - -## TODO: probably should just move this into the backup playbooks, also this -## will fail on atomic host. We need to revisit how to do etcd backups there as -## the container may be newer than etcdctl on the host. Assumes etcd3 obsoletes etcd (7.3.1) -- name: Upgrade etcd for etcdctl when not atomic - package: name=etcd state=latest - when: not openshift.common.is_atomic | bool - -- name: Verify cluster is healthy - command: "etcdctl --cert-file /etc/etcd/peer.crt --key-file /etc/etcd/peer.key --ca-file /etc/etcd/ca.crt -C https://{{ openshift.common.hostname }}:2379 cluster-health" - register: etcdctl - until: etcdctl.rc == 0 - retries: 3 - delay: 10 - -- name: Store new etcd_image - openshift_facts: - role: etcd - local_facts: - etcd_image: "{{ new_etcd_image }}" diff --git a/playbooks/common/openshift-cluster/upgrades/etcd/fedora_tasks.yml b/playbooks/common/openshift-cluster/upgrades/etcd/fedora_tasks.yml deleted file mode 100644 index 30232110e..000000000 --- a/playbooks/common/openshift-cluster/upgrades/etcd/fedora_tasks.yml +++ /dev/null @@ -1,23 +0,0 @@ ---- -# F23 GA'd with etcd 2.0, currently has 2.2 in updates -# F24 GA'd with etcd-2.2, currently has 2.2 in updates -# F25 Beta currently has etcd 3.0 -- name: Verify cluster is healthy pre-upgrade - command: "etcdctl --cert-file /etc/etcd/peer.crt --key-file /etc/etcd/peer.key --ca-file /etc/etcd/ca.crt -C https://{{ openshift.common.hostname }}:2379 cluster-health" - -- name: Update etcd - package: - name: "etcd" - state: "latest" - -- name: Restart etcd - service: - name: etcd - state: restarted - -- name: Verify cluster is healthy - command: "etcdctl --cert-file /etc/etcd/peer.crt --key-file /etc/etcd/peer.key --ca-file /etc/etcd/ca.crt -C https://{{ openshift.common.hostname }}:2379 cluster-health" - register: etcdctl - until: etcdctl.rc == 0 - retries: 3 - delay: 10 diff --git a/playbooks/common/openshift-cluster/upgrades/etcd/files/etcdctl.sh b/playbooks/common/openshift-cluster/upgrades/etcd/files/etcdctl.sh deleted file mode 120000 index 641e04e44..000000000 --- a/playbooks/common/openshift-cluster/upgrades/etcd/files/etcdctl.sh +++ /dev/null @@ -1 +0,0 @@ -../roles/etcd/files/etcdctl.sh
\ No newline at end of file diff --git a/playbooks/common/openshift-cluster/upgrades/etcd/main.yml b/playbooks/common/openshift-cluster/upgrades/etcd/main.yml index fa86d29fb..3e01883ae 100644 --- a/playbooks/common/openshift-cluster/upgrades/etcd/main.yml +++ b/playbooks/common/openshift-cluster/upgrades/etcd/main.yml @@ -5,42 +5,18 @@ # mirrored packages on your own because only the GA and latest versions are # available in the repos. So for Fedora we'll simply skip this, sorry. -- include: ../../evaluate_groups.yml - tags: - - always - -# We use two groups one for hosts we're upgrading which doesn't include embedded etcd -# The other for backing up which includes the embedded etcd host, there's no need to -# upgrade embedded etcd that just happens when the master is updated. -- name: Evaluate additional groups for etcd - hosts: localhost - connection: local - become: no - tasks: - - name: Evaluate etcd_hosts_to_upgrade - add_host: - name: "{{ item }}" - groups: etcd_hosts_to_upgrade - with_items: "{{ groups.oo_etcd_to_config if groups.oo_etcd_to_config is defined and groups.oo_etcd_to_config | length > 0 else [] }}" - changed_when: False - - - name: Evaluate etcd_hosts_to_backup - add_host: - name: "{{ item }}" - groups: etcd_hosts_to_backup - with_items: "{{ groups.oo_etcd_to_config if groups.oo_etcd_to_config is defined and groups.oo_etcd_to_config | length > 0 else groups.oo_first_master }}" - changed_when: False - - name: Backup etcd before upgrading anything include: backup.yml vars: - backup_tag: "pre-upgrade-" + etcd_backup_tag: "pre-upgrade-" when: openshift_etcd_backup | default(true) | bool - name: Drop etcdctl profiles - hosts: etcd_hosts_to_upgrade + hosts: oo_etcd_hosts_to_upgrade tasks: - - include: roles/etcd/tasks/etcdctl.yml + - include_role: + name: etcd_common + tasks_from: etcdctl.yml - name: Perform etcd upgrade include: ./upgrade.yml diff --git a/playbooks/common/openshift-cluster/upgrades/etcd/rhel_tasks.yml b/playbooks/common/openshift-cluster/upgrades/etcd/rhel_tasks.yml deleted file mode 100644 index 3a972e8ab..000000000 --- a/playbooks/common/openshift-cluster/upgrades/etcd/rhel_tasks.yml +++ /dev/null @@ -1,20 +0,0 @@ ---- -- name: Verify cluster is healthy pre-upgrade - command: "etcdctl --cert-file /etc/etcd/peer.crt --key-file /etc/etcd/peer.key --ca-file /etc/etcd/ca.crt -C https://{{ openshift.common.hostname }}:2379 cluster-health" - -- name: Update etcd RPM - package: - name: etcd-{{ upgrade_version }}* - state: latest - -- name: Restart etcd - service: - name: etcd - state: restarted - -- name: Verify cluster is healthy - command: "etcdctl --cert-file /etc/etcd/peer.crt --key-file /etc/etcd/peer.key --ca-file /etc/etcd/ca.crt -C https://{{ openshift.common.hostname }}:2379 cluster-health" - register: etcdctl - until: etcdctl.rc == 0 - retries: 3 - delay: 10 diff --git a/playbooks/common/openshift-cluster/upgrades/etcd/upgrade.yml b/playbooks/common/openshift-cluster/upgrades/etcd/upgrade.yml index a9b5b94e6..0431c1ce0 100644 --- a/playbooks/common/openshift-cluster/upgrades/etcd/upgrade.yml +++ b/playbooks/common/openshift-cluster/upgrades/etcd/upgrade.yml @@ -1,119 +1,110 @@ --- - name: Determine etcd version - hosts: etcd_hosts_to_upgrade + hosts: oo_etcd_hosts_to_upgrade tasks: - - name: Record RPM based etcd version - command: rpm -qa --qf '%{version}' etcd\* - args: - warn: no - register: etcd_rpm_version - failed_when: false - when: not openshift.common.is_containerized | bool - # AUDIT:changed_when: `false` because we are only inspecting - # state, not manipulating anything - changed_when: false - - - name: Record containerized etcd version - command: docker exec etcd_container rpm -qa --qf '%{version}' etcd\* - register: etcd_container_version - failed_when: false - when: openshift.common.is_containerized | bool - # AUDIT:changed_when: `false` because we are only inspecting - # state, not manipulating anything - changed_when: false - - - name: Record containerized etcd version - command: docker exec etcd_container rpm -qa --qf '%{version}' etcd\* - register: etcd_container_version - failed_when: false - when: openshift.common.is_containerized | bool and not openshift.common.is_etcd_system_container | bool - # AUDIT:changed_when: `false` because we are only inspecting - # state, not manipulating anything - changed_when: false - - - name: Record containerized etcd version - command: runc exec etcd_container rpm -qa --qf '%{version}' etcd\* - register: etcd_container_version - failed_when: false - when: openshift.common.is_containerized | bool and openshift.common.is_etcd_system_container | bool - # AUDIT:changed_when: `false` because we are only inspecting - # state, not manipulating anything - changed_when: false - -# I really dislike this copy/pasta but I wasn't able to find a way to get it to loop -# through hosts, then loop through tasks only when appropriate -- name: Upgrade to 2.1 - hosts: etcd_hosts_to_upgrade - serial: 1 + - block: + - name: Record RPM based etcd version + command: rpm -qa --qf '%{version}' etcd\* + args: + warn: no + register: etcd_rpm_version + failed_when: false + # AUDIT:changed_when: `false` because we are only inspecting + # state, not manipulating anything + changed_when: false + - debug: + msg: "Etcd rpm version {{ etcd_rpm_version.stdout }} detected" + when: + - not openshift.common.is_containerized | bool + + - block: + - name: Record containerized etcd version (docker) + command: docker exec etcd_container rpm -qa --qf '%{version}' etcd\* + register: etcd_container_version_docker + failed_when: false + # AUDIT:changed_when: `false` because we are only inspecting + # state, not manipulating anything + changed_when: false + when: + - not openshift.common.is_etcd_system_container | bool + + # Given a register variables is set even if the whwen condition + # is false, we need to set etcd_container_version separately + - set_fact: + etcd_container_version: "{{ etcd_container_version_docker.stdout }}" + when: + - not openshift.common.is_etcd_system_container | bool + + - name: Record containerized etcd version (runc) + command: runc exec etcd_container rpm -qa --qf '%{version}' etcd\* + register: etcd_container_version_runc + failed_when: false + # AUDIT:changed_when: `false` because we are only inspecting + # state, not manipulating anything + changed_when: false + when: + - openshift.common.is_etcd_system_container | bool + + # Given a register variables is set even if the whwen condition + # is false, we need to set etcd_container_version separately + - set_fact: + etcd_container_version: "{{ etcd_container_version_runc.stdout }}" + when: + - openshift.common.is_etcd_system_container | bool + + - debug: + msg: "Etcd containerized version {{ etcd_container_version }} detected" + when: + - openshift.common.is_containerized | bool + +- include: upgrade_rpm_members.yml vars: - upgrade_version: '2.1' - tasks: - - include: rhel_tasks.yml - when: etcd_rpm_version.stdout | default('99') | version_compare('2.1','<') and ansible_distribution == 'RedHat' and not openshift.common.is_containerized | bool + etcd_upgrade_version: '2.1' -- name: Upgrade RPM hosts to 2.2 - hosts: etcd_hosts_to_upgrade - serial: 1 +- include: upgrade_rpm_members.yml vars: - upgrade_version: '2.2' - tasks: - - include: rhel_tasks.yml - when: etcd_rpm_version.stdout | default('99') | version_compare('2.2','<') and ansible_distribution == 'RedHat' and not openshift.common.is_containerized | bool + etcd_upgrade_version: '2.2' -- name: Upgrade containerized hosts to 2.2.5 - hosts: etcd_hosts_to_upgrade - serial: 1 +- include: upgrade_image_members.yml vars: - upgrade_version: 2.2.5 - tasks: - - include: containerized_tasks.yml - when: etcd_container_version.stdout | default('99') | version_compare('2.2','<') and openshift.common.is_containerized | bool + etcd_upgrade_version: '2.2.5' -- name: Upgrade RPM hosts to 2.3 - hosts: etcd_hosts_to_upgrade - serial: 1 +- include: upgrade_rpm_members.yml vars: - upgrade_version: '2.3' - tasks: - - include: rhel_tasks.yml - when: etcd_rpm_version.stdout | default('99') | version_compare('2.3','<') and ansible_distribution == 'RedHat' and not openshift.common.is_containerized | bool + etcd_upgrade_version: '2.3' -- name: Upgrade containerized hosts to 2.3.7 - hosts: etcd_hosts_to_upgrade - serial: 1 +- include: upgrade_image_members.yml vars: - upgrade_version: 2.3.7 - tasks: - - include: containerized_tasks.yml - when: etcd_container_version.stdout | default('99') | version_compare('2.3','<') and openshift.common.is_containerized | bool + etcd_upgrade_version: '2.3.7' -- name: Upgrade RPM hosts to 3.0 - hosts: etcd_hosts_to_upgrade - serial: 1 +- include: upgrade_rpm_members.yml vars: - upgrade_version: '3.0' - tasks: - - include: rhel_tasks.yml - when: etcd_rpm_version.stdout | default('99') | version_compare('3.0','<') and ansible_distribution == 'RedHat' and not openshift.common.is_containerized | bool + etcd_upgrade_version: '3.0' -- name: Upgrade containerized hosts to etcd3 image - hosts: etcd_hosts_to_upgrade - serial: 1 +- include: upgrade_image_members.yml vars: - upgrade_version: 3.0.15 - tasks: - - include: containerized_tasks.yml - when: etcd_container_version.stdout | default('99') | version_compare('3.0','<') and openshift.common.is_containerized | bool + etcd_upgrade_version: '3.0.15' + +- include: upgrade_rpm_members.yml + vars: + etcd_upgrade_version: '3.1' + +- include: upgrade_image_members.yml + vars: + etcd_upgrade_version: '3.1.3' - name: Upgrade fedora to latest - hosts: etcd_hosts_to_upgrade + hosts: oo_etcd_hosts_to_upgrade serial: 1 tasks: - - include: fedora_tasks.yml - when: ansible_distribution == 'Fedora' and not openshift.common.is_containerized | bool + - include_role: + name: etcd_upgrade + when: + - ansible_distribution == 'Fedora' + - not openshift.common.is_containerized | bool - name: Backup etcd include: backup.yml vars: - backup_tag: "post-3.0-" + etcd_backup_tag: "post-3.0-" when: openshift_etcd_backup | default(true) | bool diff --git a/playbooks/common/openshift-cluster/upgrades/etcd/upgrade_image_members.yml b/playbooks/common/openshift-cluster/upgrades/etcd/upgrade_image_members.yml new file mode 100644 index 000000000..831ca8f57 --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/etcd/upgrade_image_members.yml @@ -0,0 +1,17 @@ +--- +# INPUT etcd_upgrade_version +# INPUT etcd_container_version +# INPUT openshift.common.is_containerized +- name: Upgrade containerized hosts to {{ etcd_upgrade_version }} + hosts: oo_etcd_hosts_to_upgrade + serial: 1 + roles: + - role: etcd_upgrade + r_etcd_upgrade_action: upgrade + r_etcd_upgrade_mechanism: image + r_etcd_upgrade_version: "{{ etcd_upgrade_version }}" + r_etcd_common_etcd_runtime: "{{ openshift.common.etcd_runtime }}" + etcd_peer: "{{ openshift.common.hostname }}" + when: + - etcd_container_version | default('99') | version_compare(etcd_upgrade_version,'<') + - openshift.common.is_containerized | bool diff --git a/playbooks/common/openshift-cluster/upgrades/etcd/upgrade_rpm_members.yml b/playbooks/common/openshift-cluster/upgrades/etcd/upgrade_rpm_members.yml new file mode 100644 index 000000000..2e79451e0 --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/etcd/upgrade_rpm_members.yml @@ -0,0 +1,18 @@ +--- +# INPUT etcd_upgrade_version +# INPUT etcd_rpm_version +# INPUT openshift.common.is_containerized +- name: Upgrade to {{ etcd_upgrade_version }} + hosts: oo_etcd_hosts_to_upgrade + serial: 1 + roles: + - role: etcd_upgrade + r_etcd_upgrade_action: upgrade + r_etcd_upgrade_mechanism: rpm + r_etcd_upgrade_version: "{{ etcd_upgrade_version }}" + r_etcd_common_etcd_runtime: "host" + etcd_peer: "{{ openshift.common.hostname }}" + when: + - etcd_rpm_version.stdout | default('99') | version_compare(etcd_upgrade_version, '<') + - ansible_distribution == 'RedHat' + - not openshift.common.is_containerized | bool diff --git a/playbooks/common/openshift-cluster/upgrades/init.yml b/playbooks/common/openshift-cluster/upgrades/init.yml index cbf6d58b3..0f421928b 100644 --- a/playbooks/common/openshift-cluster/upgrades/init.yml +++ b/playbooks/common/openshift-cluster/upgrades/init.yml @@ -10,17 +10,6 @@ - include: ../initialize_facts.yml -- name: Ensure clean repo cache in the event repos have been changed manually - hosts: oo_all_hosts - tags: - - pre_upgrade - tasks: - - name: Clean package cache - command: "{{ ansible_pkg_mgr }} clean all" - when: not openshift.common.is_atomic | bool - args: - warn: no - - name: Ensure firewall is not switched during upgrade hosts: oo_all_hosts tasks: diff --git a/playbooks/common/openshift-cluster/upgrades/library/openshift_upgrade_config.py b/playbooks/common/openshift-cluster/upgrades/library/openshift_upgrade_config.py index 673f11889..4eac8b067 100755 --- a/playbooks/common/openshift-cluster/upgrades/library/openshift_upgrade_config.py +++ b/playbooks/common/openshift-cluster/upgrades/library/openshift_upgrade_config.py @@ -1,7 +1,5 @@ #!/usr/bin/python # -*- coding: utf-8 -*- -# vim: expandtab:tabstop=4:shiftwidth=4 - """Ansible module for modifying OpenShift configs during an upgrade""" import os diff --git a/playbooks/common/openshift-cluster/upgrades/post_control_plane.yml b/playbooks/common/openshift-cluster/upgrades/post_control_plane.yml index 0d7cdb227..4cf434dab 100644 --- a/playbooks/common/openshift-cluster/upgrades/post_control_plane.yml +++ b/playbooks/common/openshift-cluster/upgrades/post_control_plane.yml @@ -9,6 +9,8 @@ replace ( '${version}', openshift_image_tag ) }}" router_image: "{{ openshift.master.registry_url | replace( '${component}', 'haproxy-router' ) | replace ( '${version}', openshift_image_tag ) }}" + registry_console_image: "{{ openshift.master.registry_url | replace ( '${component}', 'registry-console') | + replace ( '${version}', 'v' ~ openshift.common.short_version ) }}" pre_tasks: - name: Load lib_openshift modules @@ -61,6 +63,26 @@ when: - _default_registry.results.results[0] != {} + - name: Check for registry-console + oc_obj: + state: list + kind: dc + name: registry-console + register: _registry_console + when: + - openshift.common.deployment_type != 'origin' + + - name: Update registry-console image to current version + oc_edit: + kind: dc + name: registry-console + namespace: default + content: + spec.template.spec.containers[0].image: "{{ registry_console_image }}" + when: + - openshift.common.deployment_type != 'origin' + - _registry_console.results.results[0] != {} + roles: - openshift_manageiq # Create the new templates shipped in 3.2, existing templates are left @@ -97,6 +119,12 @@ - not grep_plugin_order_override | skipped - grep_plugin_order_override.rc == 0 -- include: ../reset_excluder.yml +- name: Re-enable excluder if it was previously enabled + hosts: oo_masters_to_config tags: - always + gather_facts: no + roles: + - role: openshift_excluder + r_openshift_excluder_action: enable + r_openshift_excluder_service_type: "{{ openshift.common.service_type }}" diff --git a/playbooks/common/openshift-cluster/upgrades/pre/validate_excluder.yml b/playbooks/common/openshift-cluster/upgrades/pre/validate_excluder.yml deleted file mode 100644 index 6de1ed061..000000000 --- a/playbooks/common/openshift-cluster/upgrades/pre/validate_excluder.yml +++ /dev/null @@ -1,29 +0,0 @@ ---- -# input variables: -# - repoquery_cmd -# - excluder -# - openshift_upgrade_target -- block: - - name: Get available excluder version - command: > - {{ repoquery_cmd }} --qf '%{version}' "{{ excluder }}" - register: excluder_version - failed_when: false - changed_when: false - - - name: Docker excluder version detected - debug: - msg: "{{ excluder }}: {{ excluder_version.stdout }}" - - - name: Printing upgrade target version - debug: - msg: "{{ openshift_upgrade_target }}" - - - name: Check the available {{ excluder }} version is at most of the upgrade target version - fail: - msg: "Available {{ excluder }} version {{ excluder_version.stdout }} is higher than the upgrade target version" - when: - - "{{ excluder_version.stdout != '' }}" - - "{{ excluder_version.stdout.split('.')[0:2] | join('.') | version_compare(openshift_upgrade_target.split('.')[0:2] | join('.'), '>', strict=True) }}" - when: - - not openshift.common.is_atomic | bool diff --git a/playbooks/common/openshift-cluster/upgrades/pre/verify_upgrade_targets.yml b/playbooks/common/openshift-cluster/upgrades/pre/verify_upgrade_targets.yml index c83923dae..6a9f88707 100644 --- a/playbooks/common/openshift-cluster/upgrades/pre/verify_upgrade_targets.yml +++ b/playbooks/common/openshift-cluster/upgrades/pre/verify_upgrade_targets.yml @@ -1,21 +1,13 @@ --- - name: Verify upgrade targets hosts: oo_masters_to_config:oo_nodes_to_upgrade - vars: - openshift_docker_hosted_registry_network: "{{ hostvars[groups.oo_first_master.0].openshift.common.portal_net }}" - pre_tasks: - - fail: + + tasks: + - name: Fail when OpenShift is not installed + fail: msg: Verify OpenShift is already installed when: openshift.common.version is not defined - - fail: - msg: Verify the correct version was found - when: verify_upgrade_version is defined and openshift_version != verify_upgrade_version - - - set_fact: - g_new_service_name: "{{ 'origin' if deployment_type =='origin' else 'atomic-openshift' }}" - when: not openshift.common.is_containerized | bool - - name: Verify containers are available for upgrade command: > docker pull {{ openshift.common.cli_image }}:{{ openshift_image_tag }} @@ -23,19 +15,31 @@ changed_when: "'Downloaded newer image' in pull_result.stdout" when: openshift.common.is_containerized | bool - - name: Check latest available OpenShift RPM version - command: > - {{ repoquery_cmd }} --qf '%{version}' "{{ openshift.common.service_type }}" - failed_when: false - changed_when: false - register: avail_openshift_version - when: not openshift.common.is_containerized | bool + - when: not openshift.common.is_containerized | bool + block: + - name: Check latest available OpenShift RPM version + command: > + {{ repoquery_cmd }} --qf '%{version}' "{{ openshift.common.service_type }}" + failed_when: false + changed_when: false + register: avail_openshift_version - - name: Verify OpenShift RPMs are available for upgrade - fail: - msg: "OpenShift {{ avail_openshift_version.stdout }} is available, but {{ openshift_upgrade_target }} or greater is required" - when: not openshift.common.is_containerized | bool and not avail_openshift_version | skipped and avail_openshift_version.stdout | default('0.0', True) | version_compare(openshift_release, '<') + - name: Fail when unable to determine available OpenShift RPM version + fail: + msg: "Unable to determine available OpenShift RPM version" + when: + - avail_openshift_version.stdout == '' - - fail: + - name: Verify OpenShift RPMs are available for upgrade + fail: + msg: "OpenShift {{ avail_openshift_version.stdout }} is available, but {{ openshift_upgrade_target }} or greater is required" + when: + - not avail_openshift_version | skipped + - avail_openshift_version.stdout | default('0.0', True) | version_compare(openshift_release, '<') + + - name: Fail when openshift version does not meet minium requirement for Origin upgrade + fail: msg: "This upgrade playbook must be run against OpenShift {{ openshift_upgrade_min }} or later" - when: deployment_type == 'origin' and openshift.common.version | version_compare(openshift_upgrade_min,'<') + when: + - deployment_type == 'origin' + - openshift.common.version | version_compare(openshift_upgrade_min,'<') diff --git a/playbooks/common/openshift-cluster/upgrades/rpm_upgrade.yml b/playbooks/common/openshift-cluster/upgrades/rpm_upgrade.yml index 03ac02e9f..164baca81 100644 --- a/playbooks/common/openshift-cluster/upgrades/rpm_upgrade.yml +++ b/playbooks/common/openshift-cluster/upgrades/rpm_upgrade.yml @@ -1,27 +1,39 @@ --- -# We verified latest rpm available is suitable, so just yum update. +# When we update package "a-${version}" and a requires b >= ${version} if we +# don't specify the version of b yum will choose the latest version of b +# available and the whole set of dependencies end up at the latest version. +# Since the package module, unlike the yum module, doesn't flatten a list +# of packages into one transaction we need to do that explicitly. The ansible +# core team tells us not to rely on yum module transaction flattening anyway. + +# TODO: If the sdn package isn't already installed this will install it, we +# should fix that -# Master package upgrade ends up depending on node and sdn packages, we need to be explicit -# with all versions to avoid yum from accidentally jumping to something newer than intended: - name: Upgrade master packages - package: name={{ item }} state=present - when: component == "master" - with_items: - - "{{ openshift.common.service_type }}{{ openshift_pkg_version }}" - - "{{ openshift.common.service_type }}-master{{ openshift_pkg_version }}" - - "{{ openshift.common.service_type }}-node{{ openshift_pkg_version }}" - - "{{ openshift.common.service_type }}-sdn-ovs{{ openshift_pkg_version }}" - - "{{ openshift.common.service_type }}-clients{{ openshift_pkg_version }}" + package: name={{ master_pkgs | join(',') }} state=present + vars: + master_pkgs: + - "{{ openshift.common.service_type }}{{ openshift_pkg_version }}" + - "{{ openshift.common.service_type }}-master{{ openshift_pkg_version }}" + - "{{ openshift.common.service_type }}-node{{ openshift_pkg_version }}" + - "{{ openshift.common.service_type }}-sdn-ovs{{ openshift_pkg_version}}" + - "{{ openshift.common.service_type }}-clients{{ openshift_pkg_version }}" + - "tuned-profiles-{{ openshift.common.service_type }}-node{{ openshift_pkg_version }}" + - PyYAML + when: + - component == "master" + - not openshift.common.is_atomic | bool - name: Upgrade node packages - package: name={{ item }} state=present - when: component == "node" - with_items: - - "{{ openshift.common.service_type }}{{ openshift_pkg_version }}" - - "{{ openshift.common.service_type }}-node{{ openshift_pkg_version }}" - - "{{ openshift.common.service_type }}-sdn-ovs{{ openshift_pkg_version }}" - - "{{ openshift.common.service_type }}-clients{{ openshift_pkg_version }}" - -- name: Ensure python-yaml present for config upgrade - package: name=PyYAML state=present - when: not openshift.common.is_atomic | bool + package: name={{ node_pkgs | join(',') }} state=present + vars: + node_pkgs: + - "{{ openshift.common.service_type }}{{ openshift_pkg_version }}" + - "{{ openshift.common.service_type }}-node{{ openshift_pkg_version }}" + - "{{ openshift.common.service_type }}-sdn-ovs{{ openshift_pkg_version }}" + - "{{ openshift.common.service_type }}-clients{{ openshift_pkg_version }}" + - "tuned-profiles-{{ openshift.common.service_type }}-node{{ openshift_pkg_version }}" + - PyYAML + when: + - component == "node" + - not openshift.common.is_atomic | bool diff --git a/playbooks/common/openshift-cluster/upgrades/upgrade_control_plane.yml b/playbooks/common/openshift-cluster/upgrades/upgrade_control_plane.yml index c6e799261..e10c4c540 100644 --- a/playbooks/common/openshift-cluster/upgrades/upgrade_control_plane.yml +++ b/playbooks/common/openshift-cluster/upgrades/upgrade_control_plane.yml @@ -2,17 +2,6 @@ ############################################################################### # Upgrade Masters ############################################################################### -- name: Evaluate additional groups for upgrade - hosts: localhost - connection: local - become: no - tasks: - - name: Evaluate etcd_hosts_to_backup - add_host: - name: "{{ item }}" - groups: etcd_hosts_to_backup - with_items: "{{ groups.oo_etcd_to_config if groups.oo_etcd_to_config is defined and groups.oo_etcd_to_config | length > 0 else groups.oo_first_master }}" - changed_when: False # If facts cache were for some reason deleted, this fact may not be set, and if not set # it will always default to true. This causes problems for the etcd data dir fact detection @@ -118,8 +107,8 @@ yedit: src: "{{ openshift.common.config_base }}/master/master-config.yaml" key: 'imageConfig.format' - value: "{{ oreg_url }}" - when: oreg_url is defined + value: "{{ oreg_url | default(oreg_url_master) }}" + when: oreg_url is defined or oreg_url_master is defined # Run the upgrade hook prior to restarting services/system if defined: - debug: msg="Running master upgrade hook {{ openshift_master_upgrade_hook }}" diff --git a/playbooks/common/openshift-cluster/upgrades/upgrade_nodes.yml b/playbooks/common/openshift-cluster/upgrades/upgrade_nodes.yml index e9f894942..4d455fe0a 100644 --- a/playbooks/common/openshift-cluster/upgrades/upgrade_nodes.yml +++ b/playbooks/common/openshift-cluster/upgrades/upgrade_nodes.yml @@ -34,6 +34,9 @@ - openshift_facts - docker - openshift_node_upgrade + - role: openshift_excluder + r_openshift_excluder_action: enable + r_openshift_excluder_service_type: "{{ openshift.common.service_type }}" post_tasks: - name: Set node schedulability @@ -46,7 +49,3 @@ register: node_schedulable until: node_schedulable|succeeded when: node_unschedulable|changed - -- include: ../reset_excluder.yml - tags: - - always diff --git a/playbooks/common/openshift-cluster/upgrades/upgrade_scheduler.yml b/playbooks/common/openshift-cluster/upgrades/upgrade_scheduler.yml index 88f2ddc78..83d2cec81 100644 --- a/playbooks/common/openshift-cluster/upgrades/upgrade_scheduler.yml +++ b/playbooks/common/openshift-cluster/upgrades/upgrade_scheduler.yml @@ -63,12 +63,12 @@ - block: - debug: msg: "WARNING: openshift_master_scheduler_predicates is set to defaults from an earlier release of OpenShift current defaults are: {{ openshift_master_scheduler_default_predicates }}" - when: "{{ openshift_master_scheduler_predicates in older_predicates + older_predicates_no_region + [prev_predicates] + [prev_predicates_no_region] }}" + when: openshift_master_scheduler_predicates in older_predicates + older_predicates_no_region + [prev_predicates] + [prev_predicates_no_region] - debug: msg: "WARNING: openshift_master_scheduler_predicates does not match current defaults of: {{ openshift_master_scheduler_default_predicates }}" - when: "{{ openshift_master_scheduler_predicates != openshift_master_scheduler_default_predicates }}" - when: "{{ openshift_master_scheduler_predicates | default(none) is not none }}" + when: openshift_master_scheduler_predicates != openshift_master_scheduler_default_predicates + when: openshift_master_scheduler_predicates | default(none) is not none # Handle cases where openshift_master_predicates is not defined - block: @@ -87,7 +87,7 @@ when: "{{ openshift_master_scheduler_current_predicates != default_predicates_no_region and openshift_master_scheduler_current_predicates in older_predicates_no_region + [prev_predicates_no_region] }}" - when: "{{ openshift_master_scheduler_predicates | default(none) is none }}" + when: openshift_master_scheduler_predicates | default(none) is none # Upgrade priorities @@ -120,12 +120,12 @@ - block: - debug: msg: "WARNING: openshift_master_scheduler_priorities is set to defaults from an earlier release of OpenShift current defaults are: {{ openshift_master_scheduler_default_priorities }}" - when: "{{ openshift_master_scheduler_priorities in older_priorities + older_priorities_no_zone + [prev_priorities] + [prev_priorities_no_zone] }}" + when: openshift_master_scheduler_priorities in older_priorities + older_priorities_no_zone + [prev_priorities] + [prev_priorities_no_zone] - debug: msg: "WARNING: openshift_master_scheduler_priorities does not match current defaults of: {{ openshift_master_scheduler_default_priorities }}" - when: "{{ openshift_master_scheduler_priorities != openshift_master_scheduler_default_priorities }}" - when: "{{ openshift_master_scheduler_priorities | default(none) is not none }}" + when: openshift_master_scheduler_priorities != openshift_master_scheduler_default_priorities + when: openshift_master_scheduler_priorities | default(none) is not none # Handle cases where openshift_master_priorities is not defined - block: @@ -144,7 +144,7 @@ when: "{{ openshift_master_scheduler_current_priorities != default_priorities_no_zone and openshift_master_scheduler_current_priorities in older_priorities_no_zone + [prev_priorities_no_zone] }}" - when: "{{ openshift_master_scheduler_priorities | default(none) is none }}" + when: openshift_master_scheduler_priorities | default(none) is none # Update scheduler diff --git a/playbooks/common/openshift-cluster/upgrades/v3_3/master_config_upgrade.yml b/playbooks/common/openshift-cluster/upgrades/v3_3/master_config_upgrade.yml index 68c71a132..d69472fad 100644 --- a/playbooks/common/openshift-cluster/upgrades/v3_3/master_config_upgrade.yml +++ b/playbooks/common/openshift-cluster/upgrades/v3_3/master_config_upgrade.yml @@ -53,7 +53,7 @@ dest: "{{ openshift.common.config_base}}/master/master-config.yaml" yaml_key: 'admissionConfig.pluginConfig' yaml_value: "{{ openshift.master.admission_plugin_config }}" - when: "{{ 'admission_plugin_config' in openshift.master }}" + when: "'admission_plugin_config' in openshift.master" - modify_yaml: dest: "{{ openshift.common.config_base}}/master/master-config.yaml" diff --git a/playbooks/common/openshift-cluster/upgrades/v3_3/roles b/playbooks/common/openshift-cluster/upgrades/v3_3/roles new file mode 120000 index 000000000..6bc1a7aef --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/v3_3/roles @@ -0,0 +1 @@ +../../../../../roles
\ No newline at end of file diff --git a/playbooks/common/openshift-cluster/upgrades/v3_3/upgrade.yml b/playbooks/common/openshift-cluster/upgrades/v3_3/upgrade.yml new file mode 100644 index 000000000..d81a13ef2 --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/v3_3/upgrade.yml @@ -0,0 +1,111 @@ +--- +# +# Full Control Plane + Nodes Upgrade +# +- include: ../init.yml + tags: + - pre_upgrade + +- name: Configure the upgrade target for the common upgrade tasks + hosts: oo_all_hosts + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_upgrade_target: "{{ '1.3' if deployment_type == 'origin' else '3.3' }}" + openshift_upgrade_min: "{{ '1.2' if deployment_type == 'origin' else '3.2' }}" + +# Pre-upgrade + +- include: ../initialize_nodes_to_upgrade.yml + tags: + - pre_upgrade + +- name: Update repos and initialize facts on all hosts + hosts: oo_masters_to_config:oo_nodes_to_upgrade:oo_etcd_to_config:oo_lb_to_config + tags: + - pre_upgrade + roles: + - openshift_repos + +- name: Set openshift_no_proxy_internal_hostnames + hosts: oo_masters_to_config:oo_nodes_to_upgrade + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_no_proxy_internal_hostnames: "{{ hostvars | oo_select_keys(groups['oo_nodes_to_config'] + | union(groups['oo_masters_to_config']) + | union(groups['oo_etcd_to_config'] | default([]))) + | oo_collect('openshift.common.hostname') | default([]) | join (',') + }}" + when: "{{ (openshift_http_proxy is defined or openshift_https_proxy is defined) and + openshift_generate_no_proxy_hosts | default(True) | bool }}" + +- include: ../pre/verify_inventory_vars.yml + tags: + - pre_upgrade + +- include: ../disable_master_excluders.yml + tags: + - pre_upgrade + +- include: ../disable_node_excluders.yml + tags: + - pre_upgrade + +- include: ../../initialize_openshift_version.yml + tags: + - pre_upgrade + vars: + # Request specific openshift_release and let the openshift_version role handle converting this + # to a more specific version, respecting openshift_image_tag and openshift_pkg_version if + # defined, and overriding the normal behavior of protecting the installed version + openshift_release: "{{ openshift_upgrade_target }}" + openshift_protect_installed_version: False + + # We skip the docker role at this point in upgrade to prevent + # unintended package, container, or config upgrades which trigger + # docker restarts. At this early stage of upgrade we can assume + # docker is configured and running. + skip_docker_role: True + +- include: ../pre/verify_control_plane_running.yml + tags: + - pre_upgrade + +- include: ../../../openshift-master/validate_restart.yml + tags: + - pre_upgrade + +- include: ../pre/verify_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/verify_docker_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/gate_checks.yml + tags: + - pre_upgrade + +# Pre-upgrade completed, nothing after this should be tagged pre_upgrade. + +# Separate step so we can execute in parallel and clear out anything unused +# before we get into the serialized upgrade process which will then remove +# remaining images if possible. +- name: Cleanup unused Docker images + hosts: oo_masters_to_config:oo_nodes_to_upgrade:oo_etcd_to_config + tasks: + - include: ../cleanup_unused_images.yml + +- include: ../upgrade_control_plane.yml + vars: + master_config_hook: "v3_3/master_config_upgrade.yml" + +- include: ../upgrade_nodes.yml + vars: + node_config_hook: "v3_3/node_config_upgrade.yml" + +- include: ../post_control_plane.yml diff --git a/playbooks/common/openshift-cluster/upgrades/v3_3/upgrade_control_plane.yml b/playbooks/common/openshift-cluster/upgrades/v3_3/upgrade_control_plane.yml new file mode 100644 index 000000000..8a692d02b --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/v3_3/upgrade_control_plane.yml @@ -0,0 +1,111 @@ +--- +# +# Control Plane Upgrade Playbook +# +# Upgrades masters and Docker (only on standalone etcd hosts) +# +# This upgrade does not include: +# - node service running on masters +# - docker running on masters +# - node service running on dedicated nodes +# +# You can run the upgrade_nodes.yml playbook after this to upgrade these components separately. +# +- include: ../init.yml + tags: + - pre_upgrade + +- name: Configure the upgrade target for the common upgrade tasks + hosts: oo_all_hosts + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_upgrade_target: "{{ '1.3' if deployment_type == 'origin' else '3.3' }}" + openshift_upgrade_min: "{{ '1.2' if deployment_type == 'origin' else '3.2' }}" + +# Pre-upgrade +- include: ../initialize_nodes_to_upgrade.yml + tags: + - pre_upgrade + +- name: Update repos on control plane hosts + hosts: oo_masters_to_config:oo_etcd_to_config:oo_lb_to_config + tags: + - pre_upgrade + roles: + - openshift_repos + +- name: Set openshift_no_proxy_internal_hostnames + hosts: oo_masters_to_config:oo_nodes_to_upgrade + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_no_proxy_internal_hostnames: "{{ hostvars | oo_select_keys(groups['oo_nodes_to_config'] + | union(groups['oo_masters_to_config']) + | union(groups['oo_etcd_to_config'] | default([]))) + | oo_collect('openshift.common.hostname') | default([]) | join (',') + }}" + when: "{{ (openshift_http_proxy is defined or openshift_https_proxy is defined) and + openshift_generate_no_proxy_hosts | default(True) | bool }}" + +- include: ../pre/verify_inventory_vars.yml + tags: + - pre_upgrade + +- include: ../disable_master_excluders.yml + tags: + - pre_upgrade + +- include: ../../initialize_openshift_version.yml + tags: + - pre_upgrade + vars: + # Request specific openshift_release and let the openshift_version role handle converting this + # to a more specific version, respecting openshift_image_tag and openshift_pkg_version if + # defined, and overriding the normal behavior of protecting the installed version + openshift_release: "{{ openshift_upgrade_target }}" + openshift_protect_installed_version: False + + # We skip the docker role at this point in upgrade to prevent + # unintended package, container, or config upgrades which trigger + # docker restarts. At this early stage of upgrade we can assume + # docker is configured and running. + skip_docker_role: True + +- include: ../pre/verify_control_plane_running.yml + tags: + - pre_upgrade + +- include: ../../../openshift-master/validate_restart.yml + tags: + - pre_upgrade + +- include: ../pre/verify_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/verify_docker_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/gate_checks.yml + tags: + - pre_upgrade + +# Pre-upgrade completed, nothing after this should be tagged pre_upgrade. + +# Separate step so we can execute in parallel and clear out anything unused +# before we get into the serialized upgrade process which will then remove +# remaining images if possible. +- name: Cleanup unused Docker images + hosts: oo_masters_to_config:oo_etcd_to_config + tasks: + - include: ../cleanup_unused_images.yml + +- include: ../upgrade_control_plane.yml + vars: + master_config_hook: "v3_3/master_config_upgrade.yml" + +- include: ../post_control_plane.yml diff --git a/playbooks/common/openshift-cluster/upgrades/v3_3/upgrade_nodes.yml b/playbooks/common/openshift-cluster/upgrades/v3_3/upgrade_nodes.yml new file mode 100644 index 000000000..2d30bba94 --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/v3_3/upgrade_nodes.yml @@ -0,0 +1,106 @@ +--- +# +# Node Upgrade Playbook +# +# Upgrades nodes only, but requires the control plane to have already been upgraded. +# +- include: ../init.yml + tags: + - pre_upgrade + +- name: Configure the upgrade target for the common upgrade tasks + hosts: oo_all_hosts + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_upgrade_target: "{{ '1.3' if deployment_type == 'origin' else '3.3' }}" + openshift_upgrade_min: "{{ '1.2' if deployment_type == 'origin' else '3.2' }}" + +# Pre-upgrade +- include: ../initialize_nodes_to_upgrade.yml + tags: + - pre_upgrade + +- name: Update repos on nodes + hosts: oo_masters_to_config:oo_nodes_to_upgrade:oo_etcd_to_config:oo_lb_to_config + roles: + - openshift_repos + tags: + - pre_upgrade + +- name: Set openshift_no_proxy_internal_hostnames + hosts: oo_masters_to_config:oo_nodes_to_upgrade + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_no_proxy_internal_hostnames: "{{ hostvars | oo_select_keys(groups['oo_nodes_to_upgrade'] + | union(groups['oo_masters_to_config']) + | union(groups['oo_etcd_to_config'] | default([]))) + | oo_collect('openshift.common.hostname') | default([]) | join (',') + }}" + when: "{{ (openshift_http_proxy is defined or openshift_https_proxy is defined) and + openshift_generate_no_proxy_hosts | default(True) | bool }}" + +- include: ../pre/verify_inventory_vars.yml + tags: + - pre_upgrade + +- include: ../disable_node_excluders.yml + tags: + - pre_upgrade + +- include: ../../initialize_openshift_version.yml + tags: + - pre_upgrade + vars: + # Request specific openshift_release and let the openshift_version role handle converting this + # to a more specific version, respecting openshift_image_tag and openshift_pkg_version if + # defined, and overriding the normal behavior of protecting the installed version + openshift_release: "{{ openshift_upgrade_target }}" + openshift_protect_installed_version: False + + # We skip the docker role at this point in upgrade to prevent + # unintended package, container, or config upgrades which trigger + # docker restarts. At this early stage of upgrade we can assume + # docker is configured and running. + skip_docker_role: True + +- name: Verify masters are already upgraded + hosts: oo_masters_to_config + tags: + - pre_upgrade + tasks: + - fail: msg="Master running {{ openshift.common.version }} must be upgraded to {{ openshift_version }} before node upgrade can be run." + when: openshift.common.version != openshift_version + +- include: ../pre/verify_control_plane_running.yml + tags: + - pre_upgrade + +- include: ../pre/verify_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/verify_docker_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/gate_checks.yml + tags: + - pre_upgrade + +# Pre-upgrade completed, nothing after this should be tagged pre_upgrade. + +# Separate step so we can execute in parallel and clear out anything unused +# before we get into the serialized upgrade process which will then remove +# remaining images if possible. +- name: Cleanup unused Docker images + hosts: oo_nodes_to_upgrade + tasks: + - include: ../cleanup_unused_images.yml + +- include: ../upgrade_nodes.yml + vars: + node_config_hook: "v3_3/node_config_upgrade.yml" diff --git a/playbooks/common/openshift-cluster/upgrades/v3_4/master_config_upgrade.yml b/playbooks/common/openshift-cluster/upgrades/v3_4/master_config_upgrade.yml index 43c2ffcd4..ed89dbe8d 100644 --- a/playbooks/common/openshift-cluster/upgrades/v3_4/master_config_upgrade.yml +++ b/playbooks/common/openshift-cluster/upgrades/v3_4/master_config_upgrade.yml @@ -3,7 +3,7 @@ dest: "{{ openshift.common.config_base}}/master/master-config.yaml" yaml_key: 'admissionConfig.pluginConfig' yaml_value: "{{ openshift.master.admission_plugin_config }}" - when: "{{ 'admission_plugin_config' in openshift.master }}" + when: "'admission_plugin_config' in openshift.master" - modify_yaml: dest: "{{ openshift.common.config_base}}/master/master-config.yaml" diff --git a/playbooks/common/openshift-cluster/upgrades/v3_4/roles b/playbooks/common/openshift-cluster/upgrades/v3_4/roles new file mode 120000 index 000000000..6bc1a7aef --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/v3_4/roles @@ -0,0 +1 @@ +../../../../../roles
\ No newline at end of file diff --git a/playbooks/common/openshift-cluster/upgrades/v3_4/upgrade.yml b/playbooks/common/openshift-cluster/upgrades/v3_4/upgrade.yml new file mode 100644 index 000000000..e9ff47f32 --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/v3_4/upgrade.yml @@ -0,0 +1,109 @@ +--- +# +# Full Control Plane + Nodes Upgrade +# +- include: ../init.yml + tags: + - pre_upgrade + +- name: Configure the upgrade target for the common upgrade tasks + hosts: oo_all_hosts + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_upgrade_target: "{{ '1.4' if deployment_type == 'origin' else '3.4' }}" + openshift_upgrade_min: "{{ '1.3' if deployment_type == 'origin' else '3.3' }}" + +# Pre-upgrade + +- include: ../initialize_nodes_to_upgrade.yml + tags: + - pre_upgrade + +- name: Update repos and initialize facts on all hosts + hosts: oo_masters_to_config:oo_nodes_to_upgrade:oo_etcd_to_config:oo_lb_to_config + tags: + - pre_upgrade + roles: + - openshift_repos + +- name: Set openshift_no_proxy_internal_hostnames + hosts: oo_masters_to_config:oo_nodes_to_upgrade + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_no_proxy_internal_hostnames: "{{ hostvars | oo_select_keys(groups['oo_nodes_to_config'] + | union(groups['oo_masters_to_config']) + | union(groups['oo_etcd_to_config'] | default([]))) + | oo_collect('openshift.common.hostname') | default([]) | join (',') + }}" + when: "{{ (openshift_http_proxy is defined or openshift_https_proxy is defined) and + openshift_generate_no_proxy_hosts | default(True) | bool }}" + +- include: ../pre/verify_inventory_vars.yml + tags: + - pre_upgrade + +- include: ../disable_master_excluders.yml + tags: + - pre_upgrade + +- include: ../disable_node_excluders.yml + tags: + - pre_upgrade + +- include: ../../initialize_openshift_version.yml + tags: + - pre_upgrade + vars: + # Request specific openshift_release and let the openshift_version role handle converting this + # to a more specific version, respecting openshift_image_tag and openshift_pkg_version if + # defined, and overriding the normal behavior of protecting the installed version + openshift_release: "{{ openshift_upgrade_target }}" + openshift_protect_installed_version: False + + # We skip the docker role at this point in upgrade to prevent + # unintended package, container, or config upgrades which trigger + # docker restarts. At this early stage of upgrade we can assume + # docker is configured and running. + skip_docker_role: True + +- include: ../pre/verify_control_plane_running.yml + tags: + - pre_upgrade + +- include: ../../../openshift-master/validate_restart.yml + tags: + - pre_upgrade + +- include: ../pre/verify_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/verify_docker_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/gate_checks.yml + tags: + - pre_upgrade + +# Pre-upgrade completed, nothing after this should be tagged pre_upgrade. + +# Separate step so we can execute in parallel and clear out anything unused +# before we get into the serialized upgrade process which will then remove +# remaining images if possible. +- name: Cleanup unused Docker images + hosts: oo_masters_to_config:oo_nodes_to_upgrade:oo_etcd_to_config + tasks: + - include: ../cleanup_unused_images.yml + +- include: ../upgrade_control_plane.yml + vars: + master_config_hook: "v3_4/master_config_upgrade.yml" + +- include: ../upgrade_nodes.yml + +- include: ../post_control_plane.yml diff --git a/playbooks/common/openshift-cluster/upgrades/v3_4/upgrade_control_plane.yml b/playbooks/common/openshift-cluster/upgrades/v3_4/upgrade_control_plane.yml new file mode 100644 index 000000000..d4ae8d8b4 --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/v3_4/upgrade_control_plane.yml @@ -0,0 +1,111 @@ +--- +# +# Control Plane Upgrade Playbook +# +# Upgrades masters and Docker (only on standalone etcd hosts) +# +# This upgrade does not include: +# - node service running on masters +# - docker running on masters +# - node service running on dedicated nodes +# +# You can run the upgrade_nodes.yml playbook after this to upgrade these components separately. +# +- include: ../init.yml + tags: + - pre_upgrade + +- name: Configure the upgrade target for the common upgrade tasks + hosts: oo_all_hosts + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_upgrade_target: "{{ '1.4' if deployment_type == 'origin' else '3.4' }}" + openshift_upgrade_min: "{{ '1.3' if deployment_type == 'origin' else '3.3' }}" + +# Pre-upgrade +- include: ../initialize_nodes_to_upgrade.yml + tags: + - pre_upgrade + +- name: Update repos on control plane hosts + hosts: oo_masters_to_config:oo_etcd_to_config:oo_lb_to_config + tags: + - pre_upgrade + roles: + - openshift_repos + +- name: Set openshift_no_proxy_internal_hostnames + hosts: oo_masters_to_config:oo_nodes_to_upgrade + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_no_proxy_internal_hostnames: "{{ hostvars | oo_select_keys(groups['oo_nodes_to_config'] + | union(groups['oo_masters_to_config']) + | union(groups['oo_etcd_to_config'] | default([]))) + | oo_collect('openshift.common.hostname') | default([]) | join (',') + }}" + when: "{{ (openshift_http_proxy is defined or openshift_https_proxy is defined) and + openshift_generate_no_proxy_hosts | default(True) | bool }}" + +- include: ../pre/verify_inventory_vars.yml + tags: + - pre_upgrade + +- include: ../disable_master_excluders.yml + tags: + - pre_upgrade + +- include: ../../initialize_openshift_version.yml + tags: + - pre_upgrade + vars: + # Request specific openshift_release and let the openshift_version role handle converting this + # to a more specific version, respecting openshift_image_tag and openshift_pkg_version if + # defined, and overriding the normal behavior of protecting the installed version + openshift_release: "{{ openshift_upgrade_target }}" + openshift_protect_installed_version: False + + # We skip the docker role at this point in upgrade to prevent + # unintended package, container, or config upgrades which trigger + # docker restarts. At this early stage of upgrade we can assume + # docker is configured and running. + skip_docker_role: True + +- include: ../pre/verify_control_plane_running.yml + tags: + - pre_upgrade + +- include: ../../../openshift-master/validate_restart.yml + tags: + - pre_upgrade + +- include: ../pre/verify_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/verify_docker_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/gate_checks.yml + tags: + - pre_upgrade + +# Pre-upgrade completed, nothing after this should be tagged pre_upgrade. + +# Separate step so we can execute in parallel and clear out anything unused +# before we get into the serialized upgrade process which will then remove +# remaining images if possible. +- name: Cleanup unused Docker images + hosts: oo_masters_to_config:oo_etcd_to_config + tasks: + - include: ../cleanup_unused_images.yml + +- include: ../upgrade_control_plane.yml + vars: + master_config_hook: "v3_4/master_config_upgrade.yml" + +- include: ../post_control_plane.yml diff --git a/playbooks/common/openshift-cluster/upgrades/v3_4/upgrade_nodes.yml b/playbooks/common/openshift-cluster/upgrades/v3_4/upgrade_nodes.yml new file mode 100644 index 000000000..ae205b172 --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/v3_4/upgrade_nodes.yml @@ -0,0 +1,104 @@ +--- +# +# Node Upgrade Playbook +# +# Upgrades nodes only, but requires the control plane to have already been upgraded. +# +- include: ../init.yml + tags: + - pre_upgrade + +- name: Configure the upgrade target for the common upgrade tasks + hosts: oo_all_hosts + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_upgrade_target: "{{ '1.4' if deployment_type == 'origin' else '3.4' }}" + openshift_upgrade_min: "{{ '1.3' if deployment_type == 'origin' else '3.3' }}" + +# Pre-upgrade +- include: ../initialize_nodes_to_upgrade.yml + tags: + - pre_upgrade + +- name: Update repos on nodes + hosts: oo_masters_to_config:oo_nodes_to_upgrade:oo_etcd_to_config:oo_lb_to_config + roles: + - openshift_repos + tags: + - pre_upgrade + +- name: Set openshift_no_proxy_internal_hostnames + hosts: oo_masters_to_config:oo_nodes_to_upgrade + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_no_proxy_internal_hostnames: "{{ hostvars | oo_select_keys(groups['oo_nodes_to_upgrade'] + | union(groups['oo_masters_to_config']) + | union(groups['oo_etcd_to_config'] | default([]))) + | oo_collect('openshift.common.hostname') | default([]) | join (',') + }}" + when: "{{ (openshift_http_proxy is defined or openshift_https_proxy is defined) and + openshift_generate_no_proxy_hosts | default(True) | bool }}" + +- include: ../pre/verify_inventory_vars.yml + tags: + - pre_upgrade + +- include: ../disable_node_excluders.yml + tags: + - pre_upgrade + +- include: ../../initialize_openshift_version.yml + tags: + - pre_upgrade + vars: + # Request specific openshift_release and let the openshift_version role handle converting this + # to a more specific version, respecting openshift_image_tag and openshift_pkg_version if + # defined, and overriding the normal behavior of protecting the installed version + openshift_release: "{{ openshift_upgrade_target }}" + openshift_protect_installed_version: False + + # We skip the docker role at this point in upgrade to prevent + # unintended package, container, or config upgrades which trigger + # docker restarts. At this early stage of upgrade we can assume + # docker is configured and running. + skip_docker_role: True + +- name: Verify masters are already upgraded + hosts: oo_masters_to_config + tags: + - pre_upgrade + tasks: + - fail: msg="Master running {{ openshift.common.version }} must be upgraded to {{ openshift_version }} before node upgrade can be run." + when: openshift.common.version != openshift_version + +- include: ../pre/verify_control_plane_running.yml + tags: + - pre_upgrade + +- include: ../pre/verify_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/verify_docker_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/gate_checks.yml + tags: + - pre_upgrade + +# Pre-upgrade completed, nothing after this should be tagged pre_upgrade. + +# Separate step so we can execute in parallel and clear out anything unused +# before we get into the serialized upgrade process which will then remove +# remaining images if possible. +- name: Cleanup unused Docker images + hosts: oo_nodes_to_upgrade + tasks: + - include: ../cleanup_unused_images.yml + +- include: ../upgrade_nodes.yml diff --git a/playbooks/common/openshift-cluster/upgrades/v3_5/upgrade.yml b/playbooks/common/openshift-cluster/upgrades/v3_5/upgrade.yml new file mode 100644 index 000000000..1269634d1 --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/v3_5/upgrade.yml @@ -0,0 +1,113 @@ +--- +# +# Full Control Plane + Nodes Upgrade +# +- include: ../init.yml + tags: + - pre_upgrade + +- name: Configure the upgrade target for the common upgrade tasks + hosts: oo_all_hosts + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_upgrade_target: "{{ '1.5' if deployment_type == 'origin' else '3.5' }}" + openshift_upgrade_min: "{{ '1.4' if deployment_type == 'origin' else '3.4' }}" + +# Pre-upgrade + +- include: ../initialize_nodes_to_upgrade.yml + tags: + - pre_upgrade + +- name: Update repos and initialize facts on all hosts + hosts: oo_masters_to_config:oo_nodes_to_upgrade:oo_etcd_to_config:oo_lb_to_config + tags: + - pre_upgrade + roles: + - openshift_repos + +- name: Set openshift_no_proxy_internal_hostnames + hosts: oo_masters_to_config:oo_nodes_to_upgrade + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_no_proxy_internal_hostnames: "{{ hostvars | oo_select_keys(groups['oo_nodes_to_config'] + | union(groups['oo_masters_to_config']) + | union(groups['oo_etcd_to_config'] | default([]))) + | oo_collect('openshift.common.hostname') | default([]) | join (',') + }}" + when: "{{ (openshift_http_proxy is defined or openshift_https_proxy is defined) and + openshift_generate_no_proxy_hosts | default(True) | bool }}" + +- include: ../pre/verify_inventory_vars.yml + tags: + - pre_upgrade + +- include: ../disable_master_excluders.yml + tags: + - pre_upgrade + +- include: ../disable_node_excluders.yml + tags: + - pre_upgrade + +- include: ../../initialize_openshift_version.yml + tags: + - pre_upgrade + vars: + # Request specific openshift_release and let the openshift_version role handle converting this + # to a more specific version, respecting openshift_image_tag and openshift_pkg_version if + # defined, and overriding the normal behavior of protecting the installed version + openshift_release: "{{ openshift_upgrade_target }}" + openshift_protect_installed_version: False + + # We skip the docker role at this point in upgrade to prevent + # unintended package, container, or config upgrades which trigger + # docker restarts. At this early stage of upgrade we can assume + # docker is configured and running. + skip_docker_role: True + +- include: ../pre/verify_control_plane_running.yml + tags: + - pre_upgrade + +- include: ../../../openshift-master/validate_restart.yml + tags: + - pre_upgrade + +- include: ../pre/verify_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/verify_docker_upgrade_targets.yml + tags: + - pre_upgrade + +- include: validator.yml + tags: + - pre_upgrade + +- include: ../pre/gate_checks.yml + tags: + - pre_upgrade + +# Pre-upgrade completed, nothing after this should be tagged pre_upgrade. + +# Separate step so we can execute in parallel and clear out anything unused +# before we get into the serialized upgrade process which will then remove +# remaining images if possible. +- name: Cleanup unused Docker images + hosts: oo_masters_to_config:oo_nodes_to_upgrade:oo_etcd_to_config + tasks: + - include: ../cleanup_unused_images.yml + +- include: ../upgrade_control_plane.yml + +- include: ../upgrade_nodes.yml + +- include: ../post_control_plane.yml + +- include: storage_upgrade.yml diff --git a/playbooks/common/openshift-cluster/upgrades/v3_5/upgrade_control_plane.yml b/playbooks/common/openshift-cluster/upgrades/v3_5/upgrade_control_plane.yml new file mode 100644 index 000000000..21c075678 --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/v3_5/upgrade_control_plane.yml @@ -0,0 +1,115 @@ +--- +# +# Control Plane Upgrade Playbook +# +# Upgrades masters and Docker (only on standalone etcd hosts) +# +# This upgrade does not include: +# - node service running on masters +# - docker running on masters +# - node service running on dedicated nodes +# +# You can run the upgrade_nodes.yml playbook after this to upgrade these components separately. +# +- include: ../init.yml + tags: + - pre_upgrade + +- name: Configure the upgrade target for the common upgrade tasks + hosts: oo_all_hosts + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_upgrade_target: "{{ '1.5' if deployment_type == 'origin' else '3.5' }}" + openshift_upgrade_min: "{{ '1.4' if deployment_type == 'origin' else '3.4' }}" + +# Pre-upgrade +- include: ../initialize_nodes_to_upgrade.yml + tags: + - pre_upgrade + +- name: Update repos on control plane hosts + hosts: oo_masters_to_config:oo_etcd_to_config:oo_lb_to_config + tags: + - pre_upgrade + roles: + - openshift_repos + +- name: Set openshift_no_proxy_internal_hostnames + hosts: oo_masters_to_config:oo_nodes_to_upgrade + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_no_proxy_internal_hostnames: "{{ hostvars | oo_select_keys(groups['oo_nodes_to_config'] + | union(groups['oo_masters_to_config']) + | union(groups['oo_etcd_to_config'] | default([]))) + | oo_collect('openshift.common.hostname') | default([]) | join (',') + }}" + when: "{{ (openshift_http_proxy is defined or openshift_https_proxy is defined) and + openshift_generate_no_proxy_hosts | default(True) | bool }}" + +- include: ../pre/verify_inventory_vars.yml + tags: + - pre_upgrade + +- include: ../disable_master_excluders.yml + tags: + - pre_upgrade + +- include: ../../initialize_openshift_version.yml + tags: + - pre_upgrade + vars: + # Request specific openshift_release and let the openshift_version role handle converting this + # to a more specific version, respecting openshift_image_tag and openshift_pkg_version if + # defined, and overriding the normal behavior of protecting the installed version + openshift_release: "{{ openshift_upgrade_target }}" + openshift_protect_installed_version: False + + # We skip the docker role at this point in upgrade to prevent + # unintended package, container, or config upgrades which trigger + # docker restarts. At this early stage of upgrade we can assume + # docker is configured and running. + skip_docker_role: True + +- include: ../pre/verify_control_plane_running.yml + tags: + - pre_upgrade + +- include: ../../../openshift-master/validate_restart.yml + tags: + - pre_upgrade + +- include: ../pre/verify_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/verify_docker_upgrade_targets.yml + tags: + - pre_upgrade + +- include: validator.yml + tags: + - pre_upgrade + +- include: ../pre/gate_checks.yml + tags: + - pre_upgrade + +# Pre-upgrade completed, nothing after this should be tagged pre_upgrade. + +# Separate step so we can execute in parallel and clear out anything unused +# before we get into the serialized upgrade process which will then remove +# remaining images if possible. +- name: Cleanup unused Docker images + hosts: oo_masters_to_config:oo_etcd_to_config + tasks: + - include: ../cleanup_unused_images.yml + +- include: ../upgrade_control_plane.yml + +- include: ../post_control_plane.yml + +- include: storage_upgrade.yml diff --git a/playbooks/common/openshift-cluster/upgrades/v3_5/upgrade_nodes.yml b/playbooks/common/openshift-cluster/upgrades/v3_5/upgrade_nodes.yml new file mode 100644 index 000000000..e67e169fc --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/v3_5/upgrade_nodes.yml @@ -0,0 +1,104 @@ +--- +# +# Node Upgrade Playbook +# +# Upgrades nodes only, but requires the control plane to have already been upgraded. +# +- include: ../init.yml + tags: + - pre_upgrade + +- name: Configure the upgrade target for the common upgrade tasks + hosts: oo_all_hosts + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_upgrade_target: "{{ '1.5' if deployment_type == 'origin' else '3.5' }}" + openshift_upgrade_min: "{{ '1.4' if deployment_type == 'origin' else '3.4' }}" + +# Pre-upgrade +- include: ../initialize_nodes_to_upgrade.yml + tags: + - pre_upgrade + +- name: Update repos on nodes + hosts: oo_masters_to_config:oo_nodes_to_upgrade:oo_etcd_to_config:oo_lb_to_config + roles: + - openshift_repos + tags: + - pre_upgrade + +- name: Set openshift_no_proxy_internal_hostnames + hosts: oo_masters_to_config:oo_nodes_to_upgrade + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_no_proxy_internal_hostnames: "{{ hostvars | oo_select_keys(groups['oo_nodes_to_upgrade'] + | union(groups['oo_masters_to_config']) + | union(groups['oo_etcd_to_config'] | default([]))) + | oo_collect('openshift.common.hostname') | default([]) | join (',') + }}" + when: "{{ (openshift_http_proxy is defined or openshift_https_proxy is defined) and + openshift_generate_no_proxy_hosts | default(True) | bool }}" + +- include: ../pre/verify_inventory_vars.yml + tags: + - pre_upgrade + +- include: ../disable_node_excluders.yml + tags: + - pre_upgrade + +- include: ../../initialize_openshift_version.yml + tags: + - pre_upgrade + vars: + # Request specific openshift_release and let the openshift_version role handle converting this + # to a more specific version, respecting openshift_image_tag and openshift_pkg_version if + # defined, and overriding the normal behavior of protecting the installed version + openshift_release: "{{ openshift_upgrade_target }}" + openshift_protect_installed_version: False + + # We skip the docker role at this point in upgrade to prevent + # unintended package, container, or config upgrades which trigger + # docker restarts. At this early stage of upgrade we can assume + # docker is configured and running. + skip_docker_role: True + +- name: Verify masters are already upgraded + hosts: oo_masters_to_config + tags: + - pre_upgrade + tasks: + - fail: msg="Master running {{ openshift.common.version }} must be upgraded to {{ openshift_version }} before node upgrade can be run." + when: openshift.common.version != openshift_version + +- include: ../pre/verify_control_plane_running.yml + tags: + - pre_upgrade + +- include: ../pre/verify_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/verify_docker_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/gate_checks.yml + tags: + - pre_upgrade + +# Pre-upgrade completed, nothing after this should be tagged pre_upgrade. + +# Separate step so we can execute in parallel and clear out anything unused +# before we get into the serialized upgrade process which will then remove +# remaining images if possible. +- name: Cleanup unused Docker images + hosts: oo_nodes_to_upgrade + tasks: + - include: ../cleanup_unused_images.yml + +- include: ../upgrade_nodes.yml diff --git a/playbooks/common/openshift-cluster/upgrades/v3_6/upgrade.yml b/playbooks/common/openshift-cluster/upgrades/v3_6/upgrade.yml new file mode 100644 index 000000000..a1b1f3301 --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/v3_6/upgrade.yml @@ -0,0 +1,113 @@ +--- +# +# Full Control Plane + Nodes Upgrade +# +- include: ../init.yml + tags: + - pre_upgrade + +- name: Configure the upgrade target for the common upgrade tasks + hosts: oo_all_hosts + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_upgrade_target: '3.6' + openshift_upgrade_min: "{{ '1.5' if deployment_type == 'origin' else '3.5' }}" + +# Pre-upgrade + +- include: ../initialize_nodes_to_upgrade.yml + tags: + - pre_upgrade + +- name: Update repos and initialize facts on all hosts + hosts: oo_masters_to_config:oo_nodes_to_upgrade:oo_etcd_to_config:oo_lb_to_config + tags: + - pre_upgrade + roles: + - openshift_repos + +- name: Set openshift_no_proxy_internal_hostnames + hosts: oo_masters_to_config:oo_nodes_to_upgrade + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_no_proxy_internal_hostnames: "{{ hostvars | oo_select_keys(groups['oo_nodes_to_config'] + | union(groups['oo_masters_to_config']) + | union(groups['oo_etcd_to_config'] | default([]))) + | oo_collect('openshift.common.hostname') | default([]) | join (',') + }}" + when: "{{ (openshift_http_proxy is defined or openshift_https_proxy is defined) and + openshift_generate_no_proxy_hosts | default(True) | bool }}" + +- include: ../pre/verify_inventory_vars.yml + tags: + - pre_upgrade + +- include: ../disable_master_excluders.yml + tags: + - pre_upgrade + +- include: ../disable_node_excluders.yml + tags: + - pre_upgrade + +- include: ../../initialize_openshift_version.yml + tags: + - pre_upgrade + vars: + # Request specific openshift_release and let the openshift_version role handle converting this + # to a more specific version, respecting openshift_image_tag and openshift_pkg_version if + # defined, and overriding the normal behavior of protecting the installed version + openshift_release: "{{ openshift_upgrade_target }}" + openshift_protect_installed_version: False + + # We skip the docker role at this point in upgrade to prevent + # unintended package, container, or config upgrades which trigger + # docker restarts. At this early stage of upgrade we can assume + # docker is configured and running. + skip_docker_role: True + +- include: ../pre/verify_control_plane_running.yml + tags: + - pre_upgrade + +- include: ../../../openshift-master/validate_restart.yml + tags: + - pre_upgrade + +- include: ../pre/verify_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/verify_docker_upgrade_targets.yml + tags: + - pre_upgrade + +- include: validator.yml + tags: + - pre_upgrade + +- include: ../pre/gate_checks.yml + tags: + - pre_upgrade + +# Pre-upgrade completed, nothing after this should be tagged pre_upgrade. + +# Separate step so we can execute in parallel and clear out anything unused +# before we get into the serialized upgrade process which will then remove +# remaining images if possible. +- name: Cleanup unused Docker images + hosts: oo_masters_to_config:oo_nodes_to_upgrade:oo_etcd_to_config + tasks: + - include: ../cleanup_unused_images.yml + +- include: ../upgrade_control_plane.yml + +- include: ../upgrade_nodes.yml + +- include: ../post_control_plane.yml + +- include: storage_upgrade.yml diff --git a/playbooks/common/openshift-cluster/upgrades/v3_6/upgrade_control_plane.yml b/playbooks/common/openshift-cluster/upgrades/v3_6/upgrade_control_plane.yml new file mode 100644 index 000000000..af6e1f71b --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/v3_6/upgrade_control_plane.yml @@ -0,0 +1,115 @@ +--- +# +# Control Plane Upgrade Playbook +# +# Upgrades masters and Docker (only on standalone etcd hosts) +# +# This upgrade does not include: +# - node service running on masters +# - docker running on masters +# - node service running on dedicated nodes +# +# You can run the upgrade_nodes.yml playbook after this to upgrade these components separately. +# +- include: ../init.yml + tags: + - pre_upgrade + +- name: Configure the upgrade target for the common upgrade tasks + hosts: oo_all_hosts + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_upgrade_target: '3.6' + openshift_upgrade_min: "{{ '1.5' if deployment_type == 'origin' else '3.5' }}" + +# Pre-upgrade +- include: ../initialize_nodes_to_upgrade.yml + tags: + - pre_upgrade + +- name: Update repos on control plane hosts + hosts: oo_masters_to_config:oo_etcd_to_config:oo_lb_to_config + tags: + - pre_upgrade + roles: + - openshift_repos + +- name: Set openshift_no_proxy_internal_hostnames + hosts: oo_masters_to_config:oo_nodes_to_upgrade + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_no_proxy_internal_hostnames: "{{ hostvars | oo_select_keys(groups['oo_nodes_to_config'] + | union(groups['oo_masters_to_config']) + | union(groups['oo_etcd_to_config'] | default([]))) + | oo_collect('openshift.common.hostname') | default([]) | join (',') + }}" + when: "{{ (openshift_http_proxy is defined or openshift_https_proxy is defined) and + openshift_generate_no_proxy_hosts | default(True) | bool }}" + +- include: ../pre/verify_inventory_vars.yml + tags: + - pre_upgrade + +- include: ../disable_master_excluders.yml + tags: + - pre_upgrade + +- include: ../../initialize_openshift_version.yml + tags: + - pre_upgrade + vars: + # Request specific openshift_release and let the openshift_version role handle converting this + # to a more specific version, respecting openshift_image_tag and openshift_pkg_version if + # defined, and overriding the normal behavior of protecting the installed version + openshift_release: "{{ openshift_upgrade_target }}" + openshift_protect_installed_version: False + + # We skip the docker role at this point in upgrade to prevent + # unintended package, container, or config upgrades which trigger + # docker restarts. At this early stage of upgrade we can assume + # docker is configured and running. + skip_docker_role: True + +- include: ../pre/verify_control_plane_running.yml + tags: + - pre_upgrade + +- include: ../../../openshift-master/validate_restart.yml + tags: + - pre_upgrade + +- include: ../pre/verify_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/verify_docker_upgrade_targets.yml + tags: + - pre_upgrade + +- include: validator.yml + tags: + - pre_upgrade + +- include: ../pre/gate_checks.yml + tags: + - pre_upgrade + +# Pre-upgrade completed, nothing after this should be tagged pre_upgrade. + +# Separate step so we can execute in parallel and clear out anything unused +# before we get into the serialized upgrade process which will then remove +# remaining images if possible. +- name: Cleanup unused Docker images + hosts: oo_masters_to_config:oo_etcd_to_config + tasks: + - include: ../cleanup_unused_images.yml + +- include: ../upgrade_control_plane.yml + +- include: ../post_control_plane.yml + +- include: storage_upgrade.yml diff --git a/playbooks/common/openshift-cluster/upgrades/v3_6/upgrade_nodes.yml b/playbooks/common/openshift-cluster/upgrades/v3_6/upgrade_nodes.yml new file mode 100644 index 000000000..285c18b7b --- /dev/null +++ b/playbooks/common/openshift-cluster/upgrades/v3_6/upgrade_nodes.yml @@ -0,0 +1,104 @@ +--- +# +# Node Upgrade Playbook +# +# Upgrades nodes only, but requires the control plane to have already been upgraded. +# +- include: ../init.yml + tags: + - pre_upgrade + +- name: Configure the upgrade target for the common upgrade tasks + hosts: oo_all_hosts + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_upgrade_target: '3.6' + openshift_upgrade_min: "{{ '1.5' if deployment_type == 'origin' else '3.5' }}" + +# Pre-upgrade +- include: ../initialize_nodes_to_upgrade.yml + tags: + - pre_upgrade + +- name: Update repos on nodes + hosts: oo_masters_to_config:oo_nodes_to_upgrade:oo_etcd_to_config:oo_lb_to_config + roles: + - openshift_repos + tags: + - pre_upgrade + +- name: Set openshift_no_proxy_internal_hostnames + hosts: oo_masters_to_config:oo_nodes_to_upgrade + tags: + - pre_upgrade + tasks: + - set_fact: + openshift_no_proxy_internal_hostnames: "{{ hostvars | oo_select_keys(groups['oo_nodes_to_upgrade'] + | union(groups['oo_masters_to_config']) + | union(groups['oo_etcd_to_config'] | default([]))) + | oo_collect('openshift.common.hostname') | default([]) | join (',') + }}" + when: "{{ (openshift_http_proxy is defined or openshift_https_proxy is defined) and + openshift_generate_no_proxy_hosts | default(True) | bool }}" + +- include: ../pre/verify_inventory_vars.yml + tags: + - pre_upgrade + +- include: ../disable_node_excluders.yml + tags: + - pre_upgrade + +- include: ../../initialize_openshift_version.yml + tags: + - pre_upgrade + vars: + # Request specific openshift_release and let the openshift_version role handle converting this + # to a more specific version, respecting openshift_image_tag and openshift_pkg_version if + # defined, and overriding the normal behavior of protecting the installed version + openshift_release: "{{ openshift_upgrade_target }}" + openshift_protect_installed_version: False + + # We skip the docker role at this point in upgrade to prevent + # unintended package, container, or config upgrades which trigger + # docker restarts. At this early stage of upgrade we can assume + # docker is configured and running. + skip_docker_role: True + +- name: Verify masters are already upgraded + hosts: oo_masters_to_config + tags: + - pre_upgrade + tasks: + - fail: msg="Master running {{ openshift.common.version }} must be upgraded to {{ openshift_version }} before node upgrade can be run." + when: openshift.common.version != openshift_version + +- include: ../pre/verify_control_plane_running.yml + tags: + - pre_upgrade + +- include: ../pre/verify_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/verify_docker_upgrade_targets.yml + tags: + - pre_upgrade + +- include: ../pre/gate_checks.yml + tags: + - pre_upgrade + +# Pre-upgrade completed, nothing after this should be tagged pre_upgrade. + +# Separate step so we can execute in parallel and clear out anything unused +# before we get into the serialized upgrade process which will then remove +# remaining images if possible. +- name: Cleanup unused Docker images + hosts: oo_nodes_to_upgrade + tasks: + - include: ../cleanup_unused_images.yml + +- include: ../upgrade_nodes.yml diff --git a/playbooks/common/openshift-cluster/upgrades/v3_6/validator.yml b/playbooks/common/openshift-cluster/upgrades/v3_6/validator.yml index ac5704f69..78c1767b8 100644 --- a/playbooks/common/openshift-cluster/upgrades/v3_6/validator.yml +++ b/playbooks/common/openshift-cluster/upgrades/v3_6/validator.yml @@ -7,4 +7,6 @@ hosts: oo_first_master roles: - { role: lib_openshift } - tasks: [] + tasks: + - name: Check for invalid namespaces and SDN errors + oc_objectvalidator: diff --git a/playbooks/common/openshift-cluster/validate_hostnames.yml b/playbooks/common/openshift-cluster/validate_hostnames.yml index 48cc03b19..33fc5630f 100644 --- a/playbooks/common/openshift-cluster/validate_hostnames.yml +++ b/playbooks/common/openshift-cluster/validate_hostnames.yml @@ -13,4 +13,6 @@ pause: prompt: "The hostname \"{{ openshift.common.hostname }}\" for \"{{ ansible_nodename }}\" doesn't resolve to an ip address owned by this host. Please set openshift_hostname variable to a hostname that when resolved on the host in question resolves to an IP address matching an interface on this host. This host will fail liveness checks for pods utilizing hostPorts, press ENTER to continue or CTRL-C to abort." seconds: "{{ 10 if openshift_override_hostname_check | default(false) | bool else omit }}" - when: lookupip.stdout not in ansible_all_ipv4_addresses + when: + - lookupip.stdout != '127.0.0.1' + - lookupip.stdout not in ansible_all_ipv4_addresses |