diff options
Diffstat (limited to 'playbooks/aws')
21 files changed, 538 insertions, 895 deletions
diff --git a/playbooks/aws/README.md b/playbooks/aws/README.md index 99698b4d0..2b3d4329e 100644 --- a/playbooks/aws/README.md +++ b/playbooks/aws/README.md @@ -1,4 +1,256 @@ # AWS playbooks -This playbook directory is meant to be driven by [`bin/cluster`](../../bin), -which is community supported and most use is considered deprecated. +## Provisioning + +With recent desire for provisioning from customers and developers alike, the AWS + playbook directory now supports a limited set of ansible playbooks to achieve a + complete cluster setup. These playbooks bring into alignment our desire to + deploy highly scalable Openshift clusters utilizing AWS auto scale groups and + custom AMIs. + +### Where do I start? + +Before any provisioning may occur, AWS account credentials must be present in the environment. This can be done in two ways: + +- Create the following file `~/.aws/credentials` with the contents (substitute your access key and secret key): + ``` + [myaccount] + aws_access_key_id = <Your access_key here> + aws_secret_access_key = <Your secret acces key here> + ``` + From the shell: + ``` + $ export AWS_PROFILE=myaccount + ``` + --- +- Alternatively to using a profile you can export your AWS credentials as environment variables. + ``` + $ export AWS_ACCESS_KEY_ID=AKIXXXXXX + $ export AWS_SECRET_ACCESS_KEY=XXXXXX + ``` + +### Let's Provision! + +The newly added playbooks are the following: +- build_ami.yml - Builds a custom AMI. This currently requires the user to supply a valid AMI with access to repositories that contain openshift repositories. +- provision.yml - Create a vpc, elbs, security groups, launch config, asg's, etc. +- install.yml - Calls the openshift-ansible installer on the newly created instances +- provision_nodes.yml - Creates the infra and compute node scale groups +- accept.yml - This is a playbook to accept infra and compute nodes into the cluster +- provision_install.yml - This is a combination of all 3 of the above playbooks. (provision, install, and provision_nodes as well as accept.yml) + +The current expected work flow should be to provide an AMI with access to Openshift repositories. There should be a repository specified in the `openshift_additional_repos` parameter of the inventory file. The next expectation is a minimal set of values in the `provisioning_vars.yml` file to configure the desired settings for cluster instances. These settings are AWS specific and should be tailored to the consumer's AWS custom account settings. + +```yaml +--- +# when creating an AMI set this to True +# when installing a cluster set this to False +openshift_node_bootstrap: True + +# specify a clusterid +# openshift_aws_clusterid: default + +# specify a region +# openshift_aws_region: us-east-1 + +# must specify a base_ami when building an AMI +# openshift_aws_base_ami: # base image for AMI to build from +# specify when using a custom AMI +# openshift_aws_ami: + +# when creating an encrypted AMI please specify use_encryption +# openshift_aws_ami_encrypt: False + +# custom certificates are required for the ELB +# openshift_aws_iam_cert_path: '/path/to/cert/wildcard.<clusterid>.<domain>.com.crt' +# openshift_aws_iam_cert_key_path: '/path/to/key/wildcard.<clusterid>.<domain>.com.key' +# openshift_aws_iam_cert_chain_path: '/path/to/ca_cert_file/ca.crt' + +# This is required for any ec2 instances +# openshift_aws_ssh_key_name: myuser_key + +# This will ensure these users are created +#openshift_aws_users: +#- key_name: myuser_key +# username: myuser +# pub_key: | +# ssh-rsa AAAA +``` + +If customization is required for the instances, scale groups, or any other configurable option please see the ['openshift_aws/defaults/main.yml'](../../roles/openshift_aws/defaults/main.yml) for variables and overrides. These overrides can be placed in the `provisioning_vars.yml`, `inventory`, or `group_vars`. + +In order to create the bootstrap-able AMI we need to create an openshift-ansible inventory file. This file enables us to create the AMI using the openshift-ansible node roles. The exception here is that there will be no hosts specified by the inventory file. Here is an example: + +```ini +[OSEv3:children] +masters +nodes +etcd + +[OSEv3:children] +masters +nodes +etcd + +[OSEv3:vars] +################################################################################ +# Ensure these variables are set for bootstrap +################################################################################ +# openshift_deployment_type is required for installation +openshift_deployment_type=origin + +# required when building an AMI. This will +# be dependent on the version provided by the yum repository +openshift_pkg_version=-3.6.0 + +openshift_master_bootstrap_enabled=True + +openshift_hosted_router_wait=False +openshift_hosted_registry_wait=False + +# Repository for installation +openshift_additional_repos=[{'name': 'openshift-repo', 'id': 'openshift-repo', 'baseurl': 'https://mirror.openshift.com/enterprise/enterprise-3.6/latest/x86_64/os/', 'enabled': 'yes', 'gpgcheck': 0, 'sslverify': 'no', 'sslclientcert': '/var/lib/yum/client-cert.pem', 'sslclientkey': '/var/lib/yum/client-key.pem', 'gpgkey': 'https://mirror.ops.rhcloud.com/libra/keys/RPM-GPG-KEY-redhat-release https://mirror.ops.rhcloud.com/libra/keys/RPM-GPG-KEY-redhat-beta https://mirror.ops.rhcloud.com/libra/keys/RPM-GPG-KEY-redhat-openshifthosted'}] + +################################################################################ +# cluster specific settings maybe be placed here + +[masters] + +[etcd] + +[nodes] +``` + +There are more examples of cluster inventory settings [`here`](../../inventory/byo/). + +#### Step 1 + +Once the `inventory` and the `provisioning_vars.yml` file has been updated with the correct settings for the desired AWS account then we are ready to build an AMI. + +``` +$ ansible-playbook -i inventory.yml build_ami.yml -e @provisioning_vars.yml +``` + +1. This script will build a VPC. Default name will be clusterid if not specified. +2. Create an ssh key required for the instance. +3. Create a security group. +4. Create an instance using the key from step 2 or a specified key. +5. Run openshift-ansible setup roles to ensure packages and services are correctly configured. +6. Create the AMI. +7. If encryption is desired + - A KMS key is created with the name of $clusterid + - An encrypted AMI will be produced with $clusterid KMS key +8. Terminate the instance used to configure the AMI. + +More AMI specific options can be found in ['openshift_aws/defaults/main.yml'](../../roles/openshift_aws/defaults/main.yml). When creating an encrypted AMI please specify use_encryption: +``` +# openshift_aws_ami_encrypt: True # defaults to false +``` + +**Note**: This will ensure to take the recently created AMI and encrypt it to be used later. If encryption is not desired then set the value to false (defaults to false). The AMI id will be fetched and used according to its most recent creation date. + +#### Step 2 + +Now that we have created an AMI for our Openshift installation, there are two ways to use the AMI. + +1. In the default behavior, the AMI id will be found and used in the last created fashion. +2. The `openshift_aws_ami` option can be specified. This will allow the user to override the behavior of the role and use a custom AMI specified in the `openshift_aws_ami` variable. + +We are now ready to provision and install the cluster. This can be accomplished by calling all of the following steps at once or one-by-one. The all in one can be called like this: +``` +$ ansible-playbook -i inventory.yml provision_install.yml -e @provisioning_vars.yml +``` + +If this is the first time running through this process, please attempt the following steps one-by-one and ensure the setup works correctly. + +#### Step 3 + +We are ready to create the master instances. + +``` +$ ansible-playbook provision.yml -e @provisioning_vars.yml +``` + +This playbook runs through the following steps: +1. Ensures a VPC is created. +2. Ensures a SSH key exists. +3. Creates an s3 bucket for the registry named $clusterid-docker-registry +4. Create master security groups. +5. Create a master launch config. +6. Create the master auto scaling groups. +7. If certificates are desired for ELB, they will be uploaded. +8. Create internal and external master ELBs. +9. Add newly created masters to the correct groups. +10. Set a couple of important facts for the masters. + +At this point we have successfully created the infrastructure including the master nodes. + +#### Step 4 + +Now it is time to install Openshift using the openshift-ansible installer. This can be achieved by running the following playbook: + +``` +$ ansible-playbook -i inventory.yml install.yml @provisioning_vars.yml +``` +This playbook accomplishes the following: +1. Builds a dynamic inventory file by querying AWS. +2. Runs the [`byo`](../../common/openshift-cluster/config.yml) + +Once this playbook completes, the cluster masters should be installed and configured. + +#### Step 5 + +Now that we have a cluster deployed it will be more interesting to create some node types. This can be done easily with the following playbook: + +``` +$ ansible-playbook provision_nodes.yml -e @provisioning_vars.yml +``` + +Once this playbook completes, it should create the compute and infra node scale groups. These nodes will attempt to register themselves to the cluster. These requests must be approved by an administrator. + +#### Step 6 + +To facilitate the node registration process, nodes may be registered by running the following script `accept.yml`. This script can register in a few different ways. +- approve_all - **Note**: this option is for development and test environments. Security is bypassed +- nodes - A list of node names that will be accepted into the cluster + +```yaml + oc_adm_csr: + #approve_all: True + nodes: < list of nodes here > + timeout: 0 +``` + +Once the desired accept method is chosen, run the following playbook `accept.yml`: +1. Run the following playbook. +``` +$ ansible-playbook accept.yml -e @provisioning_vars.yml +``` + +Login to a master and run the following command: +``` +ssh root@<master ip address> +$ oc --config=/etc/origin/master/admin.kubeconfig get csr +node-bootstrapper-client-ip-172-31-49-148-ec2-internal 1h system:serviceaccount:openshift-infra:node-bootstrapper Approved,Issued +node-bootstrapper-server-ip-172-31-49-148-ec2-internal 1h system:node:ip-172-31-49-148.ec2.internal Approved,Issued +``` + +Verify the `CONDITION` is `Approved,Issued` on the `csr` objects. There are two for each node required. +1. `node-bootstrapper-client` is a request to access the api/controllers. +2. `node-bootstrapper-server` is a request to join the cluster. + +Once this is complete, verify the nodes have joined the cluster and are `ready`. + +``` +$ oc --config=/etc/origin/master/admin.kubeconfig get nodes +NAME STATUS AGE VERSION +ip-172-31-49-148.ec2.internal Ready 1h v1.6.1+5115d708d7 +``` + +### Ready To Work! + +At this point your cluster should be ready for workloads. Proceed to deploy applications on your cluster. + +### Still to come + +There are more enhancements that are arriving for provisioning. These will include more playbooks that enhance the provisioning capabilities. diff --git a/playbooks/aws/openshift-cluster/accept.yml b/playbooks/aws/openshift-cluster/accept.yml new file mode 100755 index 000000000..ffc367f9f --- /dev/null +++ b/playbooks/aws/openshift-cluster/accept.yml @@ -0,0 +1,53 @@ +#!/usr/bin/ansible-playbook +--- +- name: Setup the vpc and the master node group + hosts: localhost + remote_user: root + gather_facts: no + tasks: + - name: Alert user to variables needed - clusterid + debug: + msg: "openshift_aws_clusterid={{ openshift_aws_clusterid | default('default') }}" + + - name: Alert user to variables needed - region + debug: + msg: "openshift_aws_region={{ openshift_aws_region | default('us-east-1') }}" + + - name: bring lib_openshift into scope + include_role: + name: lib_openshift + + - name: fetch masters + ec2_remote_facts: + region: "{{ openshift_aws_region | default('us-east-1') }}" + filters: + "tag:clusterid": "{{ openshift_aws_clusterid | default('default') }}" + "tag:host-type": master + instance-state-name: running + register: mastersout + retries: 20 + delay: 3 + until: "'instances' in mastersout and mastersout.instances|length > 0" + + - name: fetch new node instances + ec2_remote_facts: + region: "{{ openshift_aws_region | default('us-east-1') }}" + filters: + "tag:clusterid": "{{ openshift_aws_clusterid | default('default') }}" + "tag:host-type": node + instance-state-name: running + register: instancesout + retries: 20 + delay: 3 + until: "'instances' in instancesout and instancesout.instances|length > 0" + + - debug: + msg: "{{ instancesout.instances|map(attribute='private_dns_name') | list | regex_replace('.ec2.internal') }}" + + - name: approve nodes + oc_adm_csr: + #approve_all: True + nodes: "{{ instancesout.instances|map(attribute='private_dns_name') | list | regex_replace('.ec2.internal') }}" + timeout: 0 + register: nodeout + delegate_to: "{{ mastersout.instances[0].public_ip_address }}" diff --git a/playbooks/aws/openshift-cluster/add_nodes.yml b/playbooks/aws/openshift-cluster/add_nodes.yml deleted file mode 100644 index 0e8eb90c1..000000000 --- a/playbooks/aws/openshift-cluster/add_nodes.yml +++ /dev/null @@ -1,35 +0,0 @@ ---- -- name: Launch instance(s) - hosts: localhost - connection: local - become: no - gather_facts: no - vars_files: - - vars.yml - vars: - oo_extend_env: True - tasks: - - include: ../../common/openshift-cluster/tasks/set_node_launch_facts.yml - vars: - type: "compute" - count: "{{ num_nodes }}" - - include: tasks/launch_instances.yml - vars: - instances: "{{ node_names }}" - cluster: "{{ cluster_id }}" - type: "{{ k8s_type }}" - g_sub_host_type: "{{ sub_host_type }}" - - - include: ../../common/openshift-cluster/tasks/set_node_launch_facts.yml - vars: - type: "infra" - count: "{{ num_infra }}" - - include: tasks/launch_instances.yml - vars: - instances: "{{ node_names }}" - cluster: "{{ cluster_id }}" - type: "{{ k8s_type }}" - g_sub_host_type: "{{ sub_host_type }}" - -- include: scaleup.yml -- include: list.yml diff --git a/playbooks/aws/openshift-cluster/build_ami.yml b/playbooks/aws/openshift-cluster/build_ami.yml new file mode 100644 index 000000000..fc11205d8 --- /dev/null +++ b/playbooks/aws/openshift-cluster/build_ami.yml @@ -0,0 +1,78 @@ +--- +- hosts: localhost + connection: local + gather_facts: no + tasks: + - name: Require openshift_aws_base_ami + fail: + msg: "A base AMI is required for AMI building. Please ensure `openshift_aws_base_ami` is defined." + when: openshift_aws_base_ami is undefined + + - name: "Alert user to variables needed and their values - {{ item.name }}" + debug: + msg: "{{ item.msg }}" + with_items: + - name: openshift_aws_clusterid + msg: "openshift_aws_clusterid={{ openshift_aws_clusterid | default('default') }}" + - name: openshift_aws_region + msg: "openshift_aws_region={{ openshift_aws_region | default('us-east-1') }}" + + - name: create an instance and prepare for ami + include_role: + name: openshift_aws + tasks_from: build_ami.yml + vars: + openshift_aws_node_group_type: compute + + - name: fetch newly created instances + ec2_remote_facts: + region: "{{ openshift_aws_region | default('us-east-1') }}" + filters: + "tag:Name": "{{ openshift_aws_base_ami_name | default('ami_base') }}" + instance-state-name: running + register: instancesout + retries: 20 + delay: 3 + until: instancesout.instances|length > 0 + + - name: wait for ssh to become available + wait_for: + port: 22 + host: "{{ instancesout.instances[0].public_ip_address }}" + timeout: 300 + search_regex: OpenSSH + + - name: add host to nodes + add_host: + groups: nodes + name: "{{ instancesout.instances[0].public_dns_name }}" + + - name: set the user to perform installation + set_fact: + ansible_ssh_user: root + +- name: normalize groups + include: ../../byo/openshift-cluster/initialize_groups.yml + +- name: run the std_include + include: ../../common/openshift-cluster/evaluate_groups.yml + +- name: run the std_include + include: ../../common/openshift-cluster/initialize_facts.yml + +- name: run the std_include + include: ../../common/openshift-cluster/initialize_openshift_repos.yml + +- name: install node config + include: ../../common/openshift-node/config.yml + +- hosts: localhost + connection: local + become: no + tasks: + - name: seal the ami + include_role: + name: openshift_aws + tasks_from: seal_ami.yml + vars: + openshift_aws_ami_name: "openshift-gi-{{ lookup('pipe', 'date +%Y%m%d%H%M')}}" diff --git a/playbooks/aws/openshift-cluster/cluster_hosts.yml b/playbooks/aws/openshift-cluster/cluster_hosts.yml deleted file mode 100644 index 119df9c7d..000000000 --- a/playbooks/aws/openshift-cluster/cluster_hosts.yml +++ /dev/null @@ -1,23 +0,0 @@ ---- -g_all_hosts: "{{ groups['tag_clusterid_' ~ cluster_id] | default([]) - | intersect(groups['tag_environment_' ~ cluster_env] | default([])) }}" - -g_etcd_hosts: "{{ g_all_hosts | intersect(groups['tag_host-type_etcd'] | default([])) }}" - -g_lb_hosts: "{{ g_all_hosts | intersect(groups['tag_host-type_lb'] | default([])) }}" - -g_nfs_hosts: "{{ g_all_hosts | intersect(groups['tag_host-type_nfs'] | default([])) }}" - -g_glusterfs_hosts: "{{ g_all_hosts | intersect(groups['tag_host-type-glusterfs'] | default([])) }}" - -g_master_hosts: "{{ g_all_hosts | intersect(groups['tag_host-type_master'] | default([])) }}" - -g_new_master_hosts: "{{ g_all_hosts | intersect(groups['tag_host-type_new_master'] | default([])) }}" - -g_node_hosts: "{{ g_all_hosts | intersect(groups['tag_host-type_node'] | default([])) }}" - -g_new_node_hosts: "{{ g_all_hosts | intersect(groups['tag_host-type_new_node'] | default([])) }}" - -g_infra_hosts: "{{ g_node_hosts | intersect(groups['tag_sub-host-type_infra'] | default([])) }}" - -g_compute_hosts: "{{ g_node_hosts | intersect(groups['tag_sub-host-type_compute'] | default([])) }}" diff --git a/playbooks/aws/openshift-cluster/config.yml b/playbooks/aws/openshift-cluster/config.yml deleted file mode 100644 index 8d64b0521..000000000 --- a/playbooks/aws/openshift-cluster/config.yml +++ /dev/null @@ -1,38 +0,0 @@ ---- -- hosts: localhost - gather_facts: no - tasks: - - include_vars: vars.yml - - include_vars: cluster_hosts.yml - - add_host: - name: "{{ item }}" - groups: l_oo_all_hosts - with_items: "{{ g_all_hosts | default([]) }}" - -- hosts: l_oo_all_hosts - gather_facts: no - tasks: - - include_vars: vars.yml - - include_vars: cluster_hosts.yml - -- include: ../../common/openshift-cluster/config.yml - vars: - g_ssh_user: "{{ deployment_vars[deployment_type].ssh_user }}" - g_sudo: "{{ deployment_vars[deployment_type].become }}" - g_nodeonmaster: true - openshift_cluster_id: "{{ cluster_id }}" - openshift_debug_level: "{{ debug_level }}" - openshift_deployment_type: "{{ deployment_type }}" - openshift_public_hostname: "{{ ec2_ip_address }}" - openshift_hosted_registry_selector: 'type=infra' - openshift_hosted_router_selector: 'type=infra' - openshift_node_labels: - region: "{{ deployment_vars[deployment_type].region }}" - type: "{{ hostvars[inventory_hostname]['ec2_tag_sub-host-type'] }}" - openshift_master_cluster_method: 'native' - openshift_use_openshift_sdn: "{{ lookup('oo_option', 'use_openshift_sdn') }}" - os_sdn_network_plugin_name: "{{ lookup('oo_option', 'sdn_network_plugin_name') }}" - openshift_use_flannel: "{{ lookup('oo_option', 'use_flannel') }}" - openshift_use_calico: "{{ lookup('oo_option', 'use_calico') }}" - openshift_use_fluentd: "{{ lookup('oo_option', 'use_fluentd') }}" - openshift_use_dnsmasq: false diff --git a/playbooks/aws/openshift-cluster/install.yml b/playbooks/aws/openshift-cluster/install.yml new file mode 100644 index 000000000..86d58a68e --- /dev/null +++ b/playbooks/aws/openshift-cluster/install.yml @@ -0,0 +1,74 @@ +--- +- name: Setup the vpc and the master node group + hosts: localhost + tasks: + - name: Alert user to variables needed - clusterid + debug: + msg: "openshift_aws_clusterid={{ openshift_aws_clusterid | default('default') }}" + + - name: Alert user to variables needed - region + debug: + msg: "openshift_aws_region={{ openshift_aws_region | default('us-east-1') }}" + + - name: fetch newly created instances + ec2_remote_facts: + region: "{{ openshift_aws_region | default('us-east-1') }}" + filters: + "tag:clusterid": "{{ openshift_aws_clusterid | default('default') }}" + "tag:host-type": master + instance-state-name: running + register: instancesout + retries: 20 + delay: 3 + until: instancesout.instances|length > 0 + + - name: add new master to masters group + add_host: + groups: "masters,etcd,nodes" + name: "{{ item.public_ip_address }}" + hostname: "{{ openshift_aws_clusterid | default('default') }}-master-{{ item.id[:-5] }}" + with_items: "{{ instancesout.instances }}" + + - name: wait for ssh to become available + wait_for: + port: 22 + host: "{{ item.public_ip_address }}" + timeout: 300 + search_regex: OpenSSH + with_items: "{{ instancesout.instances }}" + +- name: set the master facts for hostname to elb + hosts: masters + gather_facts: no + remote_user: root + tasks: + - name: fetch elbs + ec2_elb_facts: + region: "{{ openshift_aws_region | default('us-east-1') }}" + names: + - "{{ item }}" + with_items: + - "{{ openshift_aws_clusterid | default('default') }}-master-external" + - "{{ openshift_aws_clusterid | default('default') }}-master-internal" + delegate_to: localhost + register: elbs + + - debug: var=elbs + + - name: set fact + set_fact: + openshift_master_cluster_hostname: "{{ elbs.results[1].elbs[0].dns_name }}" + osm_custom_cors_origins: + - "{{ elbs.results[1].elbs[0].dns_name }}" + - "console.{{ openshift_aws_clusterid | default('default') }}.openshift.com" + - "api.{{ openshift_aws_clusterid | default('default') }}.openshift.com" + with_items: "{{ groups['masters'] }}" + +- name: normalize groups + include: ../../byo/openshift-cluster/initialize_groups.yml + +- name: run the std_include + include: ../../common/openshift-cluster/std_include.yml + +- name: run the config + include: ../../common/openshift-cluster/config.yml diff --git a/playbooks/aws/openshift-cluster/launch.yml b/playbooks/aws/openshift-cluster/launch.yml deleted file mode 100644 index 3edace493..000000000 --- a/playbooks/aws/openshift-cluster/launch.yml +++ /dev/null @@ -1,54 +0,0 @@ ---- -- name: Launch instance(s) - hosts: localhost - connection: local - become: no - gather_facts: no - vars_files: - - vars.yml - tasks: - - include: ../../common/openshift-cluster/tasks/set_etcd_launch_facts.yml - - include: tasks/launch_instances.yml - vars: - instances: "{{ etcd_names }}" - cluster: "{{ cluster_id }}" - type: "{{ k8s_type }}" - g_sub_host_type: "default" - - - include: ../../common/openshift-cluster/tasks/set_master_launch_facts.yml - - include: tasks/launch_instances.yml - vars: - instances: "{{ master_names }}" - cluster: "{{ cluster_id }}" - type: "{{ k8s_type }}" - g_sub_host_type: "default" - - - include: ../../common/openshift-cluster/tasks/set_node_launch_facts.yml - vars: - type: "compute" - count: "{{ num_nodes }}" - - include: tasks/launch_instances.yml - vars: - instances: "{{ node_names }}" - cluster: "{{ cluster_id }}" - type: "{{ k8s_type }}" - g_sub_host_type: "{{ sub_host_type }}" - - - include: ../../common/openshift-cluster/tasks/set_node_launch_facts.yml - vars: - type: "infra" - count: "{{ num_infra }}" - - include: tasks/launch_instances.yml - vars: - instances: "{{ node_names }}" - cluster: "{{ cluster_id }}" - type: "{{ k8s_type }}" - g_sub_host_type: "{{ sub_host_type }}" - - - add_host: - name: "{{ master_names.0 }}" - groups: service_master - when: master_names is defined and master_names.0 is defined - -- include: update.yml -- include: list.yml diff --git a/playbooks/aws/openshift-cluster/library/ec2_ami_find.py b/playbooks/aws/openshift-cluster/library/ec2_ami_find.py deleted file mode 100644 index 99d0f44f0..000000000 --- a/playbooks/aws/openshift-cluster/library/ec2_ami_find.py +++ /dev/null @@ -1,303 +0,0 @@ -#!/usr/bin/python -#pylint: skip-file -# flake8: noqa -# -# This file is part of Ansible -# -# Ansible is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# Ansible is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with Ansible. If not, see <http://www.gnu.org/licenses/>. - -DOCUMENTATION = ''' ---- -module: ec2_ami_find -version_added: 2.0 -short_description: Searches for AMIs to obtain the AMI ID and other information -description: - - Returns list of matching AMIs with AMI ID, along with other useful information - - Can search AMIs with different owners - - Can search by matching tag(s), by AMI name and/or other criteria - - Results can be sorted and sliced -author: Tom Bamford -notes: - - This module is not backwards compatible with the previous version of the ec2_search_ami module which worked only for Ubuntu AMIs listed on cloud-images.ubuntu.com. - - See the example below for a suggestion of how to search by distro/release. -options: - region: - description: - - The AWS region to use. - required: true - aliases: [ 'aws_region', 'ec2_region' ] - owner: - description: - - Search AMIs owned by the specified owner - - Can specify an AWS account ID, or one of the special IDs 'self', 'amazon' or 'aws-marketplace' - - If not specified, all EC2 AMIs in the specified region will be searched. - - You can include wildcards in many of the search options. An asterisk (*) matches zero or more characters, and a question mark (?) matches exactly one character. You can escape special characters using a backslash (\) before the character. For example, a value of \*amazon\?\\ searches for the literal string *amazon?\. - required: false - default: null - ami_id: - description: - - An AMI ID to match. - default: null - required: false - ami_tags: - description: - - A hash/dictionary of tags to match for the AMI. - default: null - required: false - architecture: - description: - - An architecture type to match (e.g. x86_64). - default: null - required: false - hypervisor: - description: - - A hypervisor type type to match (e.g. xen). - default: null - required: false - is_public: - description: - - Whether or not the image(s) are public. - choices: ['yes', 'no'] - default: null - required: false - name: - description: - - An AMI name to match. - default: null - required: false - platform: - description: - - Platform type to match. - default: null - required: false - sort: - description: - - Optional attribute which with to sort the results. - - If specifying 'tag', the 'tag_name' parameter is required. - choices: ['name', 'description', 'tag'] - default: null - required: false - sort_tag: - description: - - Tag name with which to sort results. - - Required when specifying 'sort=tag'. - default: null - required: false - sort_order: - description: - - Order in which to sort results. - - Only used when the 'sort' parameter is specified. - choices: ['ascending', 'descending'] - default: 'ascending' - required: false - sort_start: - description: - - Which result to start with (when sorting). - - Corresponds to Python slice notation. - default: null - required: false - sort_end: - description: - - Which result to end with (when sorting). - - Corresponds to Python slice notation. - default: null - required: false - state: - description: - - AMI state to match. - default: 'available' - required: false - virtualization_type: - description: - - Virtualization type to match (e.g. hvm). - default: null - required: false - no_result_action: - description: - - What to do when no results are found. - - "'success' reports success and returns an empty array" - - "'fail' causes the module to report failure" - choices: ['success', 'fail'] - default: 'success' - required: false -requirements: - - boto - -''' - -EXAMPLES = ''' -# Note: These examples do not set authentication details, see the AWS Guide for details. - -# Search for the AMI tagged "project:website" -- ec2_ami_find: - owner: self - tags: - project: website - no_result_action: fail - register: ami_find - -# Search for the latest Ubuntu 14.04 AMI -- ec2_ami_find: - name: "ubuntu/images/ebs/ubuntu-trusty-14.04-amd64-server-*" - owner: 099720109477 - sort: name - sort_order: descending - sort_end: 1 - register: ami_find - -# Launch an EC2 instance -- ec2: - image: "{{ ami_search.results[0].ami_id }}" - instance_type: m4.medium - key_name: mykey - wait: yes -''' - -try: - import boto.ec2 - HAS_BOTO=True -except ImportError: - HAS_BOTO=False - -import json - -def main(): - argument_spec = ec2_argument_spec() - argument_spec.update(dict( - region = dict(required=True, - aliases = ['aws_region', 'ec2_region']), - owner = dict(required=False, default=None), - ami_id = dict(required=False), - ami_tags = dict(required=False, type='dict', - aliases = ['search_tags', 'image_tags']), - architecture = dict(required=False), - hypervisor = dict(required=False), - is_public = dict(required=False), - name = dict(required=False), - platform = dict(required=False), - sort = dict(required=False, default=None, - choices=['name', 'description', 'tag']), - sort_tag = dict(required=False), - sort_order = dict(required=False, default='ascending', - choices=['ascending', 'descending']), - sort_start = dict(required=False), - sort_end = dict(required=False), - state = dict(required=False, default='available'), - virtualization_type = dict(required=False), - no_result_action = dict(required=False, default='success', - choices = ['success', 'fail']), - ) - ) - - module = AnsibleModule( - argument_spec=argument_spec, - ) - - if not HAS_BOTO: - module.fail_json(msg='boto required for this module, install via pip or your package manager') - - ami_id = module.params.get('ami_id') - ami_tags = module.params.get('ami_tags') - architecture = module.params.get('architecture') - hypervisor = module.params.get('hypervisor') - is_public = module.params.get('is_public') - name = module.params.get('name') - owner = module.params.get('owner') - platform = module.params.get('platform') - sort = module.params.get('sort') - sort_tag = module.params.get('sort_tag') - sort_order = module.params.get('sort_order') - sort_start = module.params.get('sort_start') - sort_end = module.params.get('sort_end') - state = module.params.get('state') - virtualization_type = module.params.get('virtualization_type') - no_result_action = module.params.get('no_result_action') - - filter = {'state': state} - - if ami_id: - filter['image_id'] = ami_id - if ami_tags: - for tag in ami_tags: - filter['tag:'+tag] = ami_tags[tag] - if architecture: - filter['architecture'] = architecture - if hypervisor: - filter['hypervisor'] = hypervisor - if is_public: - filter['is_public'] = is_public - if name: - filter['name'] = name - if platform: - filter['platform'] = platform - if virtualization_type: - filter['virtualization_type'] = virtualization_type - - ec2 = ec2_connect(module) - - images_result = ec2.get_all_images(owners=owner, filters=filter) - - if no_result_action == 'fail' and len(images_result) == 0: - module.fail_json(msg="No AMIs matched the attributes: %s" % json.dumps(filter)) - - results = [] - for image in images_result: - data = { - 'ami_id': image.id, - 'architecture': image.architecture, - 'description': image.description, - 'is_public': image.is_public, - 'name': image.name, - 'owner_id': image.owner_id, - 'platform': image.platform, - 'root_device_name': image.root_device_name, - 'root_device_type': image.root_device_type, - 'state': image.state, - 'tags': image.tags, - 'virtualization_type': image.virtualization_type, - } - - if image.kernel_id: - data['kernel_id'] = image.kernel_id - if image.ramdisk_id: - data['ramdisk_id'] = image.ramdisk_id - - results.append(data) - - if sort == 'tag': - if not sort_tag: - module.fail_json(msg="'sort_tag' option must be given with 'sort=tag'") - results.sort(key=lambda e: e['tags'][sort_tag], reverse=(sort_order=='descending')) - elif sort: - results.sort(key=lambda e: e[sort], reverse=(sort_order=='descending')) - - try: - if sort and sort_start and sort_end: - results = results[int(sort_start):int(sort_end)] - elif sort and sort_start: - results = results[int(sort_start):] - elif sort and sort_end: - results = results[:int(sort_end)] - except TypeError: - module.fail_json(msg="Please supply numeric values for sort_start and/or sort_end") - - module.exit_json(results=results) - -# import module snippets -from ansible.module_utils.basic import * -from ansible.module_utils.ec2 import * - -if __name__ == '__main__': - main() - diff --git a/playbooks/aws/openshift-cluster/list.yml b/playbooks/aws/openshift-cluster/list.yml deleted file mode 100644 index ed8aac398..000000000 --- a/playbooks/aws/openshift-cluster/list.yml +++ /dev/null @@ -1,23 +0,0 @@ ---- -- name: Generate oo_list_hosts group - hosts: localhost - gather_facts: no - connection: local - become: no - vars_files: - - vars.yml - tasks: - - set_fact: scratch_group=tag_clusterid_{{ cluster_id }} - when: cluster_id != '' - - set_fact: scratch_group=all - when: cluster_id == '' - - add_host: - name: "{{ item }}" - groups: oo_list_hosts - ansible_ssh_user: "{{ deployment_vars[deployment_type].ssh_user }}" - ansible_become: "{{ deployment_vars[deployment_type].become }}" - oo_public_ipv4: "{{ hostvars[item].ec2_ip_address }}" - oo_private_ipv4: "{{ hostvars[item].ec2_private_ip_address }}" - with_items: "{{ groups[scratch_group] | default([]) | difference(['localhost']) }}" - - debug: - msg: "{{ hostvars | oo_select_keys(groups[scratch_group] | default([])) | oo_pretty_print_cluster }}" diff --git a/playbooks/aws/openshift-cluster/provision.yml b/playbooks/aws/openshift-cluster/provision.yml new file mode 100644 index 000000000..db7afac6f --- /dev/null +++ b/playbooks/aws/openshift-cluster/provision.yml @@ -0,0 +1,17 @@ +--- +- name: Setup the vpc and the master node group + hosts: localhost + tasks: + + - name: Alert user to variables needed - clusterid + debug: + msg: "openshift_aws_clusterid={{ openshift_aws_clusterid | default('default') }}" + + - name: Alert user to variables needed - region + debug: + msg: "openshift_aws_region={{ openshift_aws_region | default('us-east-1') }}" + + - name: create default vpc + include_role: + name: openshift_aws + tasks_from: provision.yml diff --git a/playbooks/aws/openshift-cluster/provision_install.yml b/playbooks/aws/openshift-cluster/provision_install.yml new file mode 100644 index 000000000..e787deced --- /dev/null +++ b/playbooks/aws/openshift-cluster/provision_install.yml @@ -0,0 +1,16 @@ +--- +# Once an AMI is built then this script is used for +# the one stop shop to provision and install a cluster +# this playbook is run with the following parameters: +# ansible-playbook -i openshift-ansible-inventory provision_install.yml +- name: Include the provision.yml playbook to create cluster + include: provision.yml + +- name: Include the install.yml playbook to install cluster + include: install.yml + +- name: Include the install.yml playbook to install cluster + include: provision_nodes.yml + +- name: Include the accept.yml playbook to accept nodes into the cluster + include: accept.yml diff --git a/playbooks/aws/openshift-cluster/provision_nodes.yml b/playbooks/aws/openshift-cluster/provision_nodes.yml new file mode 100644 index 000000000..44c686e08 --- /dev/null +++ b/playbooks/aws/openshift-cluster/provision_nodes.yml @@ -0,0 +1,18 @@ +--- +- name: create the node scale groups + hosts: localhost + connection: local + gather_facts: yes + tasks: + - name: Alert user to variables needed - clusterid + debug: + msg: "openshift_aws_clusterid={{ openshift_aws_clusterid | default('default') }}" + + - name: Alert user to variables needed - region + debug: + msg: "openshift_aws_region={{ openshift_aws_region | default('us-east-1') }}" + + - name: create the node groups + include_role: + name: openshift_aws + tasks_from: provision_nodes.yml diff --git a/playbooks/aws/openshift-cluster/provisioning_vars.example.yml b/playbooks/aws/openshift-cluster/provisioning_vars.example.yml new file mode 100644 index 000000000..28eb9c993 --- /dev/null +++ b/playbooks/aws/openshift-cluster/provisioning_vars.example.yml @@ -0,0 +1,28 @@ +--- +# when creating an AMI set this option to True +# when installing the cluster, set this to False +openshift_node_bootstrap: True + +# specify a clusterid +#openshift_aws_clusterid: default + +# must specify a base_ami when building an AMI +#openshift_aws_base_ami: + +# when creating an encrypted AMI please specify use_encryption +#openshift_aws_ami_encrypt: False + +# custom certificates are required for the ELB +#openshift_aws_iam_cert_path: '/path/to/wildcard.<clusterid>.example.com.crt' +#openshift_aws_iam_key_path: '/path/to/wildcard.<clusterid>.example.com.key' +#openshift_aws_iam_cert_chain_path: '/path/to/cert.ca.crt' + +# This is required for any ec2 instances +#openshift_aws_ssh_key_name: myuser_key + +# This will ensure these users are created +#openshift_aws_users: +#- key_name: myuser_key +# username: myuser +# pub_key: | +# ssh-rsa AAAA diff --git a/playbooks/aws/openshift-cluster/scaleup.yml b/playbooks/aws/openshift-cluster/scaleup.yml deleted file mode 100644 index 6fa9142a0..000000000 --- a/playbooks/aws/openshift-cluster/scaleup.yml +++ /dev/null @@ -1,32 +0,0 @@ ---- - -- hosts: localhost - gather_facts: no - connection: local - become: no - vars_files: - - vars.yml - tasks: - - name: Evaluate oo_hosts_to_update - add_host: - name: "{{ item }}" - groups: oo_hosts_to_update - ansible_ssh_user: "{{ deployment_vars[deployment_type].ssh_user }}" - ansible_become: "{{ deployment_vars[deployment_type].become }}" - with_items: "{{ groups.nodes_to_add }}" - -- include: ../../common/openshift-cluster/update_repos_and_packages.yml - -- include: ../../common/openshift-cluster/scaleup.yml - vars_files: - - ../../aws/openshift-cluster/vars.yml - - ../../aws/openshift-cluster/cluster_hosts.yml - vars: - g_new_node_hosts: "{{ groups.nodes_to_add }}" - g_ssh_user: "{{ deployment_vars[deployment_type].ssh_user }}" - g_sudo: "{{ deployment_vars[deployment_type].become }}" - g_nodeonmaster: true - openshift_cluster_id: "{{ cluster_id }}" - openshift_debug_level: "{{ debug_level }}" - openshift_deployment_type: "{{ deployment_type }}" - openshift_public_hostname: "{{ ec2_ip_address }}" diff --git a/playbooks/aws/openshift-cluster/service.yml b/playbooks/aws/openshift-cluster/service.yml deleted file mode 100644 index f7f4812bb..000000000 --- a/playbooks/aws/openshift-cluster/service.yml +++ /dev/null @@ -1,31 +0,0 @@ ---- -- name: Call same systemctl command for openshift on all instance(s) - hosts: localhost - connection: local - become: no - gather_facts: no - vars_files: - - vars.yml - - cluster_hosts.yml - tasks: - - fail: msg="cluster_id is required to be injected in this playbook" - when: cluster_id is not defined - - - name: Evaluate g_service_masters - add_host: - name: "{{ item }}" - groups: g_service_masters - ansible_ssh_user: "{{ deployment_vars[deployment_type].ssh_user }}" - ansible_become: "{{ deployment_vars[deployment_type].become }}" - with_items: "{{ master_hosts | default([]) }}" - - - name: Evaluate g_service_nodes - add_host: - name: "{{ item }}" - groups: g_service_nodes - ansible_ssh_user: "{{ deployment_vars[deployment_type].ssh_user }}" - ansible_become: "{{ deployment_vars[deployment_type].become }}" - with_items: "{{ node_hosts | default([]) }}" - -- include: ../../common/openshift-node/service.yml -- include: ../../common/openshift-master/service.yml diff --git a/playbooks/aws/openshift-cluster/tasks/launch_instances.yml b/playbooks/aws/openshift-cluster/tasks/launch_instances.yml deleted file mode 100644 index 608512b79..000000000 --- a/playbooks/aws/openshift-cluster/tasks/launch_instances.yml +++ /dev/null @@ -1,188 +0,0 @@ ---- -- set_fact: - created_by: "{{ lookup('env', 'LOGNAME')|default(cluster, true) }}" - docker_vol_ephemeral: "{{ lookup('env', 'os_docker_vol_ephemeral') | default(false, true) }}" - cluster: "{{ cluster_id }}" - env: "{{ cluster_env }}" - host_type: "{{ type }}" - sub_host_type: "{{ g_sub_host_type }}" - -- set_fact: - ec2_instance_type: "{{ lookup('env', 'ec2_master_instance_type') | default(deployment_vars[deployment_type].type, true) }}" - ec2_security_groups: "{{ lookup('env', 'ec2_master_security_groups') | default(deployment_vars[deployment_type].security_groups, true) }}" - when: host_type == "master" and sub_host_type == "default" - -- set_fact: - ec2_instance_type: "{{ lookup('env', 'ec2_etcd_instance_type') | default(deployment_vars[deployment_type].type, true) }}" - ec2_security_groups: "{{ lookup('env', 'ec2_etcd_security_groups') | default(deployment_vars[deployment_type].security_groups, true) }}" - when: host_type == "etcd" and sub_host_type == "default" - -- set_fact: - ec2_instance_type: "{{ lookup('env', 'ec2_infra_instance_type') | default(deployment_vars[deployment_type].type, true) }}" - ec2_security_groups: "{{ lookup('env', 'ec2_infra_security_groups') | default(deployment_vars[deployment_type].security_groups, true) }}" - when: host_type == "node" and sub_host_type == "infra" - -- set_fact: - ec2_instance_type: "{{ lookup('env', 'ec2_node_instance_type') | default(deployment_vars[deployment_type].type, true) }}" - ec2_security_groups: "{{ lookup('env', 'ec2_node_security_groups') | default(deployment_vars[deployment_type].security_groups, true) }}" - when: host_type == "node" and sub_host_type == "compute" - -- set_fact: - ec2_instance_type: "{{ deployment_vars[deployment_type].type }}" - when: ec2_instance_type is not defined -- set_fact: - ec2_security_groups: "{{ deployment_vars[deployment_type].security_groups }}" - when: ec2_security_groups is not defined - -- name: Find amis for deployment_type - ec2_ami_find: - region: "{{ deployment_vars[deployment_type].region }}" - ami_id: "{{ deployment_vars[deployment_type].image }}" - name: "{{ deployment_vars[deployment_type].image_name }}" - register: ami_result - -- fail: msg="Could not find requested ami" - when: not ami_result.results - -- set_fact: - latest_ami: "{{ ami_result.results | oo_ami_selector(deployment_vars[deployment_type].image_name) }}" - volume_defs: - etcd: - root: - volume_size: "{{ lookup('env', 'os_etcd_root_vol_size') | default(25, true) }}" - device_type: "{{ lookup('env', 'os_etcd_root_vol_type') | default('gp2', true) }}" - iops: "{{ lookup('env', 'os_etcd_root_vol_iops') | default(500, true) }}" - master: - root: - volume_size: "{{ lookup('env', 'os_master_root_vol_size') | default(25, true) }}" - device_type: "{{ lookup('env', 'os_master_root_vol_type') | default('gp2', true) }}" - iops: "{{ lookup('env', 'os_master_root_vol_iops') | default(500, true) }}" - docker: - volume_size: "{{ lookup('env', 'os_docker_vol_size') | default(10, true) }}" - device_type: "{{ lookup('env', 'os_docker_vol_type') | default('gp2', true) }}" - iops: "{{ lookup('env', 'os_docker_vol_iops') | default(500, true) }}" - node: - root: - volume_size: "{{ lookup('env', 'os_node_root_vol_size') | default(85, true) }}" - device_type: "{{ lookup('env', 'os_node_root_vol_type') | default('gp2', true) }}" - iops: "{{ lookup('env', 'os_node_root_vol_iops') | default(500, true) }}" - docker: - volume_size: "{{ lookup('env', 'os_docker_vol_size') | default(32, true) }}" - device_type: "{{ lookup('env', 'os_docker_vol_type') | default('gp2', true) }}" - iops: "{{ lookup('env', 'os_docker_vol_iops') | default(500, true) }}" - -- set_fact: - volumes: "{{ volume_defs | oo_ec2_volume_definition(host_type, docker_vol_ephemeral | bool) }}" - -- name: Launch instance(s) - ec2: - state: present - region: "{{ deployment_vars[deployment_type].region }}" - keypair: "{{ deployment_vars[deployment_type].keypair }}" - group: "{{ deployment_vars[deployment_type].security_groups }}" - instance_type: "{{ ec2_instance_type }}" - image: "{{ deployment_vars[deployment_type].image }}" - count: "{{ instances | length }}" - vpc_subnet_id: "{{ deployment_vars[deployment_type].vpc_subnet }}" - assign_public_ip: "{{ deployment_vars[deployment_type].assign_public_ip }}" - user_data: "{{ lookup('template', '../templates/user_data.j2') }}" - wait: yes - instance_tags: - created-by: "{{ created_by }}" - clusterid: "{{ cluster }}" - environment: "{{ cluster_env }}" - host-type: "{{ host_type }}" - sub-host-type: "{{ sub_host_type }}" - volumes: "{{ volumes }}" - register: ec2 - -- name: Add Name tag to instances - ec2_tag: resource={{ item.1.id }} region={{ deployment_vars[deployment_type].region }} state=present - with_together: - - "{{ instances }}" - - "{{ ec2.instances }}" - args: - tags: - Name: "{{ item.0 }}" - -- set_fact: - instance_groups: > - tag_created-by_{{ created_by }}, tag_clusterid_{{ cluster }}, - tag_environment_{{ cluster_env }}, tag_host-type_{{ host_type }}, - tag_sub-host-type_{{ sub_host_type }} - -- set_fact: - node_label: - region: "{{ deployment_vars[deployment_type].region }}" - type: "{{sub_host_type}}" - when: host_type == "node" - -- set_fact: - node_label: - region: "{{ deployment_vars[deployment_type].region }}" - type: "{{host_type}}" - when: host_type != "node" - -- set_fact: - logrotate: - - name: syslog - path: | - /var/log/cron - /var/log/maillog - /var/log/messages - /var/log/secure - /var/log/spooler" - options: - - daily - - rotate 7 - - compress - - sharedscripts - - missingok - scripts: - postrotate: "/bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true" - -- name: Add new instances groups and variables - add_host: - hostname: "{{ item.0 }}" - ansible_ssh_host: "{{ item.1.dns_name }}" - ansible_ssh_user: "{{ deployment_vars[deployment_type].ssh_user }}" - ansible_become: "{{ deployment_vars[deployment_type].become }}" - groups: "{{ instance_groups }}" - ec2_private_ip_address: "{{ item.1.private_ip }}" - ec2_ip_address: "{{ item.1.public_ip }}" - ec2_tag_sub-host-type: "{{ sub_host_type }}" - openshift_node_labels: "{{ node_label }}" - logrotate_scripts: "{{ logrotate }}" - with_together: - - "{{ instances }}" - - "{{ ec2.instances }}" - -- name: Add new instances to nodes_to_add group if needed - add_host: - hostname: "{{ item.0 }}" - ansible_ssh_host: "{{ item.1.dns_name }}" - ansible_ssh_user: "{{ deployment_vars[deployment_type].ssh_user }}" - ansible_become: "{{ deployment_vars[deployment_type].become }}" - groups: nodes_to_add - ec2_private_ip_address: "{{ item.1.private_ip }}" - ec2_ip_address: "{{ item.1.public_ip }}" - openshift_node_labels: "{{ node_label }}" - logrotate_scripts: "{{ logrotate }}" - with_together: - - "{{ instances }}" - - "{{ ec2.instances }}" - when: oo_extend_env is defined and oo_extend_env | bool - -- name: Wait for ssh - wait_for: "port=22 host={{ item.dns_name }}" - with_items: "{{ ec2.instances }}" - -- name: Wait for user setup - command: "ssh -o StrictHostKeyChecking=no -o PasswordAuthentication=no -o ConnectTimeout=10 -o UserKnownHostsFile=/dev/null {{ hostvars[item.0].ansible_ssh_user }}@{{ item.1.dns_name }} echo {{ hostvars[item.0].ansible_ssh_user }} user is setup" - register: result - until: result.rc == 0 - retries: 20 - delay: 10 - with_together: - - "{{ instances }}" - - "{{ ec2.instances }}" diff --git a/playbooks/aws/openshift-cluster/templates/user_data.j2 b/playbooks/aws/openshift-cluster/templates/user_data.j2 deleted file mode 100644 index b1087f9c4..000000000 --- a/playbooks/aws/openshift-cluster/templates/user_data.j2 +++ /dev/null @@ -1,22 +0,0 @@ -#cloud-config -{% if type in ['node', 'master'] and 'docker' in volume_defs[type] %} -mounts: -- [ xvdb ] -- [ ephemeral0 ] -{% endif %} - -write_files: -{% if type in ['node', 'master'] and 'docker' in volume_defs[type] %} -- content: | - DEVS=/dev/xvdb - VG=docker_vg - path: /etc/sysconfig/docker-storage-setup - owner: root:root - permissions: '0644' -{% endif %} -{% if deployment_vars[deployment_type].become | bool %} -- path: /etc/sudoers.d/99-{{ deployment_vars[deployment_type].ssh_user }}-cloud-init-requiretty - permissions: 440 - content: | - Defaults:{{ deployment_vars[deployment_type].ssh_user }} !requiretty -{% endif %} diff --git a/playbooks/aws/openshift-cluster/terminate.yml b/playbooks/aws/openshift-cluster/terminate.yml deleted file mode 100644 index 1f15aa4bf..000000000 --- a/playbooks/aws/openshift-cluster/terminate.yml +++ /dev/null @@ -1,77 +0,0 @@ ---- -- name: Terminate instance(s) - hosts: localhost - connection: local - become: no - gather_facts: no - vars_files: - - vars.yml - tasks: - - add_host: - name: "{{ item }}" - groups: oo_hosts_to_terminate - ansible_ssh_user: "{{ deployment_vars[deployment_type].ssh_user }}" - ansible_become: "{{ deployment_vars[deployment_type].become }}" - with_items: "{{ (groups['tag_clusterid_' ~ cluster_id] | default([])) | difference(['localhost']) }}" - -- name: Unsubscribe VMs - hosts: oo_hosts_to_terminate - roles: - - role: rhel_unsubscribe - when: deployment_type in ['atomic-enterprise', 'enterprise', 'openshift-enterprise'] and - ansible_distribution == "RedHat" and - lookup('oo_option', 'rhel_skip_subscription') | default(rhsub_skip, True) | - default('no', True) | lower in ['no', 'false'] - -- name: Terminate instances - hosts: localhost - connection: local - become: no - gather_facts: no - tasks: - - name: Remove tags from instances - ec2_tag: - resource: "{{ hostvars[item]['ec2_id'] }}" - region: "{{ hostvars[item]['ec2_region'] }}" - state: absent - tags: - environment: "{{ hostvars[item]['ec2_tag_environment'] }}" - clusterid: "{{ hostvars[item]['ec2_tag_clusterid'] }}" - host-type: "{{ hostvars[item]['ec2_tag_host-type'] }}" - sub_host_type: "{{ hostvars[item]['ec2_tag_sub-host-type'] }}" - with_items: "{{ groups.oo_hosts_to_terminate }}" - when: "'oo_hosts_to_terminate' in groups" - - - name: Terminate instances - ec2: - state: absent - instance_ids: ["{{ hostvars[item].ec2_id }}"] - region: "{{ hostvars[item].ec2_region }}" - ignore_errors: yes - register: ec2_term - with_items: "{{ groups.oo_hosts_to_terminate }}" - when: "'oo_hosts_to_terminate' in groups" - - # Fail if any of the instances failed to terminate with an error other - # than 403 Forbidden - - fail: - msg: "Terminating instance {{ item.ec2_id }} failed with message {{ item.msg }}" - when: "'oo_hosts_to_terminate' in groups and item.has_key('failed') and item.failed" - with_items: "{{ ec2_term.results }}" - - - name: Stop instance if termination failed - ec2: - state: stopped - instance_ids: ["{{ item.item.ec2_id }}"] - region: "{{ item.item.ec2_region }}" - register: ec2_stop - when: "'oo_hosts_to_terminate' in groups and item.has_key('failed') and item.failed" - with_items: "{{ ec2_term.results }}" - - - name: Rename stopped instances - ec2_tag: resource={{ item.item.item.ec2_id }} region={{ item.item.item.ec2_region }} state=present - args: - tags: - Name: "{{ item.item.item.ec2_tag_Name }}-terminate" - with_items: "{{ ec2_stop.results }}" - when: ec2_stop | changed diff --git a/playbooks/aws/openshift-cluster/update.yml b/playbooks/aws/openshift-cluster/update.yml deleted file mode 100644 index ed05d61ed..000000000 --- a/playbooks/aws/openshift-cluster/update.yml +++ /dev/null @@ -1,34 +0,0 @@ ---- -- hosts: localhost - gather_facts: no - tasks: - - include_vars: vars.yml - - include_vars: cluster_hosts.yml - - add_host: - name: "{{ item }}" - groups: l_oo_all_hosts - with_items: "{{ g_all_hosts }}" - -- hosts: l_oo_all_hosts - gather_facts: no - tasks: - - include_vars: vars.yml - - include_vars: cluster_hosts.yml - -- name: Update - Populate oo_hosts_to_update group - hosts: localhost - connection: local - become: no - gather_facts: no - tasks: - - name: Update - Evaluate oo_hosts_to_update - add_host: - name: "{{ item }}" - groups: oo_hosts_to_update - ansible_ssh_user: "{{ deployment_vars[deployment_type].ssh_user }}" - ansible_become: "{{ deployment_vars[deployment_type].become }}" - with_items: "{{ g_all_hosts | default([]) }}" - -- include: ../../common/openshift-cluster/update_repos_and_packages.yml - -- include: config.yml diff --git a/playbooks/aws/openshift-cluster/vars.yml b/playbooks/aws/openshift-cluster/vars.yml deleted file mode 100644 index d774187f0..000000000 --- a/playbooks/aws/openshift-cluster/vars.yml +++ /dev/null @@ -1,33 +0,0 @@ ---- -debug_level: 2 - -deployment_rhel7_ent_base: - # rhel-7.1, requires cloud access subscription - image: "{{ lookup('oo_option', 'ec2_image') | default('ami-10251c7a', True) }}" - image_name: "{{ lookup('oo_option', 'ec2_image_name') | default(None, True) }}" - region: "{{ lookup('oo_option', 'ec2_region') | default('us-east-1', True) }}" - ssh_user: ec2-user - become: yes - keypair: "{{ lookup('oo_option', 'ec2_keypair') | default('libra', True) }}" - type: "{{ lookup('oo_option', 'ec2_instance_type') | default('m4.large', True) }}" - security_groups: "{{ lookup('oo_option', 'ec2_security_groups') | default([ 'public' ], True) }}" - vpc_subnet: "{{ lookup('oo_option', 'ec2_vpc_subnet') | default(omit, True) }}" - assign_public_ip: "{{ lookup('oo_option', 'ec2_assign_public_ip') | default(omit, True) }}" - -deployment_vars: - origin: - # centos-7, requires marketplace - image: "{{ lookup('oo_option', 'ec2_image') | default('ami-6d1c2007', True) }}" - image_name: "{{ lookup('oo_option', 'ec2_image_name') | default(None, True) }}" - region: "{{ lookup('oo_option', 'ec2_region') | default('us-east-1', True) }}" - ssh_user: centos - become: yes - keypair: "{{ lookup('oo_option', 'ec2_keypair') | default('libra', True) }}" - type: "{{ lookup('oo_option', 'ec2_instance_type') | default('m4.large', True) }}" - security_groups: "{{ lookup('oo_option', 'ec2_security_groups') | default([ 'public' ], True) }}" - vpc_subnet: "{{ lookup('oo_option', 'ec2_vpc_subnet') | default(omit, True) }}" - assign_public_ip: "{{ lookup('oo_option', 'ec2_assign_public_ip') | default(omit, True) }}" - - enterprise: "{{ deployment_rhel7_ent_base }}" - openshift-enterprise: "{{ deployment_rhel7_ent_base }}" - atomic-enterprise: "{{ deployment_rhel7_ent_base }}" |