diff options
Diffstat (limited to 'inventory')
| -rw-r--r-- | inventory/byo/hosts.byo.glusterfs.external.example | 56 | ||||
| -rw-r--r-- | inventory/byo/hosts.byo.glusterfs.mixed.example | 59 | ||||
| -rw-r--r-- | inventory/byo/hosts.byo.glusterfs.native.example (renamed from inventory/byo/hosts.byo.native-glusterfs.example) | 0 | ||||
| -rw-r--r-- | inventory/byo/hosts.origin.example | 20 | ||||
| -rw-r--r-- | inventory/byo/hosts.ose.example | 20 |
5 files changed, 153 insertions, 2 deletions
diff --git a/inventory/byo/hosts.byo.glusterfs.external.example b/inventory/byo/hosts.byo.glusterfs.external.example new file mode 100644 index 000000000..140033a39 --- /dev/null +++ b/inventory/byo/hosts.byo.glusterfs.external.example @@ -0,0 +1,56 @@ +# This is an example of a bring your own (byo) host inventory for a cluster +# with natively hosted, containerized GlusterFS storage. +# +# This inventory may be used with the byo/config.yml playbook to deploy a new +# cluster with GlusterFS storage, which will use that storage to create a +# volume that will provide backend storage for a hosted Docker registry. +# +# This inventory may also be used with byo/openshift-glusterfs/config.yml to +# deploy GlusterFS storage on an existing cluster. With this playbook, the +# registry backend volume will be created but the administrator must then +# either deploy a hosted registry or change an existing hosted registry to use +# that volume. +# +# There are additional configuration parameters that can be specified to +# control the deployment and state of a GlusterFS cluster. Please see the +# documentation in playbooks/byo/openshift-glusterfs/README.md and +# roles/openshift_storage_glusterfs/README.md for additional details. + +[OSEv3:children] +masters +nodes +# Specify there will be GlusterFS nodes +glusterfs + +[OSEv3:vars] +ansible_ssh_user=root +openshift_deployment_type=origin +# Specify that we want to use an external GlusterFS cluster +openshift_storage_glusterfs_is_native=False +# Specify the IP address or hostname of the external heketi service +openshift_storage_glusterfs_heketi_url=172.0.0.1 + +[masters] +master node=True storage=True master=True + +[nodes] +master node=True storage=True master=True openshift_schedulable=False +node0 node=True openshift_schedulable=True +node1 node=True openshift_schedulable=True +node2 node=True openshift_schedulable=True + +# Specify the glusterfs group, which contains the nodes of the external +# GlusterFS cluster. At a minimum, each node must have "glusterfs_hostname" +# and "glusterfs_devices" variables defined. +# +# The first variable indicates the hostname of the external GLusterFS node, +# and must be reachable by the external heketi service. +# +# The second variable is a list of block devices the node will have access to +# that are intended solely for use as GlusterFS storage. These block devices +# must be bare (e.g. have no data, not be marked as LVM PVs), and will be +# formatted. +[glusterfs] +node0 glusterfs_devices='[ "/dev/vdb" ]' +node1 glusterfs_devices='[ "/dev/vdb", "/dev/vdc" ]' +node2 glusterfs_devices='[ "/dev/vdd" ]' diff --git a/inventory/byo/hosts.byo.glusterfs.mixed.example b/inventory/byo/hosts.byo.glusterfs.mixed.example new file mode 100644 index 000000000..96e997dc7 --- /dev/null +++ b/inventory/byo/hosts.byo.glusterfs.mixed.example @@ -0,0 +1,59 @@ +# This is an example of a bring your own (byo) host inventory for a cluster +# with natively hosted, containerized GlusterFS storage. +# +# This inventory may be used with the byo/config.yml playbook to deploy a new +# cluster with GlusterFS storage, which will use that storage to create a +# volume that will provide backend storage for a hosted Docker registry. +# +# This inventory may also be used with byo/openshift-glusterfs/config.yml to +# deploy GlusterFS storage on an existing cluster. With this playbook, the +# registry backend volume will be created but the administrator must then +# either deploy a hosted registry or change an existing hosted registry to use +# that volume. +# +# There are additional configuration parameters that can be specified to +# control the deployment and state of a GlusterFS cluster. Please see the +# documentation in playbooks/byo/openshift-glusterfs/README.md and +# roles/openshift_storage_glusterfs/README.md for additional details. + +[OSEv3:children] +masters +nodes +# Specify there will be GlusterFS nodes +glusterfs + +[OSEv3:vars] +ansible_ssh_user=root +openshift_deployment_type=origin +# Specify that we want to use an external GlusterFS cluster and a native +# heketi service +openshift_storage_glusterfs_is_native=False +openshift_storage_glusterfs_heketi_is_native=False +# Specify that heketi will use SSH to communicate to the GlusterFS nodes and +# the private key file it will use for authentication +openshift_storage_glusterfs_heketi_executor=ssh +openshift_storage_glusterfs_heketi_ssh_keyfile=/root/id_rsa +[masters] +master node=True storage=True master=True + +[nodes] +master node=True storage=True master=True openshift_schedulable=False +node0 node=True openshift_schedulable=True +node1 node=True openshift_schedulable=True +node2 node=True openshift_schedulable=True + +# Specify the glusterfs group, which contains the nodes of the external +# GlusterFS cluster. At a minimum, each node must have "glusterfs_hostname" +# and "glusterfs_devices" variables defined. +# +# The first variable indicates the hostname of the external GLusterFS node, +# and must be reachable by the external heketi service. +# +# The second variable is a list of block devices the node will have access to +# that are intended solely for use as GlusterFS storage. These block devices +# must be bare (e.g. have no data, not be marked as LVM PVs), and will be +# formatted. +[glusterfs] +node0 glusterfs_devices='[ "/dev/vdb" ]' +node1 glusterfs_devices='[ "/dev/vdb", "/dev/vdc" ]' +node2 glusterfs_devices='[ "/dev/vdd" ]' diff --git a/inventory/byo/hosts.byo.native-glusterfs.example b/inventory/byo/hosts.byo.glusterfs.native.example index dc847a5b2..dc847a5b2 100644 --- a/inventory/byo/hosts.byo.native-glusterfs.example +++ b/inventory/byo/hosts.byo.glusterfs.native.example diff --git a/inventory/byo/hosts.origin.example b/inventory/byo/hosts.origin.example index 962a01a91..e6bc6c829 100644 --- a/inventory/byo/hosts.origin.example +++ b/inventory/byo/hosts.origin.example @@ -10,6 +10,10 @@ nfs # Set variables common for all OSEv3 hosts [OSEv3:vars] +# Enable unsupported configurations, things that will yield a partially +# functioning cluster but would not be supported for production use +#openshift_enable_unsupported_configurations=false + # SSH user, this user should allow ssh based auth without requiring a # password. If using ssh key based auth, then the key should be managed by an # ssh agent. @@ -42,6 +46,17 @@ openshift_release=v3.6 # This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. #openshift_pkg_version=-3.6.0 +# This enables all the system containers except for docker: +#openshift_use_system_containers=False +# +# But you can choose separately each component that must be a +# system container: +# +#openshift_use_openvswitch_system_container=False +#openshift_use_node_system_container=False +#openshift_use_master_system_container=False +#openshift_use_etcd_system_container=False + # Install the openshift examples #openshift_install_examples=true @@ -798,7 +813,7 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # use this line. # The directory in "auditFilePath" will be created if it's not # exist -#openshift_master_audit_config={"enabled": true, "auditFilePath": "/var/log/openpaas-oscp-audit/openpaas-oscp-audit.log", "maximumFileRetentionDays": 14, "maximumFileSizeMegabytes": 500, "maximumRetainedFiles": 5}} +#openshift_master_audit_config={"enabled": true, "auditFilePath": "/var/log/openpaas-oscp-audit/openpaas-oscp-audit.log", "maximumFileRetentionDays": 14, "maximumFileSizeMegabytes": 500, "maximumRetainedFiles": 5} # Enable origin repos that point at Centos PAAS SIG, defaults to true, only used # by deployment_type=origin @@ -815,6 +830,9 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Controls validity for etcd CA, peer, server and client certificates. # #etcd_ca_default_days=1825 +# +# ServiceAccountConfig:LimitSecretRefences rejects pods that reference secrets their service accounts do not reference +# openshift_master_saconfig_limitsecretreferences=false # Upgrade Control # diff --git a/inventory/byo/hosts.ose.example b/inventory/byo/hosts.ose.example index 63f1f00d2..928da40fa 100644 --- a/inventory/byo/hosts.ose.example +++ b/inventory/byo/hosts.ose.example @@ -10,6 +10,10 @@ nfs # Set variables common for all OSEv3 hosts [OSEv3:vars] +# Enable unsupported configurations, things that will yield a partially +# functioning cluster but would not be supported for production use +#openshift_enable_unsupported_configurations=false + # SSH user, this user should allow ssh based auth without requiring a # password. If using ssh key based auth, then the key should be managed by an # ssh agent. @@ -42,6 +46,17 @@ openshift_release=v3.6 # This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. #openshift_pkg_version=-3.6.0 +# This enables all the system containers except for docker: +#openshift_use_system_containers=False +# +# But you can choose separately each component that must be a +# system container: +# +#openshift_use_openvswitch_system_container=False +#openshift_use_node_system_container=False +#openshift_use_master_system_container=False +#openshift_use_etcd_system_container=False + # Install the openshift examples #openshift_install_examples=true @@ -798,7 +813,7 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # use this line. # The directory in "auditFilePath" will be created if it's not # exist -#openshift_master_audit_config={"enabled": true, "auditFilePath": "/var/log/openpaas-oscp-audit/openpaas-oscp-audit.log", "maximumFileRetentionDays": 14, "maximumFileSizeMegabytes": 500, "maximumRetainedFiles": 5}} +#openshift_master_audit_config={"enabled": true, "auditFilePath": "/var/log/openpaas-oscp-audit/openpaas-oscp-audit.log", "maximumFileRetentionDays": 14, "maximumFileSizeMegabytes": 500, "maximumRetainedFiles": 5} # Validity of the auto-generated OpenShift certificates in days. # See also openshift_hosted_registry_cert_expire_days above. @@ -811,6 +826,9 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Controls validity for etcd CA, peer, server and client certificates. # #etcd_ca_default_days=1825 +# +# ServiceAccountConfig:LimitSecretRefences rejects pods that reference secrets their service accounts do not reference +# openshift_master_saconfig_limitsecretreferences=false # Upgrade Control # |