summaryrefslogtreecommitdiffstats
path: root/inventory
diff options
context:
space:
mode:
Diffstat (limited to 'inventory')
-rw-r--r--inventory/byo/hosts.aep.example468
-rw-r--r--inventory/byo/hosts.aep_quickstart20
-rw-r--r--inventory/byo/hosts.origin.example114
-rw-r--r--inventory/byo/hosts.ose.example112
4 files changed, 182 insertions, 532 deletions
diff --git a/inventory/byo/hosts.aep.example b/inventory/byo/hosts.aep.example
deleted file mode 100644
index e038b39d5..000000000
--- a/inventory/byo/hosts.aep.example
+++ /dev/null
@@ -1,468 +0,0 @@
-# This is an example of a bring your own (byo) host inventory
-
-# Create an OSEv3 group that contains the masters and nodes groups
-[OSEv3:children]
-masters
-nodes
-etcd
-lb
-
-# Set variables common for all OSEv3 hosts
-[OSEv3:vars]
-# SSH user, this user should allow ssh based auth without requiring a
-# password. If using ssh key based auth, then the key should be managed by an
-# ssh agent.
-ansible_ssh_user=root
-
-# If ansible_ssh_user is not root, ansible_become must be set to true and the
-# user must be configured for passwordless sudo
-#ansible_become=yes
-
-# Debug level for all Atomic Enterprise components (Defaults to 2)
-debug_level=2
-
-# deployment type valid values are origin, online, atomic-enterprise, and openshift-enterprise
-deployment_type=atomic-enterprise
-
-# Specify the generic release of OpenShift to install. This is used mainly just during installation, after which we
-# rely on the version running on the first master. Works best for containerized installs where we can usually
-# use this to lookup the latest exact version of the container images, which is the tag actually used to configure
-# the cluster. For RPM installations we just verify the version detected in your configured repos matches this
-# release.
-openshift_release=v3.2
-
-# Specify an exact container image tag to install or configure.
-# WARNING: This value will be used for all hosts in containerized environments, even those that have another version installed.
-# This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up.
-#openshift_image_tag=v3.2.0.46
-
-# Specify an exact rpm version to install or configure.
-# WARNING: This value will be used for all hosts in RPM based environments, even those that have another version installed.
-# This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up.
-#openshift_pkg_version=-3.2.0.46
-
-# Install the openshift examples
-#openshift_install_examples=true
-
-# Enable cluster metrics
-#use_cluster_metrics=true
-
-# Configure logoutURL in the master config for console customization
-# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#changing-the-logout-url
-#openshift_master_logout_url=http://example.com
-
-# Configure extensionScripts in the master config for console customization
-# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#loading-custom-scripts-and-stylesheets
-#openshift_master_extension_scripts=['/path/to/script1.js','/path/to/script2.js']
-
-# Configure extensionStylesheets in the master config for console customization
-# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#loading-custom-scripts-and-stylesheets
-#openshift_master_extension_stylesheets=['/path/to/stylesheet1.css','/path/to/stylesheet2.css']
-
-# Configure extensions in the master config for console customization
-# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#serving-static-files
-#openshift_master_extensions=[{'name': 'images', 'sourceDirectory': '/path/to/my_images'}]
-
-# Configure extensions in the master config for console customization
-# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#serving-static-files
-#openshift_master_oauth_template=/path/to/login-template.html
-
-# Configure metricsPublicURL in the master config for cluster metrics
-# See: https://docs.openshift.com/enterprise/latest/install_config/cluster_metrics.html
-#openshift_master_metrics_public_url=https://hawkular-metrics.example.com/hawkular/metrics
-
-# Configure loggingPublicURL in the master config for aggregate logging
-# See: https://docs.openshift.com/enterprise/latest/install_config/aggregate_logging.html
-#openshift_master_logging_public_url=https://kibana.example.com
-
-# Configure imagePolicyConfig in the master config
-# See: https://godoc.org/github.com/openshift/origin/pkg/cmd/server/api#ImagePolicyConfig
-#openshift_master_image_policy_config={"maxImagesBulkImportedPerRepository": 3, "disableScheduledImport": true}
-
-# Docker Configuration
-# Add additional, insecure, and blocked registries to global docker configuration
-# For enterprise deployment types we ensure that registry.access.redhat.com is
-# included if you do not include it
-#openshift_docker_additional_registries=registry.example.com
-#openshift_docker_insecure_registries=registry.example.com
-#openshift_docker_blocked_registries=registry.hacker.com
-# Disable pushing to dockerhub
-#openshift_docker_disable_push_dockerhub=True
-# Items added, as is, to end of /etc/sysconfig/docker OPTIONS
-# Default value: "--log-driver=json-file --log-opt max-size=50m"
-#openshift_docker_options="-l warn --ipv6=false"
-
-# Specify exact version of Docker to configure or upgrade to.
-# Downgrades are not supported and will error out. Be careful when upgrading docker from < 1.10 to > 1.10.
-# docker_version="1.10.3"
-
-# Skip upgrading Docker during an OpenShift upgrade, leaves the current Docker version alone.
-# docker_upgrade=False
-
-# Alternate image format string. If you're not modifying the format string and
-# only need to inject your own registry you may want to consider
-# openshift_docker_additional_registries instead
-#oreg_url=example.com/aep3/aep-${component}:${version}
-# If oreg_url points to a registry other than registry.access.redhat.com we can
-# modify image streams to point at that registry by setting the following to true
-#openshift_examples_modify_imagestreams=True
-
-# Additional yum repos to install
-#openshift_additional_repos=[{'id': 'aep-devel', 'name': 'aep-devel', 'baseurl': 'http://example.com/puddle/build/AtomicOpenShift/3.1/latest/RH7-RHOSE-3.0/$basearch/os', 'enabled': 1, 'gpgcheck': 0}]
-
-# htpasswd auth
-openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider', 'filename': '/etc/origin/master/htpasswd'}]
-# Defining htpasswd users
-#openshift_master_htpasswd_users={'user1': '<pre-hashed password>', 'user2': '<pre-hashed password>'
-# or
-#openshift_master_htpasswd_file=<path to local pre-generated htpasswd file>
-
-# Allow all auth
-#openshift_master_identity_providers=[{'name': 'allow_all', 'login': 'true', 'challenge': 'true', 'kind': 'AllowAllPasswordIdentityProvider'}]
-
-# LDAP auth
-#openshift_master_identity_providers=[{'name': 'my_ldap_provider', 'challenge': 'true', 'login': 'true', 'kind': 'LDAPPasswordIdentityProvider', 'attributes': {'id': ['dn'], 'email': ['mail'], 'name': ['cn'], 'preferredUsername': ['uid']}, 'bindDN': '', 'bindPassword': '', 'ca': '', 'insecure': 'false', 'url': 'ldap://ldap.example.com:389/ou=users,dc=example,dc=com?uid'}]
-# Configuring the ldap ca certificate
-#openshift_master_ldap_ca=<ca text>
-# or
-#openshift_master_ldap_ca_file=<path to local ca file to use>
-
-# Available variables for configuring certificates for other identity providers:
-#openshift_master_openid_ca
-#openshift_master_openid_ca_file
-#openshift_master_request_header_ca
-#openshift_master_request_header_ca_file
-
-# Cloud Provider Configuration
-#
-# Note: You may make use of environment variables rather than store
-# sensitive configuration within the ansible inventory.
-# For example:
-#openshift_cloudprovider_aws_access_key="{{ lookup('env','AWS_ACCESS_KEY_ID') }}"
-#openshift_cloudprovider_aws_secret_key="{{ lookup('env','AWS_SECRET_ACCESS_KEY') }}"
-#
-# AWS
-#openshift_cloudprovider_kind=aws
-# Note: IAM profiles may be used instead of storing API credentials on disk.
-#openshift_cloudprovider_aws_access_key=aws_access_key_id
-#openshift_cloudprovider_aws_secret_key=aws_secret_access_key
-#
-# Openstack
-#openshift_cloudprovider_kind=openstack
-#openshift_cloudprovider_openstack_auth_url=http://openstack.example.com:35357/v2.0/
-#openshift_cloudprovider_openstack_username=username
-#openshift_cloudprovider_openstack_password=password
-#openshift_cloudprovider_openstack_tenant_id=tenant_id
-#openshift_cloudprovider_openstack_tenant_name=tenant_name
-#openshift_cloudprovider_openstack_region=region
-#openshift_cloudprovider_openstack_lb_subnet_id=subnet_id
-
-# Project Configuration
-#osm_project_request_message=''
-#osm_project_request_template=''
-#osm_mcs_allocator_range='s0:/2'
-#osm_mcs_labels_per_project=5
-#osm_uid_allocator_range='1000000000-1999999999/10000'
-
-# Configure additional projects
-#openshift_additional_projects={'my-project': {'default_node_selector': 'label=value'}}
-
-# Enable cockpit
-#osm_use_cockpit=true
-#
-# Set cockpit plugins
-#osm_cockpit_plugins=['cockpit-kubernetes']
-
-# Native high availability cluster method with optional load balancer.
-# If no lb group is defined, the installer assumes that a load balancer has
-# been preconfigured. For installation the value of
-# openshift_master_cluster_hostname must resolve to the load balancer
-# or to one or all of the masters defined in the inventory if no load
-# balancer is present.
-#openshift_master_cluster_method=native
-#openshift_master_cluster_hostname=openshift-ansible.test.example.com
-#openshift_master_cluster_public_hostname=openshift-ansible.test.example.com
-
-# Pacemaker high availability cluster method.
-# Pacemaker HA environment must be able to self provision the
-# configured VIP. For installation openshift_master_cluster_hostname
-# must resolve to the configured VIP.
-#openshift_master_cluster_method=pacemaker
-#openshift_master_cluster_password=openshift_cluster
-#openshift_master_cluster_vip=192.168.133.25
-#openshift_master_cluster_public_vip=192.168.133.25
-#openshift_master_cluster_hostname=openshift-ansible.test.example.com
-#openshift_master_cluster_public_hostname=openshift-ansible.test.example.com
-
-# Override the default controller lease ttl
-#osm_controller_lease_ttl=30
-
-# Configure controller arguments
-#osm_controller_args={'resource-quota-sync-period': ['10s']}
-
-# Configure api server arguments
-#osm_api_server_args={'max-requests-inflight': ['400']}
-
-# default subdomain to use for exposed routes
-#openshift_master_default_subdomain=apps.test.example.com
-
-# additional cors origins
-#osm_custom_cors_origins=['foo.example.com', 'bar.example.com']
-
-# default project node selector
-#osm_default_node_selector='region=primary'
-
-# Override the default pod eviction timeout
-#openshift_master_pod_eviction_timeout=5m
-
-# Override the default oauth tokenConfig settings:
-# openshift_master_access_token_max_seconds=86400
-# openshift_master_auth_token_max_seconds=500
-
-# Override master servingInfo.maxRequestsInFlight
-#openshift_master_max_requests_inflight=500
-
-# default storage plugin dependencies to install, by default the ceph and
-# glusterfs plugin dependencies will be installed, if available.
-#osn_storage_plugin_deps=['ceph','glusterfs','iscsi']
-
-# OpenShift Router Options
-#
-# An OpenShift router will be created during install if there are
-# nodes present with labels matching the default router selector,
-# "region=infra". Set openshift_node_labels per node as needed in
-# order to label nodes.
-#
-# Example:
-# [nodes]
-# node.example.com openshift_node_labels="{'region': 'infra'}"
-#
-# Router selector (optional)
-# Router will only be created if nodes matching this label are present.
-# Default value: 'region=infra'
-#openshift_hosted_router_selector='region=infra'
-#
-# Router replicas (optional)
-# Unless specified, openshift-ansible will calculate the replica count
-# based on the number of nodes matching the openshift router selector.
-#openshift_hosted_router_replicas=2
-#
-# Router force subdomain (optional)
-# A router path format to force on all routes used by this router
-# (will ignore the route host value)
-#openshift_hosted_router_force_subdomain='${name}-${namespace}.apps.example.com'
-#
-# Router certificate (optional)
-# Provide local certificate paths which will be configured as the
-# router's default certificate.
-#openshift_hosted_router_certificate={"certfile": "/path/to/router.crt", "keyfile": "/path/to/router.key", "cafile": "/path/to/router-ca.crt"}
-
-# Openshift Registry Options
-#
-# An OpenShift registry will be created during install if there are
-# nodes present with labels matching the default registry selector,
-# "region=infra". Set openshift_node_labels per node as needed in
-# order to label nodes.
-#
-# Example:
-# [nodes]
-# node.example.com openshift_node_labels="{'region': 'infra'}"
-#
-# Registry selector (optional)
-# Registry will only be created if nodes matching this label are present.
-# Default value: 'region=infra'
-#openshift_hosted_registry_selector='region=infra'
-#
-# Registry replicas (optional)
-# Unless specified, openshift-ansible will calculate the replica count
-# based on the number of nodes matching the openshift registry selector.
-#openshift_hosted_registry_replicas=2
-
-# Registry Storage Options
-#
-# NFS Host Group
-# An NFS volume will be created with path "nfs_directory/volume_name"
-# on the host within the [nfs] host group. For example, the volume
-# path using these options would be "/exports/registry"
-#openshift_hosted_registry_storage_kind=nfs
-#openshift_hosted_registry_storage_access_modes=['ReadWriteMany']
-#openshift_hosted_registry_storage_nfs_directory=/exports
-#openshift_hosted_registry_storage_nfs_options='*(rw,root_squash)'
-#openshift_hosted_registry_storage_volume_name=registry
-#openshift_hosted_registry_storage_volume_size=10Gi
-#
-# External NFS Host
-# NFS volume must already exist with path "nfs_directory/_volume_name" on
-# the storage_host. For example, the remote volume path using these
-# options would be "nfs.example.com:/exports/registry"
-#openshift_hosted_registry_storage_kind=nfs
-#openshift_hosted_registry_storage_access_modes=['ReadWriteMany']
-#openshift_hosted_registry_storage_host=nfs.example.com
-#openshift_hosted_registry_storage_nfs_directory=/exports
-#openshift_hosted_registry_storage_volume_name=registry
-#openshift_hosted_registry_storage_volume_size=10Gi
-#
-# Openstack
-# Volume must already exist.
-#openshift_hosted_registry_storage_kind=openstack
-#openshift_hosted_registry_storage_access_modes=['ReadWriteOnce']
-#openshift_hosted_registry_storage_openstack_filesystem=ext4
-#openshift_hosted_registry_storage_openstack_volumeID=3a650b4f-c8c5-4e0a-8ca5-eaee11f16c57
-#openshift_hosted_registry_storage_volume_size=10Gi
-#
-# AWS S3
-# S3 bucket must already exist.
-#openshift_hosted_registry_storage_kind=object
-#openshift_hosted_registry_storage_provider=s3
-#openshift_hosted_registry_storage_s3_accesskey=aws_access_key_id
-#openshift_hosted_registry_storage_s3_secretkey=aws_secret_access_key
-#openshift_hosted_registry_storage_s3_bucket=bucket_name
-#openshift_hosted_registry_storage_s3_region=bucket_region
-#openshift_hosted_registry_storage_s3_chunksize=26214400
-
-# Configure the multi-tenant SDN plugin (default is 'redhat/openshift-ovs-subnet')
-# os_sdn_network_plugin_name='redhat/openshift-ovs-multitenant'
-
-# Disable the OpenShift SDN plugin
-# openshift_use_openshift_sdn=False
-
-# Configure SDN cluster network CIDR block. This network block should
-# be a private block and should not conflict with existing network
-# blocks in your infrastructure that pods may require access to.
-# Can not be changed after deployment.
-#osm_cluster_network_cidr=10.1.0.0/16
-
-# Configure number of bits to allocate to each host’s subnet e.g. 8
-# would mean a /24 network on the host.
-#osm_host_subnet_length=8
-
-# Configure master API and console ports.
-#openshift_master_api_port=8443
-#openshift_master_console_port=8443
-
-# set RPM version for debugging purposes
-#openshift_pkg_version=-3.1.0.0
-
-# Configure custom named certificates
-# NOTE: openshift_master_named_certificates is cached on masters and is an
-# additive fact, meaning that each run with a different set of certificates
-# will add the newly provided certificates to the cached set of certificates.
-# If you would like openshift_master_named_certificates to be overwritten with
-# the provided value, specify openshift_master_overwrite_named_certificates.
-#openshift_master_overwrite_named_certificates=true
-#
-# Provide local certificate paths which will be deployed to masters
-#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key"}]
-#
-# Detected names may be overridden by specifying the "names" key
-#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "names": ["public-master-host.com"]}]
-
-# Session options
-#openshift_master_session_name=ssn
-#openshift_master_session_max_seconds=3600
-
-# An authentication and encryption secret will be generated if secrets
-# are not provided. If provided, openshift_master_session_auth_secrets
-# and openshift_master_encryption_secrets must be equal length.
-#
-# Signing secrets, used to authenticate sessions using
-# HMAC. Recommended to use secrets with 32 or 64 bytes.
-#openshift_master_session_auth_secrets=['DONT+USE+THIS+SECRET+b4NV+pmZNSO']
-#
-# Encrypting secrets, used to encrypt sessions. Must be 16, 24, or 32
-# characters long, to select AES-128, AES-192, or AES-256.
-#openshift_master_session_encryption_secrets=['DONT+USE+THIS+SECRET+b4NV+pmZNSO']
-
-# configure how often node iptables rules are refreshed
-#openshift_node_iptables_sync_period=5s
-
-# Configure nodeIP in the node config
-# This is needed in cases where node traffic is desired to go over an
-# interface other than the default network interface.
-#openshift_node_set_node_ip=True
-
-# Force setting of system hostname when configuring OpenShift
-# This works around issues related to installations that do not have valid dns
-# entries for the interfaces attached to the host.
-#openshift_set_hostname=True
-
-# Configure dnsIP in the node config
-#openshift_dns_ip=172.30.0.1
-
-# Configure node kubelet arguments
-#openshift_node_kubelet_args={'max-pods': ['110'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']}
-
-# Configure logrotate scripts
-# See: https://github.com/nickhammond/ansible-logrotate
-#logrotate_scripts=[{"name": "syslog", "path": "/var/log/cron\n/var/log/maillog\n/var/log/messages\n/var/log/secure\n/var/log/spooler\n", "options": ["daily", "rotate 7", "compress", "sharedscripts", "missingok"], "scripts": {"postrotate": "/bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true"}}]
-
-# openshift-ansible will wait indefinitely for your input when it detects that the
-# value of openshift_hostname resolves to an IP address not bound to any local
-# interfaces. This mis-configuration is problematic for any pod leveraging host
-# networking and liveness or readiness probes.
-# Setting this variable to true will override that check.
-#openshift_override_hostname_check=true
-
-# Configure dnsmasq for cluster dns, switch the host's local resolver to use dnsmasq
-# and configure node's dnsIP to point at the node's local dnsmasq instance. Defaults
-# to True for Origin 1.2 and OSE 3.2. False for 1.1 / 3.1 installs, this cannot
-# be used with 1.0 and 3.0.
-# openshift_use_dnsmasq=False
-
-# Global Proxy Configuration
-# These options configure HTTP_PROXY, HTTPS_PROXY, and NOPROXY environment
-# variables for docker and master services.
-#openshift_http_proxy=http://USER:PASSWORD@IPADDR:PORT
-#openshift_https_proxy=https://USER:PASSWORD@IPADDR:PORT
-#openshift_no_proxy='.hosts.example.com,some-host.com'
-#
-# Most environments don't require a proxy between openshift masters, nodes, and
-# etcd hosts. So automatically add those hostnames to the openshift_no_proxy list.
-# If all of your hosts share a common domain you may wish to disable this and
-# specify that domain above.
-#openshift_generate_no_proxy_hosts=True
-#
-# These options configure the BuildDefaults admission controller which injects
-# environment variables into Builds. These values will default to the global proxy
-# config values. You only need to set these if they differ from the global settings
-# above. See BuildDefaults
-# documentation at https://docs.openshift.org/latest/admin_guide/build_defaults_overrides.html
-#openshift_builddefaults_http_proxy=http://USER:PASSWORD@HOST:PORT
-#openshift_builddefaults_https_proxy=https://USER:PASSWORD@HOST:PORT
-#openshift_builddefaults_no_proxy=build_defaults
-#openshift_builddefaults_git_http_proxy=http://USER:PASSWORD@HOST:PORT
-#openshift_builddefaults_git_https_proxy=https://USER:PASSWORD@HOST:PORT
-# Or you may optionally define your own serialized as json
-#openshift_builddefaults_json='{"BuildDefaults":{"configuration":{"apiVersion":"v1","env":[{"name":"HTTP_PROXY","value":"http://proxy.example.com.redhat.com:3128"},{"name":"NO_PROXY","value":"ose3-master.example.com"}],"gitHTTPProxy":"http://proxy.example.com:3128","kind":"BuildDefaultsConfig"}}}'
-
-# masterConfig.volumeConfig.dynamicProvisioningEnabled, configurable as of 1.2/3.2, enabled by default
-#openshift_master_dynamic_provisioning_enabled=False
-
-# Configure usage of openshift_clock role.
-#openshift_clock_enabled=true
-
-# OpenShift Per-Service Environment Variables
-# Environment variables are added to /etc/sysconfig files for
-# each OpenShift service: node, master (api and controllers).
-# API and controllers environment variables are merged in single
-# master environments.
-#openshift_master_api_env_vars={"ENABLE_HTTP2": "true"}
-#openshift_master_controllers_env_vars={"ENABLE_HTTP2": "true"}
-#openshift_node_env_vars={"ENABLE_HTTP2": "true"}
-
-# host group for masters
-[masters]
-aep3-master[1:3]-ansible.test.example.com
-
-[etcd]
-aep3-etcd[1:3]-ansible.test.example.com
-
-[lb]
-aep3-lb-ansible.test.example.com
-
-# NOTE: Currently we require that masters be part of the SDN which requires that they also be nodes
-# However, in order to ensure that your masters are not burdened with running pods you should
-# make them unschedulable by adding openshift_schedulable=False any node that's also a master.
-[nodes]
-aep3-master[1:3]-ansible.test.example.com
-aep3-node[1:2]-ansible.test.example.com openshift_node_labels="{'region': 'primary', 'zone': 'default'}"
diff --git a/inventory/byo/hosts.aep_quickstart b/inventory/byo/hosts.aep_quickstart
deleted file mode 100644
index 46ea3a03f..000000000
--- a/inventory/byo/hosts.aep_quickstart
+++ /dev/null
@@ -1,20 +0,0 @@
-[OSEv3:children]
-masters
-nodes
-etcd
-lb
-
-[OSEv3:vars]
-ansible_ssh_user=root
-deployment_type=atomic-enterprise
-osm_use_cockpit=true
-
-[masters]
-ose3-master.example.com
-
-[nodes]
-ose3-master.example.com openshift_scheduleable=True
-
-[etcd]
-
-[lb]
diff --git a/inventory/byo/hosts.origin.example b/inventory/byo/hosts.origin.example
index 5bfb451c5..b32eb5c18 100644
--- a/inventory/byo/hosts.origin.example
+++ b/inventory/byo/hosts.origin.example
@@ -45,9 +45,6 @@ openshift_release=v1.2
# Install the openshift examples
#openshift_install_examples=true
-# Enable cluster metrics
-#use_cluster_metrics=true
-
# Configure logoutURL in the master config for console customization
# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#changing-the-logout-url
#openshift_master_logout_url=http://example.com
@@ -68,10 +65,6 @@ openshift_release=v1.2
# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#serving-static-files
#openshift_master_oauth_template=/path/to/login-template.html
-# Configure metricsPublicURL in the master config for cluster metrics
-# See: https://docs.openshift.org/latest/install_config/cluster_metrics.html
-#openshift_master_metrics_public_url=https://hawkular-metrics.example.com/hawkular/metrics
-
# Configure loggingPublicURL in the master config for aggregate logging
# See: https://docs.openshift.org/latest/install_config/aggregate_logging.html
#openshift_master_logging_public_url=https://kibana.example.com
@@ -100,26 +93,20 @@ openshift_release=v1.2
# Skip upgrading Docker during an OpenShift upgrade, leaves the current Docker version alone.
# docker_upgrade=False
-# Alternate image format string. If you're not modifying the format string and
-# only need to inject your own registry you may want to consider
-# openshift_docker_additional_registries instead
+# Alternate image format string, useful if you've got your own registry mirror
#oreg_url=example.com/openshift3/ose-${component}:${version}
# If oreg_url points to a registry other than registry.access.redhat.com we can
# modify image streams to point at that registry by setting the following to true
-#openshift_examples_modify_imagestreams=True
+#openshift_examples_modify_imagestreams=true
# Origin copr repo
#openshift_additional_repos=[{'id': 'openshift-origin-copr', 'name': 'OpenShift Origin COPR', 'baseurl': 'https://copr-be.cloud.fedoraproject.org/results/maxamillion/origin-next/epel-7-$basearch/', 'enabled': 1, 'gpgcheck': 1, 'gpgkey': 'https://copr-be.cloud.fedoraproject.org/results/maxamillion/origin-next/pubkey.gpg'}]
-# Origin Fedora copr repo
-# Use this if you are installing on Fedora
-#openshift_additional_repos=[{'id': 'fedora-openshift-origin-copr', 'name': 'OpenShift Origin COPR for Fedora', 'baseurl': 'https://copr-be.cloud.fedoraproject.org/results/maxamillion/fedora-openshift/fedora-$releasever-$basearch/', 'enabled': 1, 'gpgcheck': 1, 'gpgkey': 'https://copr-be.cloud.fedoraproject.org/results/maxamillion/fedora-openshift/pubkey.gpg'}]
-
# htpasswd auth
openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider', 'filename': '/etc/origin/master/htpasswd'}]
# Defining htpasswd users
-#openshift_master_htpasswd_users={'user1': '<pre-hashed password>', 'user2': '<pre-hashed password>'
+#openshift_master_htpasswd_users={'user1': '<pre-hashed password>', 'user2': '<pre-hashed password>'}
# or
#openshift_master_htpasswd_file=<path to local pre-generated htpasswd file>
@@ -262,6 +249,9 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true',
# Provide local certificate paths which will be configured as the
# router's default certificate.
#openshift_hosted_router_certificate={"certfile": "/path/to/router.crt", "keyfile": "/path/to/router.key", "cafile": "/path/to/router-ca.crt"}
+#
+# Disable management of the OpenShift Router
+#openshift_hosted_manage_router=false
# Openshift Registry Options
#
@@ -283,6 +273,9 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true',
# Unless specified, openshift-ansible will calculate the replica count
# based on the number of nodes matching the openshift registry selector.
#openshift_hosted_registry_replicas=2
+#
+# Disable management of the OpenShift Registry
+#openshift_hosted_manage_registry=false
# Registry Storage Options
#
@@ -327,17 +320,71 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true',
#openshift_hosted_registry_storage_s3_chunksize=26214400
#openshift_hosted_registry_pullthrough=true
+# Metrics deployment
+# See: https://docs.openshift.com/enterprise/latest/install_config/cluster_metrics.html
+#
+# By default metrics are not automatically deployed, set this to enable them
+# openshift_hosted_metrics_deploy=true
+#
+# Storage Options
+# If openshift_hosted_metrics_storage_kind is unset then metrics will be stored
+# in an EmptyDir volume and will be deleted when the cassandra pod terminates.
+# Storage options A & B currently support only one cassandra pod which is
+# generally enough for up to 1000 pods. Additional volumes can be created
+# manually after the fact and metrics scaled per the docs.
+#
+# Option A - NFS Host Group
+# An NFS volume will be created with path "nfs_directory/volume_name"
+# on the host within the [nfs] host group. For example, the volume
+# path using these options would be "/exports/metrics"
+#openshift_hosted_metrics_storage_kind=nfs
+#openshift_hosted_metrics_storage_access_modes=['ReadWriteOnce']
+#openshift_hosted_metrics_storage_nfs_directory=/exports
+#openshift_hosted_metrics_storage_nfs_options='*(rw,root_squash)'
+#openshift_hosted_metrics_storage_volume_name=metrics
+#openshift_hosted_metrics_storage_volume_size=10Gi
+#
+# Option B - External NFS Host
+# NFS volume must already exist with path "nfs_directory/_volume_name" on
+# the storage_host. For example, the remote volume path using these
+# options would be "nfs.example.com:/exports/metrics"
+#openshift_hosted_metrics_storage_kind=nfs
+#openshift_hosted_metrics_storage_access_modes=['ReadWriteOnce']
+#openshift_hosted_metrics_storage_host=nfs.example.com
+#openshift_hosted_metrics_storage_nfs_directory=/exports
+#openshift_hosted_metrics_storage_volume_name=metrics
+#openshift_hosted_metrics_storage_volume_size=10Gi
+#
+# Option C - Dynamic -- If openshift supports dynamic volume provisioning for
+# your cloud platform use this.
+#openshift_hosted_metrics_storage_kind=dynamic
+#
+# Override metricsPublicURL in the master config for cluster metrics
+# Defaults to https://hawkular-metrics.{{openshift_master_default_subdomain}}/hawkular/metrics
+#openshift_hosted_metrics_public_url=https://hawkular-metrics.example.com/hawkular/metrics
+
# Configure the multi-tenant SDN plugin (default is 'redhat/openshift-ovs-subnet')
# os_sdn_network_plugin_name='redhat/openshift-ovs-multitenant'
# Disable the OpenShift SDN plugin
# openshift_use_openshift_sdn=False
-# Configure SDN cluster network CIDR block. This network block should
-# be a private block and should not conflict with existing network
-# blocks in your infrastructure that pods may require access to.
-# Can not be changed after deployment.
+# Configure SDN cluster network and kubernetes service CIDR blocks. These
+# network blocks should be private and should not conflict with network blocks
+# in your infrastructure that pods may require access to. Can not be changed
+# after deployment.
#osm_cluster_network_cidr=10.1.0.0/16
+#openshift_portal_net=172.30.0.0/16
+
+
+# ExternalIPNetworkCIDRs controls what values are acceptable for the
+# service external IP field. If empty, no externalIP may be set. It
+# may contain a list of CIDRs which are checked for access. If a CIDR
+# is prefixed with !, IPs in that CIDR will be rejected. Rejections
+# will be applied first, then the IP checked against one of the
+# allowed CIDRs. You should ensure this range does not overlap with
+# your nodes, pods, or service CIDRs for security reasons.
+#openshift_master_external_ip_network_cidrs=['0.0.0.0/0']
# Configure number of bits to allocate to each host’s subnet e.g. 8
# would mean a /24 network on the host.
@@ -350,19 +397,38 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true',
# set RPM version for debugging purposes
#openshift_pkg_version=-1.1
-# Configure custom named certificates
+# Configure custom ca certificate
+#openshift_master_ca_certificate={'certfile': '/path/to/ca.crt', 'keyfile': '/path/to/ca.key'}
+#
+# NOTE: CA certificate will not be replaced with existing clusters.
+# This option may only be specified when creating a new cluster or
+# when redeploying cluster certificates with the redeploy-certificates
+# playbook. If replacing the CA certificate in an existing cluster
+# with a custom ca certificate, the following variable must also be
+# set.
+#openshift_certificates_redeploy_ca=true
+
+# Configure custom named certificates (SNI certificates)
+#
+# https://docs.openshift.org/latest/install_config/certificate_customization.html
+#
# NOTE: openshift_master_named_certificates is cached on masters and is an
# additive fact, meaning that each run with a different set of certificates
# will add the newly provided certificates to the cached set of certificates.
+#
+# An optional CA may be specified for each named certificate. CAs will
+# be added to the OpenShift CA bundle which allows for the named
+# certificate to be served for internal cluster communication.
+#
# If you would like openshift_master_named_certificates to be overwritten with
# the provided value, specify openshift_master_overwrite_named_certificates.
#openshift_master_overwrite_named_certificates=true
#
# Provide local certificate paths which will be deployed to masters
-#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key"}]
+#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "cafile": "/path/to/custom-ca1.crt"}]
#
# Detected names may be overridden by specifying the "names" key
-#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "names": ["public-master-host.com"]}]
+#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "names": ["public-master-host.com"], "cafile": "/path/to/custom-ca1.crt"}]
# Session options
#openshift_master_session_name=ssn
@@ -397,7 +463,7 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true',
#openshift_dns_ip=172.30.0.1
# Configure node kubelet arguments
-#openshift_node_kubelet_args={'max-pods': ['110'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']}
+#openshift_node_kubelet_args={'pods-per-core': ['10'], 'max-pods': ['250'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']}
# Configure logrotate scripts
# See: https://github.com/nickhammond/ansible-logrotate
diff --git a/inventory/byo/hosts.ose.example b/inventory/byo/hosts.ose.example
index 96a9db30d..5aaf6695a 100644
--- a/inventory/byo/hosts.ose.example
+++ b/inventory/byo/hosts.ose.example
@@ -6,6 +6,7 @@ masters
nodes
etcd
lb
+nfs
# Set variables common for all OSEv3 hosts
[OSEv3:vars]
@@ -44,9 +45,6 @@ openshift_release=v3.2
# Install the openshift examples
#openshift_install_examples=true
-# Enable cluster metrics
-#use_cluster_metrics=true
-
# Configure logoutURL in the master config for console customization
# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#changing-the-logout-url
#openshift_master_logout_url=http://example.com
@@ -67,10 +65,6 @@ openshift_release=v3.2
# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#serving-static-files
#openshift_master_oauth_template=/path/to/login-template.html
-# Configure metricsPublicURL in the master config for cluster metrics
-# See: https://docs.openshift.com/enterprise/latest/install_config/cluster_metrics.html
-#openshift_master_metrics_public_url=https://hawkular-metrics.example.com/hawkular/metrics
-
# Configure loggingPublicURL in the master config for aggregate logging
# See: https://docs.openshift.com/enterprise/latest/install_config/aggregate_logging.html
#openshift_master_logging_public_url=https://kibana.example.com
@@ -99,13 +93,11 @@ openshift_release=v3.2
# Skip upgrading Docker during an OpenShift upgrade, leaves the current Docker version alone.
# docker_upgrade=False
-# Alternate image format string. If you're not modifying the format string and
-# only need to inject your own registry you may want to consider
-# openshift_docker_additional_registries instead
+# Alternate image format string, useful if you've got your own registry mirror
#oreg_url=example.com/openshift3/ose-${component}:${version}
# If oreg_url points to a registry other than registry.access.redhat.com we can
# modify image streams to point at that registry by setting the following to true
-#openshift_examples_modify_imagestreams=True
+#openshift_examples_modify_imagestreams=true
# Additional yum repos to install
#openshift_additional_repos=[{'id': 'ose-devel', 'name': 'ose-devel', 'baseurl': 'http://example.com/puddle/build/AtomicOpenShift/3.1/latest/RH7-RHOSE-3.0/$basearch/os', 'enabled': 1, 'gpgcheck': 0}]
@@ -113,7 +105,7 @@ openshift_release=v3.2
# htpasswd auth
openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider', 'filename': '/etc/origin/master/htpasswd'}]
# Defining htpasswd users
-#openshift_master_htpasswd_users={'user1': '<pre-hashed password>', 'user2': '<pre-hashed password>'
+#openshift_master_htpasswd_users={'user1': '<pre-hashed password>', 'user2': '<pre-hashed password>'}
# or
#openshift_master_htpasswd_file=<path to local pre-generated htpasswd file>
@@ -256,6 +248,9 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true',
# Provide local certificate paths which will be configured as the
# router's default certificate.
#openshift_hosted_router_certificate={"certfile": "/path/to/router.crt", "keyfile": "/path/to/router.key", "cafile": "/path/to/router-ca.crt"}
+#
+# Disable management of the OpenShift Router
+#openshift_hosted_manage_router=false
# Openshift Registry Options
#
@@ -277,6 +272,9 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true',
# Unless specified, openshift-ansible will calculate the replica count
# based on the number of nodes matching the openshift registry selector.
#openshift_hosted_registry_replicas=2
+#
+# Disable management of the OpenShift Registry
+#openshift_hosted_manage_registry=false
# Registry Storage Options
#
@@ -321,17 +319,72 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true',
#openshift_hosted_registry_storage_s3_chunksize=26214400
#openshift_hosted_registry_pullthrough=true
+# Metrics deployment
+# See: https://docs.openshift.com/enterprise/latest/install_config/cluster_metrics.html
+#
+# By default metrics are not automatically deployed, set this to enable them
+# openshift_hosted_metrics_deploy=true
+#
+# Storage Options
+# If openshift_hosted_metrics_storage_kind is unset then metrics will be stored
+# in an EmptyDir volume and will be deleted when the cassandra pod terminates.
+# Storage options A & B currently support only one cassandra pod which is
+# generally enough for up to 1000 pods. Additional volumes can be created
+# manually after the fact and metrics scaled per the docs.
+#
+# Option A - NFS Host Group
+# An NFS volume will be created with path "nfs_directory/volume_name"
+# on the host within the [nfs] host group. For example, the volume
+# path using these options would be "/exports/metrics"
+#openshift_hosted_metrics_storage_kind=nfs
+#openshift_hosted_metrics_storage_access_modes=['ReadWriteOnce']
+#openshift_hosted_metrics_storage_nfs_directory=/exports
+#openshift_hosted_metrics_storage_nfs_options='*(rw,root_squash)'
+#openshift_hosted_metrics_storage_volume_name=metrics
+#openshift_hosted_metrics_storage_volume_size=10Gi
+#
+# Option B - External NFS Host
+# NFS volume must already exist with path "nfs_directory/_volume_name" on
+# the storage_host. For example, the remote volume path using these
+# options would be "nfs.example.com:/exports/metrics"
+#openshift_hosted_metrics_storage_kind=nfs
+#openshift_hosted_metrics_storage_access_modes=['ReadWriteOnce']
+#openshift_hosted_metrics_storage_host=nfs.example.com
+#openshift_hosted_metrics_storage_nfs_directory=/exports
+#openshift_hosted_metrics_storage_volume_name=metrics
+#openshift_hosted_metrics_storage_volume_size=10Gi
+#
+# Option C - Dynamic -- If openshift supports dynamic volume provisioning for
+# your cloud platform use this.
+#openshift_hosted_metrics_storage_kind=dynamic
+#
+# Override metricsPublicURL in the master config for cluster metrics
+# Defaults to https://hawkular-metrics.{{openshift_master_default_subdomain}}/hawkular/metrics
+#openshift_hosted_metrics_public_url=https://hawkular-metrics.example.com/hawkular/metrics
+
+
# Configure the multi-tenant SDN plugin (default is 'redhat/openshift-ovs-subnet')
# os_sdn_network_plugin_name='redhat/openshift-ovs-multitenant'
# Disable the OpenShift SDN plugin
# openshift_use_openshift_sdn=False
-# Configure SDN cluster network CIDR block. This network block should
-# be a private block and should not conflict with existing network
-# blocks in your infrastructure that pods may require access to.
-# Can not be changed after deployment.
+# Configure SDN cluster network and kubernetes service CIDR blocks. These
+# network blocks should be private and should not conflict with network blocks
+# in your infrastructure that pods may require access to. Can not be changed
+# after deployment.
#osm_cluster_network_cidr=10.1.0.0/16
+#openshift_portal_net=172.30.0.0/16
+
+
+# ExternalIPNetworkCIDRs controls what values are acceptable for the
+# service external IP field. If empty, no externalIP may be set. It
+# may contain a list of CIDRs which are checked for access. If a CIDR
+# is prefixed with !, IPs in that CIDR will be rejected. Rejections
+# will be applied first, then the IP checked against one of the
+# allowed CIDRs. You should ensure this range does not overlap with
+# your nodes, pods, or service CIDRs for security reasons.
+#openshift_master_external_ip_network_cidrs=['0.0.0.0/0']
# Configure number of bits to allocate to each host’s subnet e.g. 8
# would mean a /24 network on the host.
@@ -344,19 +397,38 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true',
# set RPM version for debugging purposes
#openshift_pkg_version=-3.1.0.0
-# Configure custom named certificates
+# Configure custom ca certificate
+#openshift_master_ca_certificate={'certfile': '/path/to/ca.crt', 'keyfile': '/path/to/ca.key'}
+#
+# NOTE: CA certificate will not be replaced with existing clusters.
+# This option may only be specified when creating a new cluster or
+# when redeploying cluster certificates with the redeploy-certificates
+# playbook. If replacing the CA certificate in an existing cluster
+# with a custom ca certificate, the following variable must also be
+# set.
+#openshift_certificates_redeploy_ca=true
+
+# Configure custom named certificates (SNI certificates)
+#
+# https://docs.openshift.com/enterprise/latest/install_config/certificate_customization.html
+#
# NOTE: openshift_master_named_certificates is cached on masters and is an
# additive fact, meaning that each run with a different set of certificates
# will add the newly provided certificates to the cached set of certificates.
+#
+# An optional CA may be specified for each named certificate. CAs will
+# be added to the OpenShift CA bundle which allows for the named
+# certificate to be served for internal cluster communication.
+#
# If you would like openshift_master_named_certificates to be overwritten with
# the provided value, specify openshift_master_overwrite_named_certificates.
#openshift_master_overwrite_named_certificates=true
#
# Provide local certificate paths which will be deployed to masters
-#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key"}]
+#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "cafile": "/path/to/custom-ca1.crt"}]
#
# Detected names may be overridden by specifying the "names" key
-#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "names": ["public-master-host.com"]}]
+#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "names": ["public-master-host.com"], "cafile": "/path/to/custom-ca1.crt"}]
# Session options
#openshift_master_session_name=ssn
@@ -391,7 +463,7 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true',
#openshift_dns_ip=172.30.0.1
# Configure node kubelet arguments
-#openshift_node_kubelet_args={'max-pods': ['110'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']}
+#openshift_node_kubelet_args={'pods-per-core': ['10'], 'max-pods': ['250'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']}
# Configure logrotate scripts
# See: https://github.com/nickhammond/ansible-logrotate