diff options
Diffstat (limited to 'inventory/byo')
| -rw-r--r-- | inventory/byo/hosts.aep.example | 158 | ||||
| -rw-r--r-- | inventory/byo/hosts.origin.example | 197 | ||||
| -rw-r--r-- | inventory/byo/hosts.ose.example | 218 |
3 files changed, 378 insertions, 195 deletions
diff --git a/inventory/byo/hosts.aep.example b/inventory/byo/hosts.aep.example index 34b57e4a6..cff003a9c 100644 --- a/inventory/byo/hosts.aep.example +++ b/inventory/byo/hosts.aep.example @@ -6,6 +6,7 @@ masters nodes etcd lb +nfs # Set variables common for all OSEv3 hosts [OSEv3:vars] @@ -24,12 +25,26 @@ debug_level=2 # deployment type valid values are origin, online, atomic-enterprise, and openshift-enterprise deployment_type=atomic-enterprise +# Specify the generic release of OpenShift to install. This is used mainly just during installation, after which we +# rely on the version running on the first master. Works best for containerized installs where we can usually +# use this to lookup the latest exact version of the container images, which is the tag actually used to configure +# the cluster. For RPM installations we just verify the version detected in your configured repos matches this +# release. +openshift_release=v3.2 + +# Specify an exact container image tag to install or configure. +# WARNING: This value will be used for all hosts in containerized environments, even those that have another version installed. +# This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. +#openshift_image_tag=v3.2.0.46 + +# Specify an exact rpm version to install or configure. +# WARNING: This value will be used for all hosts in RPM based environments, even those that have another version installed. +# This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. +#openshift_pkg_version=-3.2.0.46 + # Install the openshift examples #openshift_install_examples=true -# Enable cluster metrics -#use_cluster_metrics=true - # Configure logoutURL in the master config for console customization # See: https://docs.openshift.org/latest/install_config/web_console_customization.html#changing-the-logout-url #openshift_master_logout_url=http://example.com @@ -75,6 +90,13 @@ deployment_type=atomic-enterprise # Default value: "--log-driver=json-file --log-opt max-size=50m" #openshift_docker_options="-l warn --ipv6=false" +# Specify exact version of Docker to configure or upgrade to. +# Downgrades are not supported and will error out. Be careful when upgrading docker from < 1.10 to > 1.10. +# docker_version="1.10.3" + +# Skip upgrading Docker during an OpenShift upgrade, leaves the current Docker version alone. +# docker_upgrade=False + # Alternate image format string. If you're not modifying the format string and # only need to inject your own registry you may want to consider # openshift_docker_additional_registries instead @@ -89,7 +111,7 @@ deployment_type=atomic-enterprise # htpasswd auth openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider', 'filename': '/etc/origin/master/htpasswd'}] # Defining htpasswd users -#openshift_master_htpasswd_users={'user1': '<pre-hashed password>', 'user2': '<pre-hashed password>' +#openshift_master_htpasswd_users={'user1': '<pre-hashed password>', 'user2': '<pre-hashed password>'} # or #openshift_master_htpasswd_file=<path to local pre-generated htpasswd file> @@ -140,6 +162,9 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #osm_mcs_labels_per_project=5 #osm_uid_allocator_range='1000000000-1999999999/10000' +# Configure additional projects +#openshift_additional_projects={'my-project': {'default_node_selector': 'label=value'}} + # Enable cockpit #osm_use_cockpit=true # @@ -220,10 +245,15 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # based on the number of nodes matching the openshift router selector. #openshift_hosted_router_replicas=2 # +# Router force subdomain (optional) +# A router path format to force on all routes used by this router +# (will ignore the route host value) +#openshift_hosted_router_force_subdomain='${name}-${namespace}.apps.example.com' +# # Router certificate (optional) # Provide local certificate paths which will be configured as the # router's default certificate. -#openshift_hosted_router_certificate={"certfile": "/path/to/router.crt", "keyfile": "/path/to/router.key"} +#openshift_hosted_router_certificate={"certfile": "/path/to/router.crt", "keyfile": "/path/to/router.key", "cafile": "/path/to/router-ca.crt"} # Openshift Registry Options # @@ -239,7 +269,54 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Registry selector (optional) # Registry will only be created if nodes matching this label are present. # Default value: 'region=infra' -#openshift_registry_selector='region=infra' +#openshift_hosted_registry_selector='region=infra' +# +# Registry replicas (optional) +# Unless specified, openshift-ansible will calculate the replica count +# based on the number of nodes matching the openshift registry selector. +#openshift_hosted_registry_replicas=2 + +# Registry Storage Options +# +# NFS Host Group +# An NFS volume will be created with path "nfs_directory/volume_name" +# on the host within the [nfs] host group. For example, the volume +# path using these options would be "/exports/registry" +#openshift_hosted_registry_storage_kind=nfs +#openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] +#openshift_hosted_registry_storage_nfs_directory=/exports +#openshift_hosted_registry_storage_nfs_options='*(rw,root_squash)' +#openshift_hosted_registry_storage_volume_name=registry +#openshift_hosted_registry_storage_volume_size=10Gi +# +# External NFS Host +# NFS volume must already exist with path "nfs_directory/_volume_name" on +# the storage_host. For example, the remote volume path using these +# options would be "nfs.example.com:/exports/registry" +#openshift_hosted_registry_storage_kind=nfs +#openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] +#openshift_hosted_registry_storage_host=nfs.example.com +#openshift_hosted_registry_storage_nfs_directory=/exports +#openshift_hosted_registry_storage_volume_name=registry +#openshift_hosted_registry_storage_volume_size=10Gi +# +# Openstack +# Volume must already exist. +#openshift_hosted_registry_storage_kind=openstack +#openshift_hosted_registry_storage_access_modes=['ReadWriteOnce'] +#openshift_hosted_registry_storage_openstack_filesystem=ext4 +#openshift_hosted_registry_storage_openstack_volumeID=3a650b4f-c8c5-4e0a-8ca5-eaee11f16c57 +#openshift_hosted_registry_storage_volume_size=10Gi +# +# AWS S3 +# S3 bucket must already exist. +#openshift_hosted_registry_storage_kind=object +#openshift_hosted_registry_storage_provider=s3 +#openshift_hosted_registry_storage_s3_accesskey=aws_access_key_id +#openshift_hosted_registry_storage_s3_secretkey=aws_secret_access_key +#openshift_hosted_registry_storage_s3_bucket=bucket_name +#openshift_hosted_registry_storage_s3_region=bucket_region +#openshift_hosted_registry_storage_s3_chunksize=26214400 # Configure the multi-tenant SDN plugin (default is 'redhat/openshift-ovs-subnet') # os_sdn_network_plugin_name='redhat/openshift-ovs-multitenant' @@ -247,11 +324,12 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Disable the OpenShift SDN plugin # openshift_use_openshift_sdn=False -# Configure SDN cluster network CIDR block. This network block should -# be a private block and should not conflict with existing network -# blocks in your infrastructure that pods may require access to. -# Can not be changed after deployment. +# Configure SDN cluster network and kubernetes service CIDR blocks. These +# network blocks should be private and should not conflict with network blocks +# in your infrastructure that pods may require access to. Can not be changed +# after deployment. #osm_cluster_network_cidr=10.1.0.0/16 +#openshift_portal_net=172.30.0.0/16 # Configure number of bits to allocate to each host’s subnet e.g. 8 # would mean a /24 network on the host. @@ -268,15 +346,20 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # NOTE: openshift_master_named_certificates is cached on masters and is an # additive fact, meaning that each run with a different set of certificates # will add the newly provided certificates to the cached set of certificates. +# +# An optional CA may be specified for each named certificate. CAs will +# be added to the OpenShift CA bundle which allows for the named +# certificate to be served for internal cluster communication. +# # If you would like openshift_master_named_certificates to be overwritten with # the provided value, specify openshift_master_overwrite_named_certificates. #openshift_master_overwrite_named_certificates=true # # Provide local certificate paths which will be deployed to masters -#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key"}] +#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "cafile": "/path/to/custom-ca1.crt"}] # # Detected names may be overridden by specifying the "names" key -#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "names": ["public-master-host.com"]}] +#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "names": ["public-master-host.com"], "cafile": "/path/to/custom-ca1.crt"}] # Session options #openshift_master_session_name=ssn @@ -310,57 +393,6 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Configure dnsIP in the node config #openshift_dns_ip=172.30.0.1 -# Persistent Storage Options -# -## Registry Storage Options -## -## Storage Kind -## Specifies which storage kind will be used for the registry. -## "nfs" and "openstack" are supported kinds at this time. -##openshift_hosted_registry_storage_kind=nfs -## -## Persistent Volume Access Mode -## When using the 'openstack' storage kind, this has to be 'ReadWriteOnce' -##openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] -## -## Registry Volume Name -## Specify the storage volume name. This directory will be created -## within openshift_hosted_registry_storage_nfs_directory if -## specifying an [nfs] group. Ex. /exports/registry -## This variable must be supplied if using a pre-existing nfs server. -##openshift_hosted_registry_storage_volume_name=registry -## -## NFS Specific Options -## -## Storage Host -## This variable can be used to identify a pre-existing storage host -## if a storage host group corresponding to the storage kind (such as -## [nfs]) is not specified, -##openshift_hosted_registry_storage_host=nfs.example.com -## -## NFS Export Options -##openshift_hosted_registry_storage_nfs_options='*(rw,root_squash)' -## -## NFS Export Directory -## Specify the root exports directory. This directory will be created -## if specifying an [nfs] host group. -## This variable must be supplied if using a pre-existing nfs server. -##openshift_hosted_registry_storage_nfs_directory=/exports -## -## Openstack Specific Options -## -## Openstack Volume ID -## Specify the identifier of the volume to use for the registry. -## At this time, the volume has to be created manually by the administrator. -##openshift_hosted_registry_storage_openstack_volumeID=3a650b4f-c8c5-4e0a-8ca5-eaee11f16c57 -## -## Openstack Volume Size -##openshift_hosted_registry_storage_volume_size=10Gi -## -## Openstack Volume Filesystem -## Specify the filesystem that will be used when formatting the volume -##openshift_hosted_registry_storage_openstack_filesystem=ext4 - # Configure node kubelet arguments #openshift_node_kubelet_args={'max-pods': ['110'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']} diff --git a/inventory/byo/hosts.origin.example b/inventory/byo/hosts.origin.example index 009731777..d7db63383 100644 --- a/inventory/byo/hosts.origin.example +++ b/inventory/byo/hosts.origin.example @@ -25,12 +25,26 @@ debug_level=2 # deployment type valid values are origin, online, atomic-enterprise and openshift-enterprise deployment_type=origin +# Specify the generic release of OpenShift to install. This is used mainly just during installation, after which we +# rely on the version running on the first master. Works best for containerized installs where we can usually +# use this to lookup the latest exact version of the container images, which is the tag actually used to configure +# the cluster. For RPM installations we just verify the version detected in your configured repos matches this +# release. +openshift_release=v1.2 + +# Specify an exact container image tag to install or configure. +# WARNING: This value will be used for all hosts in containerized environments, even those that have another version installed. +# This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. +#openshift_image_tag=v1.2.0 + +# Specify an exact rpm version to install or configure. +# WARNING: This value will be used for all hosts in RPM based environments, even those that have another version installed. +# This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. +#openshift_pkg_version=-1.2.0 + # Install the openshift examples #openshift_install_examples=true -# Enable cluster metrics -#use_cluster_metrics=true - # Configure logoutURL in the master config for console customization # See: https://docs.openshift.org/latest/install_config/web_console_customization.html#changing-the-logout-url #openshift_master_logout_url=http://example.com @@ -76,6 +90,13 @@ deployment_type=origin # Default value: "--log-driver=json-file --log-opt max-size=50m" #openshift_docker_options="-l warn --ipv6=false" +# Specify exact version of Docker to configure or upgrade to. +# Downgrades are not supported and will error out. Be careful when upgrading docker from < 1.10 to > 1.10. +# docker_version="1.10.3" + +# Skip upgrading Docker during an OpenShift upgrade, leaves the current Docker version alone. +# docker_upgrade=False + # Alternate image format string. If you're not modifying the format string and # only need to inject your own registry you may want to consider # openshift_docker_additional_registries instead @@ -88,14 +109,10 @@ deployment_type=origin # Origin copr repo #openshift_additional_repos=[{'id': 'openshift-origin-copr', 'name': 'OpenShift Origin COPR', 'baseurl': 'https://copr-be.cloud.fedoraproject.org/results/maxamillion/origin-next/epel-7-$basearch/', 'enabled': 1, 'gpgcheck': 1, 'gpgkey': 'https://copr-be.cloud.fedoraproject.org/results/maxamillion/origin-next/pubkey.gpg'}] -# Origin Fedora copr repo -# Use this if you are installing on Fedora -#openshift_additional_repos=[{'id': 'fedora-openshift-origin-copr', 'name': 'OpenShift Origin COPR for Fedora', 'baseurl': 'https://copr-be.cloud.fedoraproject.org/results/maxamillion/fedora-openshift/fedora-$releasever-$basearch/', 'enabled': 1, 'gpgcheck': 1, 'gpgkey': 'https://copr-be.cloud.fedoraproject.org/results/maxamillion/fedora-openshift/pubkey.gpg'}] - # htpasswd auth openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider', 'filename': '/etc/origin/master/htpasswd'}] # Defining htpasswd users -#openshift_master_htpasswd_users={'user1': '<pre-hashed password>', 'user2': '<pre-hashed password>' +#openshift_master_htpasswd_users={'user1': '<pre-hashed password>', 'user2': '<pre-hashed password>'} # or #openshift_master_htpasswd_file=<path to local pre-generated htpasswd file> @@ -146,6 +163,9 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #osm_mcs_labels_per_project=5 #osm_uid_allocator_range='1000000000-1999999999/10000' +# Configure additional projects +#openshift_additional_projects={'my-project': {'default_node_selector': 'label=value'}} + # Enable cockpit #osm_use_cockpit=true # @@ -226,10 +246,18 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # based on the number of nodes matching the openshift router selector. #openshift_hosted_router_replicas=2 # +# Router force subdomain (optional) +# A router path format to force on all routes used by this router +# (will ignore the route host value) +#openshift_hosted_router_force_subdomain='${name}-${namespace}.apps.example.com' +# # Router certificate (optional) # Provide local certificate paths which will be configured as the # router's default certificate. -#openshift_hosted_router_certificate={"certfile": "/path/to/router.crt", "keyfile": "/path/to/router.key"} +#openshift_hosted_router_certificate={"certfile": "/path/to/router.crt", "keyfile": "/path/to/router.key", "cafile": "/path/to/router-ca.crt"} +# +# Disable management of the OpenShift Router +#openshift_hosted_manage_router=false # Openshift Registry Options # @@ -245,7 +273,58 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Registry selector (optional) # Registry will only be created if nodes matching this label are present. # Default value: 'region=infra' -#openshift_registry_selector='region=infra' +#openshift_hosted_registry_selector='region=infra' +# +# Registry replicas (optional) +# Unless specified, openshift-ansible will calculate the replica count +# based on the number of nodes matching the openshift registry selector. +#openshift_hosted_registry_replicas=2 +# +# Disable management of the OpenShift Registry +#openshift_hosted_manage_registry=false + +# Registry Storage Options +# +# NFS Host Group +# An NFS volume will be created with path "nfs_directory/volume_name" +# on the host within the [nfs] host group. For example, the volume +# path using these options would be "/exports/registry" +#openshift_hosted_registry_storage_kind=nfs +#openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] +#openshift_hosted_registry_storage_nfs_directory=/exports +#openshift_hosted_registry_storage_nfs_options='*(rw,root_squash)' +#openshift_hosted_registry_storage_volume_name=registry +#openshift_hosted_registry_storage_volume_size=10Gi +# +# External NFS Host +# NFS volume must already exist with path "nfs_directory/_volume_name" on +# the storage_host. For example, the remote volume path using these +# options would be "nfs.example.com:/exports/registry" +#openshift_hosted_registry_storage_kind=nfs +#openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] +#openshift_hosted_registry_storage_host=nfs.example.com +#openshift_hosted_registry_storage_nfs_directory=/exports +#openshift_hosted_registry_storage_volume_name=registry +#openshift_hosted_registry_storage_volume_size=10Gi +# +# Openstack +# Volume must already exist. +#openshift_hosted_registry_storage_kind=openstack +#openshift_hosted_registry_storage_access_modes=['ReadWriteOnce'] +#openshift_hosted_registry_storage_openstack_filesystem=ext4 +#openshift_hosted_registry_storage_openstack_volumeID=3a650b4f-c8c5-4e0a-8ca5-eaee11f16c57 +#openshift_hosted_registry_storage_volume_size=10Gi +# +# AWS S3 +# S3 bucket must already exist. +#openshift_hosted_registry_storage_kind=object +#openshift_hosted_registry_storage_provider=s3 +#openshift_hosted_registry_storage_s3_accesskey=aws_access_key_id +#openshift_hosted_registry_storage_s3_secretkey=aws_secret_access_key +#openshift_hosted_registry_storage_s3_bucket=bucket_name +#openshift_hosted_registry_storage_s3_region=bucket_region +#openshift_hosted_registry_storage_s3_chunksize=26214400 +#openshift_hosted_registry_pullthrough=true # Configure the multi-tenant SDN plugin (default is 'redhat/openshift-ovs-subnet') # os_sdn_network_plugin_name='redhat/openshift-ovs-multitenant' @@ -253,11 +332,22 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Disable the OpenShift SDN plugin # openshift_use_openshift_sdn=False -# Configure SDN cluster network CIDR block. This network block should -# be a private block and should not conflict with existing network -# blocks in your infrastructure that pods may require access to. -# Can not be changed after deployment. +# Configure SDN cluster network and kubernetes service CIDR blocks. These +# network blocks should be private and should not conflict with network blocks +# in your infrastructure that pods may require access to. Can not be changed +# after deployment. #osm_cluster_network_cidr=10.1.0.0/16 +#openshift_portal_net=172.30.0.0/16 + + +# ExternalIPNetworkCIDRs controls what values are acceptable for the +# service external IP field. If empty, no externalIP may be set. It +# may contain a list of CIDRs which are checked for access. If a CIDR +# is prefixed with !, IPs in that CIDR will be rejected. Rejections +# will be applied first, then the IP checked against one of the +# allowed CIDRs. You should ensure this range does not overlap with +# your nodes, pods, or service CIDRs for security reasons. +#openshift_master_external_ip_network_cidrs=['0.0.0.0/0'] # Configure number of bits to allocate to each host’s subnet e.g. 8 # would mean a /24 network on the host. @@ -270,19 +360,38 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # set RPM version for debugging purposes #openshift_pkg_version=-1.1 -# Configure custom named certificates +# Configure custom ca certificate +#openshift_master_ca_certificate={'certfile': '/path/to/ca.crt', 'keyfile': '/path/to/ca.key'} +# +# NOTE: CA certificate will not be replaced with existing clusters. +# This option may only be specified when creating a new cluster or +# when redeploying cluster certificates with the redeploy-certificates +# playbook. If replacing the CA certificate in an existing cluster +# with a custom ca certificate, the following variable must also be +# set. +#openshift_certificates_redeploy_ca=true + +# Configure custom named certificates (SNI certificates) +# +# https://docs.openshift.org/latest/install_config/certificate_customization.html +# # NOTE: openshift_master_named_certificates is cached on masters and is an # additive fact, meaning that each run with a different set of certificates # will add the newly provided certificates to the cached set of certificates. +# +# An optional CA may be specified for each named certificate. CAs will +# be added to the OpenShift CA bundle which allows for the named +# certificate to be served for internal cluster communication. +# # If you would like openshift_master_named_certificates to be overwritten with # the provided value, specify openshift_master_overwrite_named_certificates. #openshift_master_overwrite_named_certificates=true # # Provide local certificate paths which will be deployed to masters -#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key"}] +#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "cafile": "/path/to/custom-ca1.crt"}] # # Detected names may be overridden by specifying the "names" key -#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "names": ["public-master-host.com"]}] +#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "names": ["public-master-host.com"], "cafile": "/path/to/custom-ca1.crt"}] # Session options #openshift_master_session_name=ssn @@ -316,57 +425,6 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Configure dnsIP in the node config #openshift_dns_ip=172.30.0.1 -# Persistent Storage Options -# -## Registry Storage Options -## -## Storage Kind -## Specifies which storage kind will be used for the registry. -## "nfs" and "openstack" are supported kinds at this time. -##openshift_hosted_registry_storage_kind=nfs -## -## Persistent Volume Access Mode -## When using the 'openstack' storage kind, this has to be 'ReadWriteOnce' -##openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] -## -## Registry Volume Name -## Specify the storage volume name. This directory will be created -## within openshift_hosted_registry_storage_nfs_directory if -## specifying an [nfs] group. Ex. /exports/registry -## This variable must be supplied if using a pre-existing nfs server. -##openshift_hosted_registry_storage_volume_name=registry -## -## NFS Specific Options -## -## Storage Host -## This variable can be used to identify a pre-existing storage host -## if a storage host group corresponding to the storage kind (such as -## [nfs]) is not specified, -##openshift_hosted_registry_storage_host=nfs.example.com -## -## NFS Export Options -##openshift_hosted_registry_storage_nfs_options='*(rw,root_squash)' -## -## NFS Export Directory -## Specify the root exports directory. This directory will be created -## if specifying an [nfs] host group. -## This variable must be supplied if using a pre-existing nfs server. -##openshift_hosted_registry_storage_nfs_directory=/exports -## -## Openstack Specific Options -## -## Openstack Volume ID -## Specify the identifier of the volume to use for the registry. -## At this time, the volume has to be created manually by the administrator. -##openshift_hosted_registry_storage_openstack_volumeID=3a650b4f-c8c5-4e0a-8ca5-eaee11f16c57 -## -## Openstack Volume Size -##openshift_hosted_registry_storage_volume_size=10Gi -## -## Openstack Volume Filesystem -## Specify the filesystem that will be used when formatting the volume -##openshift_hosted_registry_storage_openstack_filesystem=ext4 - # Configure node kubelet arguments #openshift_node_kubelet_args={'max-pods': ['110'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']} @@ -431,6 +489,9 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #openshift_master_controllers_env_vars={"ENABLE_HTTP2": "true"} #openshift_node_env_vars={"ENABLE_HTTP2": "true"} +# Enable API service auditing, available as of 1.3 +#openshift_master_audit_config={"basicAuditEnabled": true} + # host group for masters [masters] ose3-master[1:3]-ansible.test.example.com diff --git a/inventory/byo/hosts.ose.example b/inventory/byo/hosts.ose.example index a599882f5..cdcbae723 100644 --- a/inventory/byo/hosts.ose.example +++ b/inventory/byo/hosts.ose.example @@ -6,6 +6,7 @@ masters nodes etcd lb +nfs # Set variables common for all OSEv3 hosts [OSEv3:vars] @@ -24,12 +25,26 @@ debug_level=2 # deployment type valid values are origin, online, atomic-enterprise, and openshift-enterprise deployment_type=openshift-enterprise +# Specify the generic release of OpenShift to install. This is used mainly just during installation, after which we +# rely on the version running on the first master. Works best for containerized installs where we can usually +# use this to lookup the latest exact version of the container images, which is the tag actually used to configure +# the cluster. For RPM installations we just verify the version detected in your configured repos matches this +# release. +openshift_release=v3.2 + +# Specify an exact container image tag to install or configure. +# WARNING: This value will be used for all hosts in containerized environments, even those that have another version installed. +# This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. +#openshift_image_tag=v3.2.0.46 + +# Specify an exact rpm version to install or configure. +# WARNING: This value will be used for all hosts in RPM based environments, even those that have another version installed. +# This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. +#openshift_pkg_version=-3.2.0.46 + # Install the openshift examples #openshift_install_examples=true -# Enable cluster metrics -#use_cluster_metrics=true - # Configure logoutURL in the master config for console customization # See: https://docs.openshift.org/latest/install_config/web_console_customization.html#changing-the-logout-url #openshift_master_logout_url=http://example.com @@ -75,6 +90,13 @@ deployment_type=openshift-enterprise # Default value: "--log-driver=json-file --log-opt max-size=50m" #openshift_docker_options="-l warn --ipv6=false" +# Specify exact version of Docker to configure or upgrade to. +# Downgrades are not supported and will error out. Be careful when upgrading docker from < 1.10 to > 1.10. +# docker_version="1.10.3" + +# Skip upgrading Docker during an OpenShift upgrade, leaves the current Docker version alone. +# docker_upgrade=False + # Alternate image format string. If you're not modifying the format string and # only need to inject your own registry you may want to consider # openshift_docker_additional_registries instead @@ -89,7 +111,7 @@ deployment_type=openshift-enterprise # htpasswd auth openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider', 'filename': '/etc/origin/master/htpasswd'}] # Defining htpasswd users -#openshift_master_htpasswd_users={'user1': '<pre-hashed password>', 'user2': '<pre-hashed password>' +#openshift_master_htpasswd_users={'user1': '<pre-hashed password>', 'user2': '<pre-hashed password>'} # or #openshift_master_htpasswd_file=<path to local pre-generated htpasswd file> @@ -140,6 +162,9 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #osm_mcs_labels_per_project=5 #osm_uid_allocator_range='1000000000-1999999999/10000' +# Configure additional projects +#openshift_additional_projects={'my-project': {'default_node_selector': 'label=value'}} + # Enable cockpit #osm_use_cockpit=true # @@ -220,10 +245,18 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # based on the number of nodes matching the openshift router selector. #openshift_hosted_router_replicas=2 # +# Router force subdomain (optional) +# A router path format to force on all routes used by this router +# (will ignore the route host value) +#openshift_hosted_router_force_subdomain='${name}-${namespace}.apps.example.com' +# # Router certificate (optional) # Provide local certificate paths which will be configured as the # router's default certificate. -#openshift_hosted_router_certificate={"certfile": "/path/to/router.crt", "keyfile": "/path/to/router.key"} +#openshift_hosted_router_certificate={"certfile": "/path/to/router.crt", "keyfile": "/path/to/router.key", "cafile": "/path/to/router-ca.crt"} +# +# Disable management of the OpenShift Router +#openshift_hosted_manage_router=false # Openshift Registry Options # @@ -239,7 +272,82 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Registry selector (optional) # Registry will only be created if nodes matching this label are present. # Default value: 'region=infra' -#openshift_registry_selector='region=infra' +#openshift_hosted_registry_selector='region=infra' +# +# Registry replicas (optional) +# Unless specified, openshift-ansible will calculate the replica count +# based on the number of nodes matching the openshift registry selector. +#openshift_hosted_registry_replicas=2 +# +# Disable management of the OpenShift Registry +#openshift_hosted_manage_registry=false + +# Registry Storage Options +# +# NFS Host Group +# An NFS volume will be created with path "nfs_directory/volume_name" +# on the host within the [nfs] host group. For example, the volume +# path using these options would be "/exports/registry" +#openshift_hosted_registry_storage_kind=nfs +#openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] +#openshift_hosted_registry_storage_nfs_directory=/exports +#openshift_hosted_registry_storage_nfs_options='*(rw,root_squash)' +#openshift_hosted_registry_storage_volume_name=registry +#openshift_hosted_registry_storage_volume_size=10Gi +# +# External NFS Host +# NFS volume must already exist with path "nfs_directory/_volume_name" on +# the storage_host. For example, the remote volume path using these +# options would be "nfs.example.com:/exports/registry" +#openshift_hosted_registry_storage_kind=nfs +#openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] +#openshift_hosted_registry_storage_host=nfs.example.com +#openshift_hosted_registry_storage_nfs_directory=/exports +#openshift_hosted_registry_storage_volume_name=registry +#openshift_hosted_registry_storage_volume_size=10Gi +# +# Openstack +# Volume must already exist. +#openshift_hosted_registry_storage_kind=openstack +#openshift_hosted_registry_storage_access_modes=['ReadWriteOnce'] +#openshift_hosted_registry_storage_openstack_filesystem=ext4 +#openshift_hosted_registry_storage_openstack_volumeID=3a650b4f-c8c5-4e0a-8ca5-eaee11f16c57 +#openshift_hosted_registry_storage_volume_size=10Gi +# +# AWS S3 +# S3 bucket must already exist. +#openshift_hosted_registry_storage_kind=object +#openshift_hosted_registry_storage_provider=s3 +#openshift_hosted_registry_storage_s3_accesskey=aws_access_key_id +#openshift_hosted_registry_storage_s3_secretkey=aws_secret_access_key +#openshift_hosted_registry_storage_s3_bucket=bucket_name +#openshift_hosted_registry_storage_s3_region=bucket_region +#openshift_hosted_registry_storage_s3_chunksize=26214400 +#openshift_hosted_registry_pullthrough=true + +# Metrics Storage Options +# +# NFS Host Group +# An NFS volume will be created with path "nfs_directory/volume_name" +# on the host within the [nfs] host group. For example, the volume +# path using these options would be "/exports/metrics" +#openshift_hosted_metrics_storage_kind=nfs +#openshift_hosted_metrics_storage_access_modes=['ReadWriteOnce'] +#openshift_hosted_metrics_storage_nfs_directory=/exports +#openshift_hosted_metrics_storage_nfs_options='*(rw,root_squash)' +#openshift_hosted_metrics_storage_volume_name=metrics +#openshift_hosted_metrics_storage_volume_size=10Gi +# +# External NFS Host +# NFS volume must already exist with path "nfs_directory/_volume_name" on +# the storage_host. For example, the remote volume path using these +# options would be "nfs.example.com:/exports/metrics" +#openshift_hosted_metrics_storage_kind=nfs +#openshift_hosted_metrics_storage_access_modes=['ReadWriteOnce'] +#openshift_hosted_metrics_storage_host=nfs.example.com +#openshift_hosted_metrics_storage_nfs_directory=/exports +#openshift_hosted_metrics_storage_volume_name=metrics +#openshift_hosted_metrics_storage_volume_size=10Gi # Configure the multi-tenant SDN plugin (default is 'redhat/openshift-ovs-subnet') # os_sdn_network_plugin_name='redhat/openshift-ovs-multitenant' @@ -247,11 +355,22 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Disable the OpenShift SDN plugin # openshift_use_openshift_sdn=False -# Configure SDN cluster network CIDR block. This network block should -# be a private block and should not conflict with existing network -# blocks in your infrastructure that pods may require access to. -# Can not be changed after deployment. +# Configure SDN cluster network and kubernetes service CIDR blocks. These +# network blocks should be private and should not conflict with network blocks +# in your infrastructure that pods may require access to. Can not be changed +# after deployment. #osm_cluster_network_cidr=10.1.0.0/16 +#openshift_portal_net=172.30.0.0/16 + + +# ExternalIPNetworkCIDRs controls what values are acceptable for the +# service external IP field. If empty, no externalIP may be set. It +# may contain a list of CIDRs which are checked for access. If a CIDR +# is prefixed with !, IPs in that CIDR will be rejected. Rejections +# will be applied first, then the IP checked against one of the +# allowed CIDRs. You should ensure this range does not overlap with +# your nodes, pods, or service CIDRs for security reasons. +#openshift_master_external_ip_network_cidrs=['0.0.0.0/0'] # Configure number of bits to allocate to each host’s subnet e.g. 8 # would mean a /24 network on the host. @@ -264,19 +383,38 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # set RPM version for debugging purposes #openshift_pkg_version=-3.1.0.0 -# Configure custom named certificates +# Configure custom ca certificate +#openshift_master_ca_certificate={'certfile': '/path/to/ca.crt', 'keyfile': '/path/to/ca.key'} +# +# NOTE: CA certificate will not be replaced with existing clusters. +# This option may only be specified when creating a new cluster or +# when redeploying cluster certificates with the redeploy-certificates +# playbook. If replacing the CA certificate in an existing cluster +# with a custom ca certificate, the following variable must also be +# set. +#openshift_certificates_redeploy_ca=true + +# Configure custom named certificates (SNI certificates) +# +# https://docs.openshift.com/enterprise/latest/install_config/certificate_customization.html +# # NOTE: openshift_master_named_certificates is cached on masters and is an # additive fact, meaning that each run with a different set of certificates # will add the newly provided certificates to the cached set of certificates. +# +# An optional CA may be specified for each named certificate. CAs will +# be added to the OpenShift CA bundle which allows for the named +# certificate to be served for internal cluster communication. +# # If you would like openshift_master_named_certificates to be overwritten with # the provided value, specify openshift_master_overwrite_named_certificates. #openshift_master_overwrite_named_certificates=true # # Provide local certificate paths which will be deployed to masters -#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key"}] +#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "cafile": "/path/to/custom-ca1.crt"}] # # Detected names may be overridden by specifying the "names" key -#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "names": ["public-master-host.com"]}] +#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "names": ["public-master-host.com"], "cafile": "/path/to/custom-ca1.crt"}] # Session options #openshift_master_session_name=ssn @@ -310,57 +448,6 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Configure dnsIP in the node config #openshift_dns_ip=172.30.0.1 -# Persistent Storage Options -# -## Registry Storage Options -## -## Storage Kind -## Specifies which storage kind will be used for the registry. -## "nfs" and "openstack" are supported kinds at this time. -##openshift_hosted_registry_storage_kind=nfs -## -## Persistent Volume Access Mode -## When using the 'openstack' storage kind, this has to be 'ReadWriteOnce' -##openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] -## -## Registry Volume Name -## Specify the storage volume name. This directory will be created -## within openshift_hosted_registry_storage_nfs_directory if -## specifying an [nfs] group. Ex. /exports/registry -## This variable must be supplied if using a pre-existing nfs server. -##openshift_hosted_registry_storage_volume_name=registry -## -## NFS Specific Options -## -## Storage Host -## This variable can be used to identify a pre-existing storage host -## if a storage host group corresponding to the storage kind (such as -## [nfs]) is not specified, -##openshift_hosted_registry_storage_host=nfs.example.com -## -## NFS Export Options -##openshift_hosted_registry_storage_nfs_options='*(rw,root_squash)' -## -## NFS Export Directory -## Specify the root exports directory. This directory will be created -## if specifying an [nfs] host group. -## This variable must be supplied if using a pre-existing nfs server. -##openshift_hosted_registry_storage_nfs_directory=/exports -## -## Openstack Specific Options -## -## Openstack Volume ID -## Specify the identifier of the volume to use for the registry. -## At this time, the volume has to be created manually by the administrator. -##openshift_hosted_registry_storage_openstack_volumeID=3a650b4f-c8c5-4e0a-8ca5-eaee11f16c57 -## -## Openstack Volume Size -##openshift_hosted_registry_storage_volume_size=10Gi -## -## Openstack Volume Filesystem -## Specify the filesystem that will be used when formatting the volume -##openshift_hosted_registry_storage_openstack_filesystem=ext4 - # Configure node kubelet arguments #openshift_node_kubelet_args={'max-pods': ['110'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']} @@ -425,6 +512,9 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #openshift_master_controllers_env_vars={"ENABLE_HTTP2": "true"} #openshift_node_env_vars={"ENABLE_HTTP2": "true"} +# Enable API service auditing, available as of 3.2 +#openshift_master_audit_config={"basicAuditEnabled": true} + # host group for masters [masters] ose3-master[1:3]-ansible.test.example.com |