diff options
Diffstat (limited to 'inventory/byo')
-rw-r--r-- | inventory/byo/hosts.aep.example | 63 | ||||
-rw-r--r-- | inventory/byo/hosts.origin.example | 63 | ||||
-rw-r--r-- | inventory/byo/hosts.ose.example | 63 |
3 files changed, 132 insertions, 57 deletions
diff --git a/inventory/byo/hosts.aep.example b/inventory/byo/hosts.aep.example index c18a423bf..5376dd353 100644 --- a/inventory/byo/hosts.aep.example +++ b/inventory/byo/hosts.aep.example @@ -187,6 +187,13 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Override the default pod eviction timeout #openshift_master_pod_eviction_timeout=5m +# Override the default oauth tokenConfig settings: +# openshift_master_access_token_max_seconds=86400 +# openshift_master_auth_token_max_seconds=500 + +# Override master servingInfo.maxRequestsInFlight +#openshift_master_max_requests_inflight=500 + # default storage plugin dependencies to install, by default the ceph and # glusterfs plugin dependencies will be installed, if available. #osn_storage_plugin_deps=['ceph','glusterfs','iscsi'] @@ -308,9 +315,22 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', ## ## Storage Kind ## Specifies which storage kind will be used for the registry. -## "nfs" is the only supported kind at this time. +## "nfs" and "openstack" are supported kinds at this time. ##openshift_hosted_registry_storage_kind=nfs ## +## Persistent Volume Access Mode +## When using the 'openstack' storage kind, this has to be 'ReadWriteOnce' +##openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] +## +## Registry Volume Name +## Specify the storage volume name. This directory will be created +## within openshift_hosted_registry_storage_nfs_directory if +## specifying an [nfs] group. Ex. /exports/registry +## This variable must be supplied if using a pre-existing nfs server. +##openshift_hosted_registry_storage_volume_name=registry +## +## NFS Specific Options +## ## Storage Host ## This variable can be used to identify a pre-existing storage host ## if a storage host group corresponding to the storage kind (such as @@ -326,18 +346,22 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', ## This variable must be supplied if using a pre-existing nfs server. ##openshift_hosted_registry_storage_nfs_directory=/exports ## -## Registry Volume Name -## Specify the storage volume name. This directory will be created -## within openshift_hosted_registry_storage_nfs_directory if -## specifying an [nfs] group. Ex. /exports/registry -## This variable must be supplied if using a pre-existing nfs server. -##openshift_hosted_registry_storage_volume_name=registry +## Openstack Specific Options ## -## Persistent Volume Access Mode -##openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] +## Openstack Volume ID +## Specify the identifier of the volume to use for the registry. +## At this time, the volume has to be created manually by the administrator. +##openshift_hosted_registry_storage_openstack_volumeID=3a650b4f-c8c5-4e0a-8ca5-eaee11f16c57 +## +## Openstack Volume Size +##openshift_hosted_registry_storage_volume_size=10Gi +## +## Openstack Volume Filesystem +## Specify the filesystem that will be used when formatting the volume +##openshift_hosted_registry_storage_openstack_filesystem=ext4 # Configure node kubelet arguments -#openshift_node_kubelet_args={'max-pods': ['40'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']} +#openshift_node_kubelet_args={'max-pods': ['110'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']} # Configure logrotate scripts # See: https://github.com/nickhammond/ansible-logrotate @@ -365,19 +389,20 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # # Most environments don't require a proxy between openshift masters, nodes, and # etcd hosts. So automatically add those hostnames to the openshift_no_proxy list. -# If all of your hosts share a common domain you may wish to disable this and +# If all of your hosts share a common domain you may wish to disable this and # specify that domain above. -#openshift_generate_no_proxy_hosts: True +#openshift_generate_no_proxy_hosts=True # # These options configure the BuildDefaults admission controller which injects -# environment variables into Builds. These values will default to their -# corresponding values above but you may set them independently. See BuildDefaults +# environment variables into Builds. These values will default to the global proxy +# config values. You only need to set these if they differ from the global settings +# above. See BuildDefaults # documentation at https://docs.openshift.org/latest/admin_guide/build_defaults_overrides.html -#openshift_builddefaults_http_proxy=openshift_http_proxy -#openshift_builddefaults_https_proxy=openshift_https_proxy -#openshift_builddefaults_no_proxy=openshift_noproxy -#openshift_builddefaults_git_http_proxy=openshift_builddefaults_http_proxy -#openshift_builddefaults_git_https_proxy=openshift_builddefaults_https_proxy +#openshift_builddefaults_http_proxy=http://USER:PASSWORD@HOST:PORT +#openshift_builddefaults_https_proxy=https://USER:PASSWORD@HOST:PORT +#openshift_builddefaults_no_proxy=build_defaults +#openshift_builddefaults_git_http_proxy=http://USER:PASSWORD@HOST:PORT +#openshift_builddefaults_git_https_proxy=https://USER:PASSWORD@HOST:PORT # Or you may optionally define your own serialized as json #openshift_builddefaults_json='{"BuildDefaults":{"configuration":{"apiVersion":"v1","env":[{"name":"HTTP_PROXY","value":"http://proxy.example.com.redhat.com:3128"},{"name":"NO_PROXY","value":"ose3-master.example.com"}],"gitHTTPProxy":"http://proxy.example.com:3128","kind":"BuildDefaultsConfig"}}}' diff --git a/inventory/byo/hosts.origin.example b/inventory/byo/hosts.origin.example index 28298d940..cfbb7ff8c 100644 --- a/inventory/byo/hosts.origin.example +++ b/inventory/byo/hosts.origin.example @@ -192,6 +192,13 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Override the default pod eviction timeout #openshift_master_pod_eviction_timeout=5m +# Override the default oauth tokenConfig settings: +# openshift_master_access_token_max_seconds=86400 +# openshift_master_auth_token_max_seconds=500 + +# Override master servingInfo.maxRequestsInFlight +#openshift_master_max_requests_inflight=500 + # default storage plugin dependencies to install, by default the ceph and # glusterfs plugin dependencies will be installed, if available. #osn_storage_plugin_deps=['ceph','glusterfs','iscsi'] @@ -313,9 +320,22 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', ## ## Storage Kind ## Specifies which storage kind will be used for the registry. -## nfs is the only supported kind at this time. +## "nfs" and "openstack" are supported kinds at this time. ##openshift_hosted_registry_storage_kind=nfs ## +## Persistent Volume Access Mode +## When using the 'openstack' storage kind, this has to be 'ReadWriteOnce' +##openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] +## +## Registry Volume Name +## Specify the storage volume name. This directory will be created +## within openshift_hosted_registry_storage_nfs_directory if +## specifying an [nfs] group. Ex. /exports/registry +## This variable must be supplied if using a pre-existing nfs server. +##openshift_hosted_registry_storage_volume_name=registry +## +## NFS Specific Options +## ## Storage Host ## This variable can be used to identify a pre-existing storage host ## if a storage host group corresponding to the storage kind (such as @@ -331,18 +351,22 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', ## This variable must be supplied if using a pre-existing nfs server. ##openshift_hosted_registry_storage_nfs_directory=/exports ## -## Registry Volume Name -## Specify the storage volume name. This directory will be created -## within openshift_hosted_registry_storage_nfs_directory if -## specifying an [nfs] group. Ex: /exports/registry -## This variable must be supplied if using a pre-existing nfs server. -##openshift_hosted_registry_storage_volume_name=registry +## Openstack Specific Options ## -## Persistent Volume Access Mode -##openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] +## Openstack Volume ID +## Specify the identifier of the volume to use for the registry. +## At this time, the volume has to be created manually by the administrator. +##openshift_hosted_registry_storage_openstack_volumeID=3a650b4f-c8c5-4e0a-8ca5-eaee11f16c57 +## +## Openstack Volume Size +##openshift_hosted_registry_storage_volume_size=10Gi +## +## Openstack Volume Filesystem +## Specify the filesystem that will be used when formatting the volume +##openshift_hosted_registry_storage_openstack_filesystem=ext4 # Configure node kubelet arguments -#openshift_node_kubelet_args={'max-pods': ['40'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']} +#openshift_node_kubelet_args={'max-pods': ['110'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']} # Configure logrotate scripts # See: https://github.com/nickhammond/ansible-logrotate @@ -370,19 +394,20 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # # Most environments don't require a proxy between openshift masters, nodes, and # etcd hosts. So automatically add those hostnames to the openshift_no_proxy list. -# If all of your hosts share a common domain you may wish to disable this and +# If all of your hosts share a common domain you may wish to disable this and # specify that domain above. -#openshift_generate_no_proxy_hosts: True +#openshift_generate_no_proxy_hosts=True # # These options configure the BuildDefaults admission controller which injects -# environment variables into Builds. These values will default to their -# corresponding values above but you may set them independently. See BuildDefaults +# environment variables into Builds. These values will default to the global proxy +# config values. You only need to set these if they differ from the global settings +# above. See BuildDefaults # documentation at https://docs.openshift.org/latest/admin_guide/build_defaults_overrides.html -#openshift_builddefaults_http_proxy=openshift_http_proxy -#openshift_builddefaults_https_proxy=openshift_https_proxy -#openshift_builddefaults_no_proxy=openshift_noproxy -#openshift_builddefaults_git_http_proxy=openshift_builddefaults_http_proxy -#openshift_builddefaults_git_https_proxy=openshift_builddefaults_https_proxy +#openshift_builddefaults_http_proxy=http://USER:PASSWORD@HOST:PORT +#openshift_builddefaults_https_proxy=https://USER:PASSWORD@HOST:PORT +#openshift_builddefaults_no_proxy=build_defaults +#openshift_builddefaults_git_http_proxy=http://USER:PASSWORD@HOST:PORT +#openshift_builddefaults_git_https_proxy=https://USER:PASSWORD@HOST:PORT # Or you may optionally define your own serialized as json #openshift_builddefaults_json='{"BuildDefaults":{"configuration":{"apiVersion":"v1","env":[{"name":"HTTP_PROXY","value":"http://proxy.example.com.redhat.com:3128"},{"name":"NO_PROXY","value":"ose3-master.example.com"}],"gitHTTPProxy":"http://proxy.example.com:3128","kind":"BuildDefaultsConfig"}}}' diff --git a/inventory/byo/hosts.ose.example b/inventory/byo/hosts.ose.example index 38adfe572..2a8d4c02b 100644 --- a/inventory/byo/hosts.ose.example +++ b/inventory/byo/hosts.ose.example @@ -188,6 +188,13 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Override the default pod eviction timeout #openshift_master_pod_eviction_timeout=5m +# Override the default oauth tokenConfig settings: +# openshift_master_access_token_max_seconds=86400 +# openshift_master_auth_token_max_seconds=500 + +# Override master servingInfo.maxRequestsInFlight +#openshift_master_max_requests_inflight=500 + # default storage plugin dependencies to install, by default the ceph and # glusterfs plugin dependencies will be installed, if available. #osn_storage_plugin_deps=['ceph','glusterfs'] @@ -309,9 +316,22 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', ## ## Storage Kind ## Specifies which storage kind will be used for the registry. -## "nfs" is the only supported kind at this time. +## "nfs" and "openstack" are supported kinds at this time. ##openshift_hosted_registry_storage_kind=nfs ## +## Persistent Volume Access Mode +## When using the 'openstack' storage kind, this has to be 'ReadWriteOnce' +##openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] +## +## Registry Volume Name +## Specify the storage volume name. This directory will be created +## within openshift_hosted_registry_storage_nfs_directory if +## specifying an [nfs] group. Ex. /exports/registry +## This variable must be supplied if using a pre-existing nfs server. +##openshift_hosted_registry_storage_volume_name=registry +## +## NFS Specific Options +## ## Storage Host ## This variable can be used to identify a pre-existing storage host ## if a storage host group corresponding to the storage kind (such as @@ -327,18 +347,22 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', ## This variable must be supplied if using a pre-existing nfs server. ##openshift_hosted_registry_storage_nfs_directory=/exports ## -## Registry Volume Name -## Specify the storage volume name. This directory will be created -## within openshift_hosted_registry_storage_nfs_directory if -## specifying an [nfs] group Ex: /exports/registry -## This variable must be supplied if using a pre-existing nfs server. -##openshift_hosted_registry_storage_volume_name=registry +## Openstack Specific Options ## -## Persistent Volume Access Mode -##openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] +## Openstack Volume ID +## Specify the identifier of the volume to use for the registry. +## At this time, the volume has to be created manually by the administrator. +##openshift_hosted_registry_storage_openstack_volumeID=3a650b4f-c8c5-4e0a-8ca5-eaee11f16c57 +## +## Openstack Volume Size +##openshift_hosted_registry_storage_volume_size=10Gi +## +## Openstack Volume Filesystem +## Specify the filesystem that will be used when formatting the volume +##openshift_hosted_registry_storage_openstack_filesystem=ext4 # Configure node kubelet arguments -#openshift_node_kubelet_args={'max-pods': ['40'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']} +#openshift_node_kubelet_args={'max-pods': ['110'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']} # Configure logrotate scripts # See: https://github.com/nickhammond/ansible-logrotate @@ -366,19 +390,20 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # # Most environments don't require a proxy between openshift masters, nodes, and # etcd hosts. So automatically add those hostnames to the openshift_no_proxy list. -# If all of your hosts share a common domain you may wish to disable this and +# If all of your hosts share a common domain you may wish to disable this and # specify that domain above. -#openshift_generate_no_proxy_hosts: True +#openshift_generate_no_proxy_hosts=True # # These options configure the BuildDefaults admission controller which injects -# environment variables into Builds. These values will default to their -# corresponding values above but you may set them independently. See BuildDefaults +# environment variables into Builds. These values will default to the global proxy +# config values. You only need to set these if they differ from the global settings +# above. See BuildDefaults # documentation at https://docs.openshift.org/latest/admin_guide/build_defaults_overrides.html -#openshift_builddefaults_http_proxy=openshift_http_proxy -#openshift_builddefaults_https_proxy=openshift_https_proxy -#openshift_builddefaults_no_proxy=openshift_noproxy -#openshift_builddefaults_git_http_proxy=openshift_builddefaults_http_proxy -#openshift_builddefaults_git_https_proxy=openshift_builddefaults_https_proxy +#openshift_builddefaults_http_proxy=http://USER:PASSWORD@HOST:PORT +#openshift_builddefaults_https_proxy=https://USER:PASSWORD@HOST:PORT +#openshift_builddefaults_no_proxy=build_defaults +#openshift_builddefaults_git_http_proxy=http://USER:PASSWORD@HOST:PORT +#openshift_builddefaults_git_https_proxy=https://USER:PASSWORD@HOST:PORT # Or you may optionally define your own serialized as json #openshift_builddefaults_json='{"BuildDefaults":{"configuration":{"apiVersion":"v1","env":[{"name":"HTTP_PROXY","value":"http://proxy.example.com.redhat.com:3128"},{"name":"NO_PROXY","value":"ose3-master.example.com"}],"gitHTTPProxy":"http://proxy.example.com:3128","kind":"BuildDefaultsConfig"}}}' |