#ifndef PCIDRIVER_H_ #define PCIDRIVER_H_ /** * This is a full rewrite of the pciDriver. * New default is to support kernel 2.6, using kernel 2.6 APIs. * * This header defines the interface to the outside world. * * $Revision: 1.6 $ * $Date: 2008-01-24 14:21:36 $ * */ /* * Change History: * * $Log: not supported by cvs2svn $ * Revision 1.5 2008-01-11 10:15:14 marcus * Removed unused interrupt code. * Added intSource to the wait interrupt call. * * Revision 1.4 2006/11/17 18:44:42 marcus * Type of SG list can now be selected at runtime. Added type to sglist. * * Revision 1.3 2006/11/17 16:23:02 marcus * Added slot number to the PCI info IOctl. * * Revision 1.2 2006/11/13 12:29:09 marcus * Added a IOctl call, to confiure the interrupt response. (testing pending). * Basic interrupts are now supported. * * Revision 1.1 2006/10/10 14:46:52 marcus * Initial commit of the new pciDriver for kernel 2.6 * * Revision 1.7 2006/10/06 15:18:06 marcus * Updated PCI info and PCI cmd * * Revision 1.6 2006/09/25 16:51:07 marcus * Added PCI config IOctls, and implemented basic mmap functions. * * Revision 1.5 2006/09/18 17:13:12 marcus * backup commit. * * Revision 1.4 2006/09/15 15:44:41 marcus * backup commit. * * Revision 1.3 2006/08/15 11:40:02 marcus * backup commit. * * Revision 1.2 2006/08/12 18:28:42 marcus * Sync with the laptop * * Revision 1.1 2006/08/11 15:30:46 marcus * Sync with the laptop * */ #include #define PCIDRIVER_INTERFACE_VERSION 1 /**< Driver API version, only the pcilib with the same driver interface version is allowed */ /* Identifies the PCI-E Xilinx ML605 */ #define PCIE_XILINX_VENDOR_ID 0x10ee #define PCIE_ML605_DEVICE_ID 0x6024 /* Identifies the PCI-E IPE Hardware */ #define PCIE_IPECAMERA_DEVICE_ID 0x6081 #define PCIE_KAPTURE_DEVICE_ID 0x6028 /* Possible values for ioctl commands */ /* PCI mmap areas */ #define PCIDRIVER_BAR0 0 #define PCIDRIVER_BAR1 1 #define PCIDRIVER_BAR2 2 #define PCIDRIVER_BAR3 3 #define PCIDRIVER_BAR4 4 #define PCIDRIVER_BAR5 5 /* mmap mode of the device */ #define PCIDRIVER_MMAP_PCI 0 #define PCIDRIVER_MMAP_KMEM 1 /* Direction of a DMA operation */ #define PCIDRIVER_DMA_BIDIRECTIONAL 0 #define PCIDRIVER_DMA_TODEVICE 1//PCILIB_KMEM_SYNC_TODEVICE #define PCIDRIVER_DMA_FROMDEVICE 2//PCILIB_KMEM_SYNC_FROMDEVICE /* Possible sizes in a PCI command */ #define PCIDRIVER_PCI_CFG_SZ_BYTE 1 #define PCIDRIVER_PCI_CFG_SZ_WORD 2 #define PCIDRIVER_PCI_CFG_SZ_DWORD 3 /* Possible types of SG lists */ #define PCIDRIVER_SG_NONMERGED 0 #define PCIDRIVER_SG_MERGED 1 /* Maximum number of interrupt sources */ #define PCIDRIVER_INT_MAXSOURCES 16 #define KMEM_REF_HW 0x80000000 /**< Special reference to indicate hardware access */ #define KMEM_REF_COUNT 0x0FFFFFFF /**< Mask of reference counter (mmap/munmap), couting in mmaped memory pages */ #define KMEM_MODE_REUSABLE 0x80000000 /**< Indicates reusable buffer */ #define KMEM_MODE_EXCLUSIVE 0x40000000 /**< Only a single process is allowed to mmap the buffer */ #define KMEM_MODE_PERSISTENT 0x20000000 /**< Persistent mode instructs kmem_free to preserve buffer in memory */ #define KMEM_MODE_COUNT 0x0FFFFFFF /**< Mask of reuse counter (alloc/free) */ #define KMEM_FLAG_REUSE PCILIB_KMEM_FLAG_REUSE /**< Try to reuse existing buffer with the same use & item */ #define KMEM_FLAG_EXCLUSIVE PCILIB_KMEM_FLAG_EXCLUSIVE /**< Allow only a single application accessing a specified use & item */ #define KMEM_FLAG_PERSISTENT PCILIB_KMEM_FLAG_PERSISTENT /**< Sets persistent mode */ #define KMEM_FLAG_HW PCILIB_KMEM_FLAG_HARDWARE /**< The buffer may be accessed by hardware, the hardware access will not occur any more if passed to _free function */ #define KMEM_FLAG_FORCE PCILIB_KMEM_FLAG_FORCE /**< Force memory cleanup even if references are present */ #define KMEM_FLAG_MASS PCILIB_KMEM_FLAG_MASS /**< Apply to all buffers of selected use */ #define KMEM_FLAG_TRY PCILIB_KMEM_FLAG_TRY /**< Do not allocate buffers, try to reuse and fail if not possible */ #define KMEM_FLAG_REUSED PCILIB_KMEM_FLAG_REUSE /**< Indicates if buffer with specified use & item was already allocated and reused */ #define KMEM_FLAG_REUSED_PERSISTENT PCILIB_KMEM_FLAG_PERSISTENT /**< Indicates that reused buffer was persistent before the call */ #define KMEM_FLAG_REUSED_HW PCILIB_KMEM_FLAG_HARDWARE /**< Indicates that reused buffer had a HW reference before the call */ /* Types */ typedef struct { unsigned long version; /**< pcilib version */ unsigned long interface; /**< driver interface version */ unsigned long ioctls; /**< number of supporterd ioctls */ unsigned long reserved[5]; /**< reserved for the future use */ } pcilib_driver_version_t; typedef struct { int iommu; /**< Specifies if IOMMU is enabled or disabled */ int mps; /**< Maximum payload size */ unsigned long dma_mask; /**< DMA mask */ } pcilib_device_state_t; typedef struct { unsigned short vendor_id; unsigned short device_id; unsigned short bus; unsigned short slot; unsigned short func; unsigned short devfn; unsigned char interrupt_pin; unsigned char interrupt_line; unsigned int irq; unsigned long bar_start[6]; unsigned long bar_length[6]; unsigned long bar_flags[6]; } pcilib_board_info_t; typedef struct { unsigned long type; unsigned long pa; unsigned long size; unsigned long align; unsigned long use; unsigned long item; int flags; int handle_id; } kmem_handle_t; typedef struct { unsigned long addr; unsigned long size; } umem_sgentry_t; typedef struct { int handle_id; int type; int nents; umem_sgentry_t *sg; } umem_sglist_t; typedef struct { unsigned long vma; unsigned long size; int handle_id; int dir; } umem_handle_t; typedef struct { kmem_handle_t handle; int dir; } kmem_sync_t; typedef struct { unsigned long count; unsigned long timeout; // microseconds unsigned int source; } interrupt_wait_t; typedef struct { int size; int addr; union { unsigned char byte; unsigned short word; unsigned int dword; /* not strict C, but if not can have problems */ } val; } pci_cfg_cmd; /* ioctl interface */ /* See documentation for a detailed usage explanation */ /* * one of the problems of ioctl, is that requires a type definition. * This type is only 8-bits wide, and half-documented in * /Documentation/ioctl-number.txt. * previous SHL -> 'S' definition, conflicts with several devices, * so I changed it to be pci -> 'p', in the range 0xA0-BF */ #define PCIDRIVER_IOC_MAGIC 'p' #define PCIDRIVER_IOC_BASE 0xA0 #define PCIDRIVER_IOC_MMAP_MODE _IO( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 0 ) #define PCIDRIVER_IOC_MMAP_AREA _IO( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 1 ) #define PCIDRIVER_IOC_KMEM_ALLOC _IOWR( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 2, kmem_handle_t * ) #define PCIDRIVER_IOC_KMEM_FREE _IOW ( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 3, kmem_handle_t * ) #define PCIDRIVER_IOC_KMEM_SYNC _IOWR( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 4, kmem_sync_t * ) #define PCIDRIVER_IOC_UMEM_SGMAP _IOWR( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 5, umem_handle_t * ) #define PCIDRIVER_IOC_UMEM_SGUNMAP _IOW( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 6, umem_handle_t * ) #define PCIDRIVER_IOC_UMEM_SGGET _IOWR( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 7, umem_sglist_t * ) #define PCIDRIVER_IOC_UMEM_SYNC _IOW( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 8, umem_handle_t * ) #define PCIDRIVER_IOC_WAITI _IO( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 9 ) /* And now, the methods to access the PCI configuration area */ #define PCIDRIVER_IOC_PCI_CFG_RD _IOWR( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 10, pci_cfg_cmd * ) #define PCIDRIVER_IOC_PCI_CFG_WR _IOWR( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 11, pci_cfg_cmd * ) #define PCIDRIVER_IOC_PCI_INFO _IOWR( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 12, pcilib_board_info_t * ) /* Clear interrupt queues */ #define PCIDRIVER_IOC_CLEAR_IOQ _IO( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 13 ) #define PCIDRIVER_IOC_VERSION _IOR( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 14, pcilib_driver_version_t * ) #define PCIDRIVER_IOC_DEVICE_STATE _IOR( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 15, pcilib_device_state_t * ) #define PCIDRIVER_IOC_DMA_MASK _IO( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 16) #define PCIDRIVER_IOC_MPS _IO( PCIDRIVER_IOC_MAGIC, PCIDRIVER_IOC_BASE + 17) #define PCIDRIVER_IOC_MAX 17 #endif